Search results for "rubber"

The influence of preservation method and time on theδ13C value of dissolved inorganic carbon in water samples

2009

The precise delta(13)C value of dissolved inorganic carbon (DIC) is important for various types of ecological studies. Without a preservation agent, microbial degradation of organic compounds continues in water samples and the delta(13)C value of DIC will become more depleted with time. HgCl(2) or acidification is often used to prevent microbial activity in water samples collected for carbon isotope ratio analyses of DIC. Mercury compounds are toxic and result in waste disposal problems. Other inhibiting agents or preservation methods are therefore needed. Two possible solutions are to use copper sulphate (CuSO(4)) as a preservative agent or to acidify water samples with phosphoric acid (H(…

Heat shrinkable behavior, physico-mechanical and structure properties of electron beam cross-linked blends of high-density polyethylene with acryloni…

2016

Abstract In this study, heat-shrinkable composites of electron beam irradiated high-density polyethylene (HDPE) composites with acrylonitrile-butadiene rubber (NBR) were investigated. HDPE/NBR blends at a ratio of components 100/0, 90/10, 80/20, 50/50 and 20/80 wt% were prepared using a two-roll mill. The compression molded films were irradiated high-energy (5 MeV) accelerated electrons up to irradiation absorbed doses of 100–300 kGy. The effect of electron beam induced cross-linking was evaluated by the changes of mechanical properties, gel content and by the differences of thermal properties, detected by differential scanning calorimetry. The thermo-shrinkage forces were determined as the…

Electron beam induced polymerisation of MMA in the presence of rubber: a novel process to produce tough materials

2002

Abstract PMMA-rubber blends are formed through electron beam induced in situ polymerisation. The influence of rubber nature and irradiation dose has been investigated through mechanical tensile tests, solubility analysis and the results were related to material structure investigated through atomic force microscopy. Some blend formulations present a significant increase of ductility with respect to pure PMMA, without a dramatic decrease of modulus, yield stress and stress at break values. The results are interpreted on the basis of the criterion of the critical inter-particle thickness.

Mechanical characterisation and 3D fractional viscoelastic modelling of railway sub-ballast rubberised asphalt

Toward more realistic viscosity measurements of tyre rubber–bitumen blends

2014

AbstractThe measurement of rheological properties of the tyre rubber bitumen blends is often challenging due to presence of suspended tyre rubber’s crumbs. Furthermore, the phase separation during the course of measurements makes the viscosity of these non-homogeneous blends difficult to ascertain. In this study, a new dual helical impeller was designed and manufactured to be used with a rotational viscometer in order to have a real-time control of the viscosity while performing a laboratory mixing of the blends. Layer based manufacturing techniques showed to be a convenient method to produce complex shaped impeller prototypes before manufacturing the more expensive stainless steel assembly…

Optimisation of liquid rubber modified bitumen for road pavements and roofing applications

2020

Abstract Polymer Modified Bitumens (PMBs) are largely used for pavement and roofing membranes applications with Styrene-Butadiene-Styrene Block copolymer (SBS) playing a major role in both markets despite its constantly increasing price due to the rising demand for quality bitumen modifiers. On the other hand, there is an increasing trend of recycling end of life tyres generating Recycled Tyre Rubber (RTR) at affordable price. This investigation aims at engineering a modified bitumen with a combination of Liquid Rubber (LR), a homogeneous blend of 50–70% RTR pre-processed in combination with heavy oils, and a wax denominated Ethylene Bis Stearamide (EBS). In the first phase, the effect of L…

Improving the rheometry of rubberized bitumen: experimental and computation fluid dynamics studies

2017

Abstract Multi-phase materials are common in several fields of engineering and rheological measurements are intensively adopted for their development and quality control. Unfortunately, due to the complexity of these materials, accurate measurements can be challenging. This is the case of bitumen-rubber blends used in civil engineering as binders for several applications such as asphalt concrete for road pavements but recently also for roofing membranes. These materials can be considered as heterogeneous blends of fluid and particles with different densities. Due to this nature the two components tends to separate and this phenomenon can be enhanced with inappropriate design and mixing. Thi…

Effect of three prophylaxis methods on surface roughness of giomer

2010

Objectives: Plaque and stains are removed by prophylaxis methods from tooth surfaces. Since prophylaxis methods can have a detrimental effect on the surface finish of restorations, the aim of this in vitro study was to investigate the effect of three prophylaxis methods, including pumice with rubber cup, pumice with brush, and air-powder polishing device (APD) on the surface roughness of giomer. Study design: Sixty four cylindrical giomer (Beautifil II, Shofu) samples with a diameter of 6 mm and a height of 2 mm were used. Subsequent to a 3-month period of storage in distilled water at 37ºC, the samples were randomly divided into four groups of 16. In group 1 (control), no prophylaxis proce…

Effect of two prophylaxis methods on adherence of Streptococcus mutans to microfilled composite resin and giomer surfaces

2010

Objectives: Surface attributes of a restoration play an important role in adherence of plaque bacteria. Prophylaxis methods may be involved in modification of or damaging the restoration surface. The aim of the present study was to evaluate the effect of two prophylaxis methods on adherence of Streptococcus mutans to the surface of two restorative materials. Study design: A total of 60 specimens were prepared from each material; a microfilled composite resin (HelioProgress) and a giomer (Beautifil II). For each material, the specimens were randomly divided into three groups (n=20). Group 1: no prophylaxis treatment (control); Group 2: prophylaxis with pumice and rubber cup; Group 3: prophyl…

Joint Influence of Transverse Compression and Shear-Flexural Stiffness on Rubber V-Belt Mechanics

2009

The elasto-mechanical behavior of a rubber V-belt in the neighborhood of the seating and unseating regions of the pulley is affected by the transverse belt compliance, which produces a gradual radial penetration into the groove and by the shear-flexural deformation, which arches the belt line along the free strand away from the ideal straight path. These effects are always analyzed separately in the literature, but are in close correlation with each other. This lecture describes the matching between the free strand and the wrap region, showing a remarkable reduction of the belt arching and of the contact losses, with respect to the conventional theory.