Search results for "scanning"
showing 10 items of 1808 documents
Statistical Analysis of a Method to Predict Drug–Polymer Miscibility
2015
In this study, a method proposed to predict drug-polymer miscibility from differential scanning calorimetry measurements was subjected to statistical analysis. The method is relatively fast and inexpensive and has gained popularity as a result of the increasing interest in the formulation of drugs as amorphous solid dispersions. However, it does not include a standard statistical assessment of the experimental uncertainty by means of a confidence interval. In addition, it applies a routine mathematical operation known as "transformation to linearity," which previously has been shown to be subject to a substantial bias. The statistical analysis performed in this present study revealed that t…
Temperature-controlled poly(propylene) glycol hydrophobicity on the formation of inclusion complexes with modified cyclodextrins. A DSC and ITC study.
2011
The study highlighted the main forces driving the formation of hydroxypropyl-cyclodextrins (HP-CDs) + poly(propylene) glycol 725 g mol(-1) inclusion complexes. The temperature parameter was chosen as the variable to modulate the hydrophobicity of the polymer, and consequently ITC experiments as functions of temperature as well as DSC measurements were done in a systematic way. The polymer is not included into HP-α-CD, it is strongly bound to HP-β-CD and it is floating in HP-γ-CD. The stability of the inclusion complexes is entropy controlled. The gain of the entropy is a unique result compared to the opposite literature findings for inclusion complexes based on polymers and CDs. This peculi…
Interaction Between drug loaded Polyaspartamide-polylactide-polisorbate based micelles and cell membrane models: a calorimetric study
2011
Amphiphilic biodegradable copolymers, for their ability to self-assemble into micelle-like aggregates, with a suitable loading capacity, are of emerging interest for the delivery of water-insoluble drugs. α,β-Poly[(N-hydroxyethyl)-dl-aspartamide] (PHEA) is suitable to obtain amphiphilic graft copolymers. These copolymers can be obtained starting from PHEA-ethylenediamine (PHEA-EDA) which is functionalized with polysorbate 80 (PS₈₀, like targeting residues to the brain) and polylactide (PLA, like hydrophobic chains) in order to obtain polymeric micelles of PHEA-EDA-PS₈₀-PLA potentially useful to release drugs to the central nervous system. In this paper, the interaction and absorption of PHE…
Synthesis of PP-LCP graft copolymers and their compatibilizing activity for PP/LCP blends
1998
The aim of this work was the synthesis of new graft copolymers consisting of polypropylene (PP) backbones and liquid crystalline polymer (LCP) branches, to be used as compatibilizing agents for PP/LCP blends. The PP-g-LCP copolymers have been prepared by polycondensation of the monomers of a semiflexible liquid crystalline polyester (SBH 1 : 1 : 2), that is, sebacic acid (S), 4,4′-dihydroxybiphenyl (B), and 4-hydroxybenzoic acid (H) in the mole ratio of 1 : 1 : 2, carried out in the presence of appropriate amounts of a commercial acrylic-acid-functionalized polypropylene (PPAA). The polycondensation products, referred to as COPP50 and COPP70, having a calculated PPAA concentration of 50 and…
Thermal and Mechanical Properties of Unvulcanized Polypropylene Blends with Different Elastomers: Ethylene-Propylene-Diene Terpolymer, Nitrile-Butadi…
2013
In this work, composites of isotactic polypropylene (PP) with three unvulcanized elastomers – terpolymer of ethylene-propylene-dicyclopentadiene (EPDM), chlorinated polyethylene (CPE) and copolymer of acrylonitrile-butadiene (NBR) – have been investigated. The purpose of the investigation was to create PP/elastomer blend composites of significantly different compositions (with an excess of PP, intermediate ones, and with an excess of elastomer) and to study the dependence of tensile behaviour and elastic properties on the blends with different component ratio. Tensile properties have been recognized from the stress-strain curves. The changes of elastic modulus have been characterized with r…
Necking behavior of low-density polyethylene-isotactic polypropylene blends: A morphological investigation
1984
The tensile behavior of low-density polyethylene-isotactic polypropylene blends was investigated at room temperature. Neck formation and propagation along the whole length of the samples were observed for the whole range of composition. This behavior, which is not indicated by most data available in the literature, was examined in relation to sample morphology by scanning electron microscopy. The results of this investigation indicated some differences between the morphology of these materials and the morphology of blends which do not undergo necking propagation.
Structure and Mechanical Properties of Melt Intercalated Po1lypropylene–Organomontmorillonite Nanocomposites
2010
The preparation and properties of polymer nanocomposites, obtained by melt-compounding of polypropylene (PP) and organomontmorillonite (OMMT) modified by different alkyl ammonium salts, are described. A copolymer of maleic anhydride and PP was used as a compatibilizing additive. Nanocomposites with OMMT content of 1, 5 and 10 wt% were prepared and tested. The influence of OMMT content on the tensile stress–strain curves, elastic modulus, yield and tensile strength, and ultimate elongation of the nanocomposites is determined. The results of measuring the microhardness and impact strength of polymer nanocomposites are presented. Long-term creep tests were performed to predict the long-term de…
Improved experimental characterization of crystallization kinetics
2005
Polymer solidification occurring in many processes, like for instance injection molding, compression molding and extrusion, is a complex phenomenon, strongly influenced by the thermo-mechanical history experienced by the material during processing. From this point of view, characterization of polymer crystallization in the range of processing con- ditions, i.e. including high cooling rate, is of great technological and academic interest. Quiescent, non-isothermal crys- tallization kinetics of two polypropylene resins were investigated using a new method, based on fast cooling of thin samples with air/water sprays and optical detection of the crystallization phenomenon. The range of cooling …
A study of spalling behaviour of PAN fibre-reinforced concrete by thermal analysis
1993
Comparisons are made between polypropylene (PP) fibres and polyacrylonitrile (PAN) fibres in order to relate the thermal properties of fibres with the respective fibre mortar behaviour under thermal exposure. Thermogravimetry (TG), differential scanning calorimetry (DSC) and thermochromatography (ThGC) are utilized. When a cementitious fibre mortar is being heated, several physical phenomena occur in the temperature range between 100°C and 200°C. There is a significant difference in the thermal behaviour between PP and PAN fibres. PP fibres melt at 160–170°C. The non‐melting behaviour of PAN fibre together with its rapid exothermic degradation reactions at around 300°C may add risk to the s…
Investigations of polymerizable multilayers as gas separation membranes
1985
Abstract Polymerizable Langmuir—Blodgett (LB) multilayers of several diacetylenic amphiphiles were investigated on gas-permeable, polymeric supports. Macroscopically homogeneous multilayer films of hexacosa-10,12-diynoic acid and pentacosa-10,12-diyne phosphonate could be built up on polypropylene and polytetrafluoroethylene materials. As shown by scanning electron microscopy, the microscopic homogeneity of the built-up multilayers was mainly controlled by the surface structure of the support material, whereas the chemical nature of the support and photopolymerization of the layers did not affect the high order of the films. Such LB multilayers deposited on porous support materials are able…