Search results for "specific surface area"
showing 10 items of 123 documents
Photocatalytic conversion of glucose in aqueous suspensions of heteropolyacid-TiO2 composites.
2015
Commercial and home prepared TiO2 samples were functionalized with a commercial Keggin heteropolyacid (HPA) H 3PW12O 40 (PW12) or with a hydrothermally home prepared K 7PW11O 39 salt (PW11). All the materials were characterized by specific surface area measurements (BET), XRD analyses, Raman, DRS along with SEM observations and they have been used for glucose photocatalytic conversion in an aqueous suspension. Different reaction extents and distribution of intermediate oxidation products were observed depending on the photocatalyst. Gluconic acid, arabinose, erythrose and formic acid were observed as oxidation products when bare TiO2 or HPA/TiO2 composite materials were used. Glucose isomer…
Tailored syntheses of nanostructured silicas: Control of particle morphology, particle size and pore size
1998
Ordered mesoporous silicas with spherical morphology and average particle size in the range between 100 nm and 2 μm were synthesised according to two novel routes. Both synthesis routes used tetraethoxysilane, water, alcohol and aqueous ammonia for producing spherical silica beads. The porosity was created by adding two different kinds of pore structure directing agents to the starting solution: one was an n-alkyltrialkoxysilane which was covalently bonded to the silica framework, the other was an n-alkylamine which acted as a nonionic template. After calcination and post treatment the resulting particles showed a specific surface area up to 1000 m2 g-1, a specific pore volume of up to 0.8 …
Multi-doped Brookite-Prevalent TiO2 Photocatalyst with Enhanced Activity in the Visible Light
2018
© 2018 Springer Science+Business Media, LLC, part of Springer Nature Abstract: Enabling solar and/or visible light-driven photocatalysis is a crucial step to access innovative applications in environmental science and sustainable energy. Titanium dioxide is the most used photocatalyst because of its low cost and toxicity, however it is also limitedly active under visible light irradiation due to its wide band gap. Among its polymorphs, brookite holds promising optoelectronic properties for visible light photocatalysis, which have to the best of our knowledge been limitedly exploited. Here, a C,S,N-doped brookite-based TiO2has been prepared via a rapid one-pot sol–gel synthesis. Besides subs…
Formulation of Mesoporous Silica Nanoparticles for Controlled Release of Antimicrobials for Stone Preventive Conservation
2020
The biotic deterioration of artifacts of archaeological and artistic interest mostly relies on the action of microorganisms capable of thriving under the most disparate environmental conditions. Thus, to attenuate biodeterioration phenomena, biocides can be used by the restorers to prevent or slow down the microbial growth. However, several factors such as biocide half-life, its wash-out because of environmental conditions, and its limited time of action make necessary its application repeatedly, leading to negative economic implications. Sound and successful treatments are represented by controlled release systems (CRSs) based on porous materials. Here, we report on the design and developm…
Importance of the liquid to solid weight ratio in the powdered solid-liquid reactions Example drawn from cement constituent hydration
1997
Abstract It seems justified to wonder if the chemical processes which have been evidenced from diluted stirred suspensions are or are not in accordance with those involved in a stagnant paste. The present paper is aimed at clarifying this question which is in connection with the problem of the so called ‘dormant period’ or ‘induction period’ at the beginning of the hydration of Portland cement.
Effect of superplasticizers on the rheological properties of fly ash suspensions containing activators of the pozzolanic reaction
2000
Rheological studies have been carried out on the effect of a superplasticizer from the sulphonated melamine formaldehyde (SMF) group upon the properties of fly ash suspensions containing a small quantity of mineral admixtures such as cement, lime and gypsum. The superplasticizers' efficiency has appeared to depend greatly on the admixture used. The highest liquefaction degree was found in fly ash suspensions containing both cement and gypsum together and the next it was, when only cement was added. These suspensions exhibit features of a newtonian fluid of low plastic viscosity, when the water to solid ratio (w/s) is 0.3 and a superplasticizer has been used. However, fly ash suspensions wit…
Physicochemical parameters - hydration performance relationship of the new endodontic cement MTA Repair HP
2019
Background To characterize the chemical composition and textural parameters of the MTA Repair HP precursor powder and their influence to hydration performance. Material and methods Un-hydrated precursor material was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray fluorescence (XRF), laser diffraction (LD), N2 physisorption and field emission gun scanning electron microscopy (FEG-SEM). Setting time was assessed according to ASTM specification C 266. Hydrated material was analysed by XRD, FT-IR, energy dispersive X-ray (EDX) analysis and FEG-SEM. Results Ca3SiO5 and Ca2SiO4, in addition to CaWO4 as radiopacifier are the main compositional phase…
Modification of the rate of formation and surface area of ettringite by polycarboxylate ether superplasticizers during early C3A–CaSO4 hydration
2015
Abstract Early C3A–CaSO4 hydration was studied in the presence of various amounts of two polycarboxylate ether superplasticizers differing in their grafting degree. Hydration and surface area developments were investigated by in-situ NMR relaxometry coupled with BET and DSC during the first 2 h after mixing. This study enables a quantitative comparison of the amount and the specific surface area of the ettringite precipitated along the C3A–CaSO4 hydration with or without PCE. The main effect of PCE is to strongly increase ettringite specific area for a variable period. These effects are clearly dependent on the PCE charge and dosage and are reduced when using delayed addition. In this conte…
Influence of barium and cerium oxides on alumina supported Pd catalysts for hydrocarbon combustion
2002
Abstract The effects of baria and ceria additions to alumina-supported palladium catalysts have been investigated. Two series of binary Al 2 O 3 –BaO and ternary oxides Al 2 O 3 –CeO 2 –BaO were prepared using a sol–gel method and then characterized, after high-temperature treatments, by XRD, BET, TG, TEM and EDXS analyses. The influence of baria and ceria on the thermal stability and morphology of the supports was examined. A baria content of 12 wt.% appears the most effective for alumina stabilization. Palladium catalysts were prepared by impregnation method using Pd(NH 3 ) 4 (NO 3 ) 2 and were characterized by XRD and TEM. The catalysts showed high activity in the total oxidation of meth…
Photocatalytic degradation of 4-Nitrophenol by g-C3N4-MCy: Mechanism study and kinetic modeling
2021
Abstract A graphitic carbon nitride (g-C3N4-MCy) photocatalyst was prepared by thermal condensation of melamine and cyanuric acid with equal proportions. The photocatalyst was characterized by Fourier transform infrared spectroscopy (FTIR), Specific surface area (SSA), X-ray diffraction (XRD), Field Emission Scanning Electron Microscope (FESEM), Transmission electron microscope (TEM), and DRS–UV–Vis spectroscopic methods. We studied the photo-degradation kinetics of 4-nitrophenol using a g-C3N4-MCy. Four parameters were applied including initial concentration of 4-nitrophenol, amount of catalyst, dissolved oxygen content, and photon flux. The reaction rate constant was shown to be correlate…