Search results for "specific surface area"
showing 10 items of 123 documents
A Mesoporous 3D Hybrid Material with Dual Functionality for Hg2+Detection and Adsorption
2008
Dual-function hybrid material U1 was designed for simultaneous chromofluorogenic detection and removal of Hg(2+) in an aqueous environment. Mesoporous material UVM-7 (MCM41 type) with homogeneously distributed pores of about 2-3 nm in size, a large specific surface area exceeding 1000 m(2) g(-1), and nanoscale particles was used as an inorganic support. The mesoporous solid is decorated with thiol groups that were treated with squaraine dye III to give a 2,4-bis(4-dialkylaminophenyl)-3-hydroxy-4-alkylsulfanylcyclobut-2-enone (APC) derivative that is covalently anchored to the inorganic silica matrix. The solid was characterised by various techniques including X-ray diffraction, transmission…
Structure of nanoporous carbon materials for supercapacitors
2012
Activated carbons with highly developed porous structure and nanosized pores (8 - 11 A) were prepared from alder wood using thermochemical activation method with sodium hydroxide. Properties of the obtained activated carbons were examined by benzene and nitrogen sorption, X-Ray diffraction and Raman spectroscopy. Tests of activated carbons as electrodes in supercapacitors were performed as well. It was found that specific surface area of above mentioned activated carbons was 1800 m 2 /g (Dubinin - Radushkevich). Raman spectroscopy demonstrated the presence of ordered and disordered structures of graphite origin. The performance of activated carbons as electrodes in supercapacitors have show…
Surface area, density and porosity measurements using the magnetic suspension balance
1989
The advantage of gravimetry in the determination of surface area is discussed in comparison with the volumetric method. The magnetic suspension balance is described and new developments are presented. As an example of the application of gravimetric measurements the determination of apparent density and specific surface area before and after oxidation of a Poco graphite are described.
Ni/Zn Layered Double Hydroxide (LDH) Micro/Nanosystems and Their Azorubine Adsorption Performance
2021
A membranous shaped Ni/Zn layered double hydroxide based nanohybrid was obtained using a low-cost template-free hydrothermal process at optimized growth conditions of 180 °C for 6 h. The synthesized nanohybrid was structurally, texturally and morphologically characterized using different techniques such as X-ray diffraction, FTIR, XPS spectroscopy, BET analysis and FESEM microscopy. The adsorption performance of our product was estimated through the Azorubine dye removal from synthetic wastewater. We therefore studied the synergic effects of Ni/Zn adsorbent dosage, contact time, pH, adsorbate concentration, stirring speed and temperature on the Azorubine adsorption efficiency. In this inves…
Preparation and properties of poly(L-lactic acid) scaffolds by thermally induced phase separation from a ternary polymer-solvent system
2004
Poly(L-lactic acid) (PLLA) foams for tissue engineering were prepared via thermally induced phase separation of a ternary system PLLA/dioxane/tetrahydrofuran (THF) followed by double solvent exchange (water and ethyl alcohol) and drying. An extension to solidification from solution of a previously developed method for solidification from the melt was adopted. The technique is based on a continuous cooling transformation (CCT) approach, consisting in recording the thermal history experienced by rapidly cooled samples and then analyzing the resulting sample morphology. Different foams were produced by changing the relative amount of dioxane and THF in the starting solution while the amount of…
Biomass-based composite catalysts for catalytic wet peroxide oxidation of bisphenol A : preparation and characterization studies
2019
Abstract The wet granulation process was used to prepare new, efficient, and cost-effective granular biomass-based composite catalysts for catalytic wet peroxide oxidation (CWPO) of bisphenol A (BPA). The most stable composite granules was prepared by mixing biomass-based carbon residue (CR) with metakaolin (MK) combined with calcium oxide (CaO) or cement and a solvent (NaOH or KOH). For all the prepared composite granules, the optimized binding agents to carbon ratio was 0.3, the solvent to carbon ratio 1.2, and the agitation rate 1200 rpm. The specific surface area of the prepared catalysts was 152–205 m2/g. The composite granular catalyst (CR + MK + CaO + NaOH) had the most durable and s…
Rapid synthesis of tin (IV) oxide nanoparticles by microwave induced thermohydrolysis
2008
Abstract Tin oxide nanopowders, with an average size of 5 nm, were prepared by microwave flash synthesis. Flash synthesis was performed in aqueous solutions of tin tetrachloride and hydrochloric acid using a microwave autoclave (RAMO system) specially designed by the authors. Energy dispersive X-ray analysis (EDX), X-ray powder diffraction (XRD), Brunauer–Emmett–Teller (BET) surface area analysis, nitrogen adsorption isotherm analysis, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, and transmission electron microscopy (TEM), were used to characterize these nanoparticles. Compared with conventional synthesis, nanopow…
Bentonite-ionic liquid composites for Congo red removal from aqueous solutions
2021
Abstract Clay-organic composites have attracted great interest due to their ability to remove various contaminants from wastewater. The surfactants are the most commonly used organic compounds for clay modification. However, cationic surfactants are toxic and can be environmentally hazardous. Ionic liquids are a new promising alternative to the cationic surfactants due to lesser toxicity and appropriate thermal stability. The research aim is to prepare an environmentally friendly new class of clay sorbents modified with ionic liquids for potential applications in wastewater treatment from the textile industry. Imidazolium-based ionic liquids with different lengths of alkyl chains were inter…
Structure and performance properties of environmentally-friendly biocomposites based on poly(ɛ-caprolactone) modified with copper slag and shale dril…
2018
The potential application of two types of industrial wastes, drill cuttings (DC) and copper slag (CS), as silica-rich modifiers of poly(ɛ-caprolactone) (PCL) was investigated. Chemical structure and physical properties of DC and CS fillers were characterized using X-ray diffractometer, X-ray fluorescence spectroscopy, particle size and density measurements. PCL/DC and PCL/CS composites with a variable content of filler (5 to 50 parts by weight) were prepared by melt compounding in an internal mixer. It was observed that lower particle size of DC filler enhanced processing of biocomposites comparing to CS filler. Smaller particles of DC filler and thus the higher specific surface area, enabl…
Preparation and characterization of a novel chitosan/Al2O3/magnetite nanoparticles composite adsorbent for kinetic, thermodynamic and isotherm studie…
2015
Abstract In this study we developed a novel chitosan/Al 2 O 3 /magnetic iron oxide nanoparticle composite acting as an adsorbent for removing Methyl Orange (MO), a model anionic dye, from aqueous solution. The new adsorbent was characterized by Scanning Electron Microscope (SEM), Thermo Gravimetric Analysis (TGA), Brunauer–Emmett–Teller (BET) specific surface area, Energy Dispersive spectrometer (EDAX), powder X-ray Diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) methods. The MO removal by the developed adsorbent was investigated using batch adsorption technique and all parameters influencing the removal efficiency such as: dose of adsorbent, pH and initial MO concentr…