Search results for "sinter"
showing 10 items of 190 documents
Mechanical, thermal and electrical properties of nanostructured CNTs/SiC composites
2018
International audience; Dense SiC-based nanostructured composites reinforced by well-distributed carbon nanotubes (CNTs) were elaborated for the first time by spark plasma sintering (SPS) without sintering additive. Microstructures of materials containing different amounts of CNTs – up to 8.0 vol% – were correlated with their mechanical, electrical and thermal properties. A continuous decrease of the SiC grain size was observed when the amount of CNT was increased, while the evolution of density showed a different behavior that could be explained by the particular combination of SPS technique with the electrical resistivity evolution of the green bodies. Optimal effect of CNTs addition on h…
Environmental and depositional controls on laminated freshwater carbonates: An example from the Roman aqueduct of Patara, Turkey
2013
Carbonate deposits in aqueducts are a new high-resolution data source for environmental changes during the time of the Roman Empire, notably in the fields of palaeoclimate and spring hydrology. In order to distinguish environmental effects from those related to depositional setting, laminated carbonate deposits were compared along the entire length of an ancient aqueduct channel at Patara, Turkey. The carbonate deposits, up to 80mm in thickness, are composed of lamina couplets up to 1mm thick of alternating porous microspar and dense, columnar sparite. The former formed in the dry, warm season and the latter in the wet, cool season. The presence of biofilms seems to play a role in the devel…
Effect of different sintering process on flexural strength of translucency monolithic zirconia
2018
Background Sintering process is responsible for the strength of zirconia restoration. This study evaluated the effect of different sintering temperatures and sintered-holding times on flexural strength of translucency monolithic zirconia. Material and Methods One hundred and thirty five zirconia bar specimens (width-length-thickness = 10×20×1.5 mm) were prepared from yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) ceramic and randomly divided into nine groups to be sintered at different temperatures [decreasing- (SD, 1350°C), regular- (SR, 1450°C), and increasing- (SI, 1550°C) sintering temperature] and different sintered-holding times [shortening- (HS, 60 min), regular- (HR, …
The Influence of the Digitalisation of the Distribution Channel in the Process of Bypassing Wholesalers: The Case of a Distribution Triad
2022
• ObjectivesThe wholesaler, a traditional player in distribution, has been going through a new phase in its evolution over the last twenty years. Driven by the digitalisation of activities, upstream and downstream players are trying to bypass it and new players such as commercial platforms are appearing. In order to understand this phenomenon, this research analyses how the wholesaler manages to keep a part of the flows between the actors of the distribution channel.• MethodA qualitative analysis by individual interviews within the building materials sector highlights the appropriation of informational flows by manufacturers leading to the phenomenon of partial disintermediation which affec…
Resistance of traditional wholesalers: a dichotomy of flows within the distribution channel
2020
The wholesaler has often been threatened with the risk of disintermediation both upstream and downstream of the distribution channel. Wholesalers, in their role as intermediaries, remain established in many sectors. The Internet has also generated a current of re-intermediation via digital platforms. The article starts from the premise that wholesalers are always essential players in the distribution channel and increase their value proposition through services and digital. As part of a qualitative study in the French market for the sale of building materials, an interesting phenomenon emerged. It is the partial disintermediation of wholesalers for the benefit of industrialists. This partia…
Metal-support interaction and redox behavior of Pt(1 wt %)/Ce0.6Zr0.4O2
2006
The catalyst Pt(1 wt %)/Ce(0.6)Zr(0.4)O(2) is studied by CO-temperature programmed reduction (CO-TPR), isothermal oxygen storage complete capacity (OSCC), X-ray absorption spectroscopy (XAS) at the Pt L(III) edge, and in situ X-ray diffraction (in situ XRD), with the aim of elucidating the role of supported metal in CO oxidation by ceria-based three-way catalysts (TWC). The redox behavior of Pt(1 wt %)/Ce(0.6)Zr(0.4)O(2) is compared to that of bare ceria-zirconia. OSCC of redox-aged Pt/ceria-zirconia is twice that of bare ceria-zirconia, and the maximum of CO consumption occurs at a temperature about 300 K lower than redox-aged ceria-zirconia. XAS analysis allows one to evidence the formati…
Manufacturing and characterization of single cell intermediate-temperature solid oxide fuel cells for APU in transportation application
2014
The fabrications of large area IT-SOFC planar cell by new simple and cost effective process were explained. The optimization of the new process with respect to pore formers, thickness of layers, sintering temperature were performed. The electrochemical results of 10cm2 performed in Fiaxell open flange set up were detailed with respect to different configuration. Long term ageing performance tests of single cells were conducted in Fiaxell device and results are discussed. Preparation of new test bench and stacking process performed till now were briefed.
Elaboration de matériaux à gradient de propriétés fonctionnelles pour les composants face au plasma des machines de fusion thermonucléaires
2014
The objective of this study was to develop a Functionally Graded Material (FGM) W / Cu to replace the compliance layer (Cu-OFHC) in the plasma facing components of thermonuclear fusion reactor like ITER. The peculiarity of this work is to elaborate these materials without exceeding the melting temperature of copper in order to control its microstructure. The co-sintering is the most attractive solution to achieve this goal.The first phase of this study has been to decrease the sintering temperature of the tungsten to achieve this co-sintering. The elaboration of a Functionally Graded Materials being delicate, thermo-mechanical calculations were performed in order to determine the number and…
Flash microwave synthesis and sintering of nanosized La0.75Sr0.25Cr0.93Ru0.07o3–δ for fuel cell application.
2009
International audience; Perovskite-oxide nanocrystals of La0.75Sr0.25Cr0.93Ru0.07O3–δ with a mean size around 10 nm were prepared by microwave flash synthesis. This reaction was performed in alcoholic solution using metallic salts, sodium ethoxide and microwave autoclave. The obtained powder was characterised after purification by energy dispersive X-ray analysis (EDX), X-ray powder diffraction (XRD), BET adsorption technique, photon correlation spectroscopy (PCS) and transmission electron microscopy (TEM). The results show that integrated perovskite-type phase and uniform particle size were obtained in the microwave treated samples. At last the synthesised powder was directly used in a sin…
Ceramique/metal component elaborated by flash sintering for ballistic protection
2012
This dissertation describes the synthesis of new components for ballistic protection with the assistance of flash sintering. Indeed, the objective is to associate two compounds showing very different sintering temperatures – such as alumina and aluminum, two reference materials for ballistic protection applications.The first synthesis method tested was the elaboration of a bi-material via the sintering of aluminump owder on alumina bulks. This study permitted to observe the formation of the alumina/aluminum bonding by scanning and transmission electron microscopy and to optimize the assembly parameters in order to obtain a bimaterials howing a strong interfacial cohesion. Adapted characteri…