Search results for "solides"
showing 7 items of 7 documents
Springback of thick sheet AHSS subject to bending under tension
2012
Lien vers la version éditeur : http://www.sciencedirect.com/science/article/pii/S0020740312000677 The springback behavior of four advanced high-strength sheet steels (Dual-Phase, TRIP, ferrite-bainite) with thicknesses ranging from 1.2 to 4 mm was investigated by means of the bending-under-tension (BUT) test. The applicability of several guidelines from the literature was investigated experimentally and numerically. The monotonic decrease of springback as back force increased was confirmed for this category of sheet steels, and a general trend for the non-linear influence of the tool radius was observed. The influence of numerical factors on the predicted values of springback was investigat…
Development of LIBS for online analysis of solid nuclear materials
2015
With the objective to implement a fast, online analysis technique for control of solid metal nuclear materials, laser-induced breakdown spectroscopy (LIBS) technique is developed for quantitative analysis in uranium and plutonium. Since these matrices have a very dense emission spectrum in the UV-Visible range, the Vacuum Ultra-Violet (VUV) spectral range, less rich in lines, is explored. The aim of this thesis is to perform the analytical development of VUV-LIBS for quantitative analysis between 500 and 5000 ppm with an uncertainty of 3%. For that purpose, four steps were defined. First, for practical and safety reasons, it is generally better to perform experiments on surrogate materials.…
Study of the high temperature behaviour of titanium alloy Ti6242S under complex atmospheres : aeronautical applications
2018
The use of titanium alloys in many applications (transport, energy, chemistry,...) allows significant weight savings in relation to the good mechanical properties/density ratio of these materials. Since titanium alloys are employed at high temperatures (T>500°C), their behavior in such conditions has to be studied in severe conditions in order to understand degradation mechanisms. Moreover, some specific conditions can be met during application, like thermal cycling, water vapour or presence of salts. These parameters are known to influence oxidation behavior of titanium alloys.In this thesis work, oxidation behavior of an aeronautics titanium alloy (Ti6242S) has been studied in air and moi…
Investigation of thick sheet AHSS springback in combined bending under tension
2012
In this paper, we investigate the springback behavior of several advanced high-strength sheet steels (TRIP, Dual-Phase, ferrite-bainite) with thicknesses up to 4 mm. Samples were tested by means of the bending-under-tension (BUT) test. The BUT has been extensively applied, in the literature, to relatively thin (1 mm and thinner) sheet metals for automotive applications; the applicability of several guidelines from the literature was investigated in this work in the context of thick advanced high strength steel (AHSS) sheets and using a sample width of 12 mm. The monotonic decrease of springback as back force increased was confirmed for this category of sheet steels, and a general trend for …
Rovibrational spectroscopy of ethylene : Stark effect : Application to ethylene in zeolites
2010
The objective of this report is to present a study as complete as possible of the Stark effect in the asymmetric top molecules of X2Y4 type possessing the D2h symmetry group and to apply it to the problem of the spectroscopy of the ethylene molecule trapped in a zeolite. For the first time, a tensorial formalism adapted to the study of the Stark effect for the O(3) D2h group chain was developed. In parallel, a computer package was worked out as a new generation of software called D2hTDS-ST using a simpler basis, allowing an economy in the calculation time. On the basis of the theoretical and computing tools as well as from the experimental spectra, recorded in the laboratory, we made a firs…
Modélisation numérique avec apport de matière du soudo-brasage des assemblages hétérogènes acier/aluminium
2007
This study deals with the numerical simulation of heterogeneous brazing of steel / aluminium alloy sheets by CMT process. The difference between the linear expansion coefficients of these materials generates high deformations and residual stress. The addiction of brazing material is simulated. A validation the model is made in the simplest case of a sheet of aluminium alloy with a brazing bead. Comparisons are made between numerical and experimental results on out-of-plane displacements of steel / aluminium assembly.
Equilibres divariants entre la vapeur d'eau et les hydrates solides : Caractérisation de la nature de la solution solide, limites du domaine de divar…
1972
National audience; Nous avons récemment proposé (1, 2) deux modèles thermodynamiques pour les équilibres divariants entre la vapeur d'eau et les hydrates salins solides. Le premier postule l'existence d'une solution solide d'insertion d'eau dans le sel, le second postule l'existence d'une solution solide de substitution entre deux hydrates du sel. Le but de ce travail est d'établir un nouveau critère permettant de distinguer les deux modèles à partir de l'expérience et de délimiter le domaine divariant dans chacun des deux cas. Nous supposerons, sauf mention contraire, que la solution d'insertion obéit à la loi de Henry par rapport à l'eau et que la solution de substitution est idéale. Nous…