Search results for "specific surface area"
showing 10 items of 123 documents
Selective hydrogenation of nitroderivatives over Au/TiO2/UVM-7 composite catalyst
2020
Abstract Hydrogenation of nitroderivatives (4-nitrostyrene or 7-nitro-1-tetralone) was performed using as support a silica mesoporous material with high specific surface area (1091 m2/g) and a bimodal pore size distribution (UVM-7). Gold and/or TiO2 were deposited inside the pores of this support with the aim to achieve high activity and selectivity for this reaction. The morphology and structure of the powders have been characterized by adsorption-desorption isotherms, XRD, TEM, STEM-HAADF, XPS and ATR-FTIR. Structural characterizations shown differences between the catalysts with and without titania. The presence of TiO2 provides a better size distribution of the spherical gold nanopartic…
N-TiO2 Photocatalysts highly active under visible irradiation for NOX abatement and 2-propanol oxidation
2013
N-doped TiO2 powders were prepared by two different sol-gel methods. Samples were characterised by X-ray diffraction (XRD), BET specific surface area measurements (SSA), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) and Electron Paramagnetic Resonance (EPR). XPS measurements revealed a signal at 400 eV assignable to nitrogen in the form of Ti-N-O. EPR signals are attributed to molecular NO trapped with cavities/defects possibly interacting with oxygen vacancies. The photocatalytic activity under UV and visible light was determined following the abatement of NOx and the photodegradation of 2-propanol in gas-solid systems. N…
Preparation of palladated porous nitrogen-doped carbon using halloysite as porogen: disclosing its utility as a hydrogenation catalyst
2020
AbstractIn this article, halloysite nanoclay (Hal) was used as porogen for the synthesis of nitrogen doped porous carbon material with high specific surface area and pore volume. To this purpose, polymerization of melamine and terephthalaldehyde (MT) was performed in the presence of amine-functionalized carbon coated Hal (Hal@Glu-2N) that was prepared from hydrothermal treatment of Hal and glucose. Then, the prepared nanocomposite was palladated and carbonized to afford Pd@Hal@C. To further improve the textural properties of the nanocomposite, and introduce more pores in its structure, Hal nanotubes were etched. The characterization of the resulting compound, Pd@C, and comparing it with Pd@…
Preparation of magnetic composites of MIL-53(Fe) or MIL-100(Fe) via partial transformation of their framework into γ-Fe2O3
2016
A novel two-step approach is proposed to obtain magnetically active composite materials consisting of MIL-53(Fe) or MIL-100(Fe) and γ-Fe2O3 particles. The first step consists in a partial transformation of the framework into a layer of γ-FeO(OH) (lepidocrocite) covering the MOF particles. We found that such a transformation can be realized under air-free conditions by hydrolysing the MOFs at pH 6.2 in the presence of FeSO4. In the second step the obtained γ-FeO(OH)/MOF composite is heated under an air flow at 250 °C in order to transform γ-FeO(OH) to γ-Fe2O3. The thus prepared composites containing 40 wt% of the magnetic phase were characterized in detail by XRD, HRTEM, FESEM, N2 adsorption…
Nanoconfined mixed Li and Mg borohydrides as materials for solid state hydrogen storage
2012
Abstract Several mixtures of LiBH4 and Mg(BH4)2 borohydrides in different stoichiometric ratios (1:0, 2:1, 1:1, 1:2, 0:1), prepared by high energy ball milling, have been investigated with X-ray powder diffraction and thermal programmed desorption (TPD) volumetric analysis to test the dehydrogenation kinetics in correlation with the physical mixture composition. Afterwards mixed and unmixed borohydrides were dispersed on high specific surface area ball milled graphite by means of the solvent infiltration technique. BET and statistical thickness methods were used to characterize the support surface properties, and SEM micrographs gave a better understanding of the preparation techniques. It …
Structure of natural water-containing glasses from Lipari (Italy) and Eastern Rhodopes (Bulgaria): SAXS, WAXS and IR studies
1998
Abstract Two natural water-containing glasses with rhyolite composition originating from two different areas (perlite from Lipari, Italy, and expanded perlite from the Eastern Rhodopes, Bulgaria) have been characterised for chemical composition, atomic structure and specific surface area, with the ultimate goal of exploitation of volcanic glasses as carriers for heterogeneous metal catalysts. The two samples have similar chemical composition and total water content. The local structure, as determined by radial distribution function analysis of the wide angle X-ray scattering patterns, is similar, the medium-range structure being slightly more ordered for the Lipari glass. These results are …
Dense Mosi2 produced by reactive flash sintering: Control of Mo/Si agglomerates prepared by high-energy ball milling
2011
The objective of this work is to determine the influence of the agglomeration state of the MA mixture on the microstructure and the chemical composition of SPS end-products. In order to produce MoSi2 with a microstructure and a density perfectly controlled via reactive sintering implying an SHS reaction, the characteristics of Mo/Si mechanically activated (MA) powder mixtures were investigated. Indeed, the MA powders have been characterized in terms of their surface specific area, size, phase composition and microstructure. The high-energy milling allows the formation of agglomerates (0.8 to 800 μm) composed of nanometric crystallites of molybdenum and silicon, as a consequence of a continu…
Low temperature synthesis of monodisperse nanoscaled ZrO2with a large specific surface area
2012
Thermal decomposition of Zr(C(2)O(4))(2)·4H(2)O within an autoclave or in a conventional tube furnace at temperatures below 380 °C resulted in nano- and micron-sized ZrO(2), respectively. Reactions under autogenic pressure yielded monodisperse monoclinic (m) and tetragonal (t) ZrO(2) nanoparticles with an average diameter of ~8 nm and interconnected t-ZrO(2) nanoparticles with diameters of ~4 nm, depending on the synthesis temperature. Samples were characterised by X-ray diffraction (XRD), small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) associated with energy dispersive X-ray spectroscopy (EDS), Raman microspectroscopy and phot…
Characterization and photoactivity of coupled ZnO-ZnWO4 catalysts prepared by a sol-gel method
2014
Abstract ZnO–ZnWO4 nanocomposites were synthesized by a novel sol–gel method and characterized through X-ray diffraction, BET specific surface area analysis, UV–Vis diffuse reflectance spectroscopy, scanning electron microscopy and transmission electron microscopy. The photocatalytic activity of the samples was evaluated using the degradation of 4-nitrophenol under UV light as probe reaction. The ZnO/ZnWO4 molar ratio was varied in order to study its influence on the photoefficiency of the mixed samples. The ZnO–ZnWO4 nanocomposites showed higher photoactivity than ZnO and ZnWO4. The high efficiency of the mixed samples was explained by the coupling and the intimate contact of two different…
Preparation and characterization of activated carbon from date stones by physical activation with steam
2008
Abstract Activated carbons are produced from wastes of Algerian date stones by pyrolysis and physical activation in the presence of water vapor into a heated fixed-bed reactor. The effect of pyrolysis temperature and activation hold time on textural and chemical surface properties of raw date stones and carbon materials produced are studied. As expected, the percentage yield decreases with increase of activation temperature and hold time. The characterization of carbon materials is performed by scanning electron microscopy (SEM). X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and nitrogen adsorption (BET). Results show the presence of cellulose and hemicellulose in …