Search results for "scanning electron"
showing 10 items of 667 documents
Structural, microstructural and impedance spectroscopy study of functional ferroelectric ceramic materials based on barium titanate
2013
The differences between the physical properties of barium titanate BaTiO3 and newly obtained BaHfxTi1-xO3 were identified. These ceramics were prepared by solid-phase reaction from simple oxides and carbonates using the conventional method. The structure and morphology of investigated samples were characterised by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The application of impedance spectroscopy made possible to characterize of these materials in the terms of electrical properties.
Microscopic evidence of a flat melting curve of tantalum
2010
International audience; New data on the high-pressure melting curve of Ta up to 48GPa are reported. Evidence of melting from changes in sample texture was found in five different experiments using scanning electron microscopy. The obtained melting temperatures are in excellent agreement with earlier measurements using x-ray diffraction or the laser-speckled method but are in contrast with several theoretical calculations. The results are also compared with shock-wave data. These findings are of geophysical relevance because they confirm the validity of earlier experimental techniques that resulted in low melting slopes of the transition metals measured in the diamond-anvil cell, including i…
Sol-gel synthesis and photocatalytic activity of ZnO-SnO2 nanocomposites
2014
Abstract ZnO–SnO 2 nanocomposites were synthesized by a facile sol–gel synthesis route and characterized through X-ray diffraction, BET specific surface area analysis, UV–vis diffuse reflectance spectroscopy, photoluminescence spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy. The photocatalytic activity of the samples was tested using the degradation of 4-nitrophenol under UV light as model reaction. The ZnO/SnO 2 molar ratio was varied in order to study its influence on the photoefficiency of the samples. The ZnO–SnO 2 nanocomposites showed higher photoactivity than the pure oxides and in particular the sample with ZnO/SnO 2 mol…
Photocatalytic behaviour of metal-loaded TiO2 aqueous dispersions and films
2007
Abstract Titanium dioxide nanoparticles loaded with Ce, Co, Eu, Sm, W and Yb species were prepared by coprecipitation in mild conditions using TiCl 4 as precursor with the aim to enhance the photocatalytic activity, especially under visible light irradiation. The photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), specific surface area (SSA) determination and UV–Vis diffuse reflectance spectroscopy. The photocatalytic activity of the powders of pure and loaded TiO 2 was investigated by employing the photodegradation of 4-nitrophenol as probe reaction in a liquid–solid system. Loading with suitable amounts of W, Co and Sm resulted in a significan…
Coupled Semiconductor Systems for Photocatalysis. Preparation and Characterization of Polycrystalline Mixed WO3/WS2 Powders
1999
Mixed WO3/WS2 powders were prepared by oxidation of WS2. The physical properties of the samples were characterized by X-ray diffraction, diffuse reflectance spectroscopy, and scanning electron microscopy; they were strongly dependent upon the time and temperature of oxidation. The chemical state and the elemental distribution of the sample surface were investigated by X-ray photoelectron spectroscopy. The photocatalytic results have showed that the aqueous suspensions of the mixed WO3/WS2 systems have significantly higher activities than pure WS2 and WO3 for the photodegradation of phenol. The enhanced performance can be related to the presence of heterojunctions WO3/WS2 on the single parti…
Muskelveränderungen durch Saugdrainagen Eine rasterelektronenmikroskopische, transmissionselektronenmikroskopische, lichtmikroskopische und morphomet…
1983
In die Ruckenmuskulatur von 22 mannlichen, ausgewachsenen Wistar-Ratten wurde ein Drainagesystem eingelegt und die Wirkung des Unterdruckes auf die Muskulatur analysiert. Nach kurzester Liegezeit waren die Drainagesysteme durch ein Koagulat verschlossen. Im Unterschied zu den Kontrolltieren, bei denen sich lediglich Fibrin-Gerinnsel und Erythrozyten-Konglomerationen fanden, sahen wir im Rasterelektronenmikroskop bei den mit Unterdruck behandelten Tieren intakte Muskeln im Lumen der Drainage. Fibrin, Muskelfasern und Erythrozyten bildeten einen Verschluspfropf, der das funktioneile System der Saugdrainage unwirksam werden lies. Veranderungen in drainagefernen Muskelbezirken konnten lichtmikr…
Random Laser Based on TiO2–Nanomembranes
2012
We demonstrated directional random laser emission from a dye-doped polymer film in the presence of a scattering medium consisting of TiO 2 nanomembranes. Evidence for coexistence of extended and localized modes are presented.
Processes during preparation of lead/acid battery positive plates from tetrabasic lead sulfate (4BS) pastes
1993
Abstract Tthe processes studied during this investigation were paste mixing and curing. Tetrabasic lead sulfate 4BS pastes were prepared by solution and paste methods both from α-PbO and mill oxides, and the development of 4BS was carried out already during the paste mixing stage. the 4BS pastes were characterized by SEM, TEM, XRD and wet-chemical methods, and the results were compared with those obtained from the characterization of corresponding tribasic lead sulfate (3BS) pastes. The preparation method was found to be one dominating factor affecting both the morphology and structure of 4BS active masses. The selection of raw material gave an additional effect on the morphology. Additiona…
An impedance study of complex Al/Cu-Al2O3electrode
2011
Electrochemical impedance spectroscopy (EIS) was used to investigate different Cu deposition regimes on Al surface obtained by internal electrolysis and to characterize properties of fabricated electrodes. EIS experimental data confirmed that Cu deposition by internal electrolysis is realized and the complex electrode system is obtained. The main difficulty in preparation of Al/Cu electrodes is to prevent aluminium oxidation before and during electrochemical deposition of Cu particles. In this work NaCl, CH3COONa, K2SO4, mono- and diammonium citrate electrolytes were examined to determine their suitability for impedance measurements. Al/Cu-Al2O3 electrode composition was approved by equival…
Study of the Growth Mechanism of some Oxide Scales on Alloy 230 in High Temperature Vapor Electrolysis (HTVE) Conditions
2012
Alloy 230 (also named Haynes® 230) was tested as interconnect for production of hydrogen via High Temperature Vapor Electrolysis (HTVE). Samples were oxidized at 800°C in the both atmospheres representative of the HTVE operating conditions: Ar-1%H2-9%H2O (for cathode side) and air (for anode side). The high temperature oxidation behaviour was studied in both atmospheres together with the electrical conductivity of the thermally grown oxide scales. Oxidation kinetics indicated lower oxidation rate in H2/H2O compared to air (kp = 3.8 .10-15 g2.cm-4.s-1 in H2/H2O and kp = 1.6 .10-14 g2.cm-4.s-1 in air). The corrosion products were characterized by scanning electron microscopy associated with X…