Search results for "sorption model"
showing 10 items of 40 documents
Adsorption isotherms and thermal behavior of hybrids based on quercetin and inorganic fillers
2019
We investigated the adsorption process of quercetin onto several inorganic fillers, such as kaolinite, calcium carbonate and alumina. Firstly, we performed equilibrium adsorption studies in order to determine the quercetin/filler adsorption isotherms, which were successfully fitted through the Langmuir model. Based on the adsorption data analysis, we estimated the maximum adsorption capacity of each filler as well as the Langmuir constant, which is related to the affinity between quercetin and the surfaces of the inorganic particles. Then, we prepared hybrids formed by fillers saturated with quercetin. The obtained composites were characterized by thermogravimetric analysis with the aim of …
Preparation and characterization of a novel chitosan/Al2O3/magnetite nanoparticles composite adsorbent for kinetic, thermodynamic and isotherm studie…
2015
Abstract In this study we developed a novel chitosan/Al 2 O 3 /magnetic iron oxide nanoparticle composite acting as an adsorbent for removing Methyl Orange (MO), a model anionic dye, from aqueous solution. The new adsorbent was characterized by Scanning Electron Microscope (SEM), Thermo Gravimetric Analysis (TGA), Brunauer–Emmett–Teller (BET) specific surface area, Energy Dispersive spectrometer (EDAX), powder X-ray Diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) methods. The MO removal by the developed adsorbent was investigated using batch adsorption technique and all parameters influencing the removal efficiency such as: dose of adsorbent, pH and initial MO concentr…
Influence of hydrogen cations on kinetics and equilibria of heavy-metal sorption by algae—sorption of copper cations by the alga Palmaria palmata (Li…
2013
The influence of hydrogen cations on kinetics and equilibria of sorption of copper cations by the marine alga Palmaria palmata (Linnaeus) Weber & Mohr was studied under static conditions. The competitive effect of the H+ cations is described, which influenced the uncertainty of evaluation of the alga sorption capacity. Under static conditions, the variation of the Cu2+/H+ concentration ratio during sorption was found nonmonotonic. The Langmuir isotherm model was used to determine the sorption capacity of the alga, namely 12.4 mg g−1 of dry algae mass. A similar value was determined from the kinetic parameters of the ionic exchange which is considered a pseudo-second-order chemical reaction.…
Removal of Pesticide Oxadixyl from an Aqueous Solution
2007
ABSTRACT The mycelium of Phomopsis helianthi (Ascomycete) was hydrolyzed with boiling NaOH to give an insoluble fraction composed of chitosan and glucans. The biomass obtained was tested as an agent for the removal of pesticides from an aqueous solution. Oxadixyl, which has a solubility in water of 3400 mg L−1, has been chosen as a hydrophilic organic contaminant model. The new, cheap material was demonstrated to recover up to 6 mg of oxadixyl per gram of adsorbent. The experimental data show an excellent correlation with the Langmuir isotherm model.
Immobilization of vegetable tannins on tannery chrome shavings and their use for the removal of hexavalent chromium from contaminated water
2011
Abstract Chestnut (C) and mimosa (M) tannins immobilized on chrome shavings (CS) as an adsorbent have been proposed to be an efficient and economical alternative in hexavalent chromium removal from aqueous solutions. The adsorption of hexavalent chromium onto chrome shavings-tannin (CS-T) adsorbents was performed using batch equilibrium technique at 25 ± 2 °C. The effect of pH is highly important especially in the case of high concentrations of hexavalent chromium. The maximum chromium uptake was obtained at pH 4. Two hours of contact time are enough to reach equilibrium. Sorption of chromium on CS-T was found to follow a pseudo-second order kinetic model (with correlation coefficients grea…
Multivalent ion-exchange model of biopolymer chromatography for mass overload conditions
1991
Abstract The simple model of multivalent ion-exchange biopolymer chromatography is analyzed on the basis of classical quasi-chemical temperature. The rigorous isotherm equation deduced from the stoichiometric displacement model (SDM) was used to stimulate the migration of a solute through the chromatographic column in the isocratic and gradient elution modes. The peak profiles generated for various sample sizes were compared with those obtained on the basis of a Langmuir isotherm. Peak tailing increases with the value of the exponent Z, defined as the ratio of the protein valency to the displacing counter-ion valency. For large Z the asymmetries due to the non-linearity of the isotherm are …
Green approach to corrosion inhibition of stainless steel in phosphoric acid of Artemesia herba albamedium using plant extract
2019
Essential oil from aerial parts of Artemisia herba-alba from Morocco was hydrodistilled and its chemical composition oil was investigated by capillary GC and GC/MS. The major components were 1,8-cineole (35.6%) and camphor (24.1%). Artemisia herba-alba essential oil AHAO was tested as corrosion inhibitor of stainless steel (SS) in 1M H3PO4 using potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy measurements (EIS) and scanning electronically microscopy (SEM) studies. The results obtained showed that the essential oil of Artemisia reduces the corrosion rate. Tafel polarization method indicates that the plant extract behaves as a mixed type inhibitor. The inhibition…
Use of peat-based sorbents for removal of arsenic compounds
2013
Abstract It is important to apply sorbent materials for purification of water from arsenic contamination due to serious arsenic pollution worldwide. We have developed new sorbents based on natural materials that provide a cheap and environmentally friendly alternative. For the first time, peat modified with iron compounds and iron humates were tested for sorption of arsenic compounds. The highest sorption capacity was found in peat modified with iron compounds. We have found that sorption of different arsenic speciation forms was strongly dependent on solution pH, reaction time and temperature. Calculations of the sorption process using thermodynamic parameters indicate the spontaneity of s…
The Jäntti approach to adsorption with increasing gas pressure
2002
Jäntti introduced a method of calculating equilibrium adsorption from measurements where the pressure of the gas was varied in a stepwise manner. His aim was to shorten the time necessary for a given measurement. The method was applied to gas/solid systems in which simple adsorption processes occurred and where the number of adsorption sites was infinite. The present paper discusses the case where no adsorption is possible on an already occupied site (Langmuir isotherm) while the number of positions available for adsorption is considered limited. The advantages of using a gas pressure that increases linearly with time are evident for studies with this limitation. It is shown that such meas…
Second harmonic ac polarography of strongly adsorbed electroactive species
1981
Abstract The second harmonic ac current is calculated for the case of a quasi-reversible surface redox system: both species are strongly adsorbed according to a Langmuir isotherm and the kinetics of the process are controlled by the electron transfer. The current is measured with a phase-sensitive detector and the variation of the in-phase and quadrature components vs. the frequency leads to the surface rate constant ks. The experimental results obtained for benzo-(c)cinnoline are in good agreement with the theoretical predictions and with the results of impedance measurements. The advantages of the two methods are compared.