Search results for "steady state"
showing 10 items of 173 documents
New time-dependent Monte Carlo algorithm designed to model three-phase batch reactor processes: applications on 2,4-dinitro-toluene hydrogenation on …
2003
Abstract The hydrogenation of 2,4-dinitro-toluene on a Pd/C catalyst was employed as a test reaction to simulate, by the time-dependent Monte Carlo method, processes occurring in a three-phase batch reactor working at isobar and isotherm conditions. A new time-dependent Monte Carlo algorithm, including an original subroutine useful to reduce the time of the simulations, was developed and implemented in Fortran language. The paper describes the flowchart of the code together with the main technical details and the involved physical and chemical models. Computational characteristics, such as the simulated time to reach surface steady state conditions and the effects of the catalyst morphology…
Steady state and transient thermal-hydraulic characterization of full-scale ITER divertor plasma facing components
2008
Abstract In the frame of the activities related to ITER divertor R&D, ENEA CR Brasimone was in charge by EFDA (European Fusion Development Agreement) to investigate the thermal-hydraulic behaviour of the full-scale divertor plasma facing components, i.e. the outer vertical target, the inner vertical target and the dome-liner, both in steady state and during draining and drying transient. The investigation was performed by means of both experimental test campaigns performed at ENEA CR Brasimone and theoretical simulation developed in RELAP5 Mod.3.3 environment at the Department of Nuclear Engineering of the University of Palermo (DIN). This paper presents the achieved experimental results fo…
On the theoretical–numerical study of the ITER Upper Port Plug structure hydraulic behaviour under steady state and draining and drying transient con…
2011
Abstract The ITER diagnostic Upper Port Plug (UPP) is a water-cooled stainless steel structure aimed to integrate within vacuum vessel the plasma diagnostic systems, shielding them from neutron and photon irradiation. Due to the very intense heat loads expected, a proper cooling circuit has been designed to ensure an adequate UPP cooling with an acceptable thermal rise and an unduly high pumping power and to perform its draining and drying procedure by injection of pressurized nitrogen. A theoretical research activity has been launched at the Department of Nuclear Engineering of the University of Palermo aiming to investigate the hydraulic behaviour of the UPP Trapezoid Section cooling circ…
Unravelling steady-state bulk recombination dynamics in thick efficient vacuum-deposited perovskite solar cells by transient methods
2019
Accurately identifying and understanding the dominant charge carrier recombination mechanism in perovskite solar cells are of crucial importance for further improvements of this already promising photovoltaic technology. Both optical and electrical transient methods have previously been employed to strive for this warranted goal. However, electrical techniques can be strongly influenced by the capacitive response of the device which hides the carrier recombination dynamics that are relevant under steady state conditions. To ascertain the identification of steady state relevant charge carrier dynamics, it is beneficial to evaluate thicker films to minimize the impact of device capacitance. H…
Peltier cells as temperature control elements: Experimental characterization and modeling
2014
Abstract The use of Peltier cells to realize compact and precise temperature controlled devices is under continuous extension in recent years. In order to support the design of temperature control systems, a simplified modeling of heat transfer dynamics for thermoelectric devices is presented. By following a macroscopic approach, the heat flux removed at the cold side of Peltier cell can be expressed as Q ˙ c = γ ( T c − T c eq ) , where γ is a coefficient dependent on the electric current, Tc and T c eq are the actual and steady state cold side temperature, respectively. On the other hand, a microscopic modeling approach was pursued via finite element analysis software packages. To validat…
Multi-Module vs. Single-Module concept: Comparison of thermomechanical performances for the DEMO Water-Cooled Lithium Lead breeding blanket
2018
Abstract Within the framework of EUROfusion R&D activity an intense research campaign has been performed at the University of Palermo, in close cooperation with ENEA labs and KIT, in order to compare the thermomechanical performances of the Back Supporting Structure (BSS) of Multi-Module and Single-Module concepts of DEMO Water-Cooled Lithium Lead breeding blanket (WCLL). To this purpose, detailed 3D models of the DEMO WCLL right inboard and central outboard segments, including detailed BSS and simplified First Wall and structures according to the two concepts, have been set-up. The study has been performed considering the Normal Operation and Central Major Disruption steady state loading s…
Solution to nonlinear MHDS arising from optimal growth problems
2011
Abstract In this paper we propose a method for solving in closed form a general class of nonlinear modified Hamiltonian dynamic systems (MHDS). This method is used to analyze the intertemporal optimization problem from endogenous growth theory, especially the cases with two controls and one state variable. We use the exact solutions to study both uniqueness and indeterminacy of the optimal path when the dynamic system has not a well-defined isolated steady state. With this approach we avoid the linearization process, as well as the reduction of dimension technique usually applied when the dynamic system offers a continuum of steady states or no steady state at all.
On the evaluation of the global heat transfer coefficient in cutting
2007
The use of numerical simulations for investigating machining processes is remarkably increasing because of the simulation cost is lower than the experiments and the possibility to analyze local variables such as pressures, strains, and temperatures is allowable. Process simulation is very hard from a computational point of view, since it frequently requires remeshing phases and very small time steps. As a consequence, the simulated cutting time is usually of the order of few milliseconds and no steady cutting conditions are generally achieved, at least as far as thermal conditions are concerned. Therefore, nowadays numerical prediction of cutting temperatures cannot be considered fully reli…
Influence of the initial sludge characteristics and acclimation on the longterm performance of double-compartment acetate-fed microbial fuel cells
2018
Abstract In this work, three double-compartment MFCs (DC-MFC) were operated for 1 month in order to compare their performances in terms of wastewater treatment capacity and electricity production and to get information about how this performance is influenced by the start-up procedure. To do this, they underwent different start-up procedures. One of them (aerobic-starved MFC) was inoculated with 100% fresh aerobic sludge, another (anaerobic-starved MFC) using 100% fresh anaerobic sludge, and finally a third one (aerobic-fed MFC) was inoculated using a mixture 10% fresh aerobic sludge and 90% synthetic wastewater (based on acetate). Then, from this start-up, the cells were operated exactly u…
Modeling of Growth and Dissolution of Nanotubular Titania in Fluoride-Containing Electrolytes
2009
In this paper, model calculations of diffusion processes and pH profiles inside TiO 2 nanotubes are performed in order to explore key factors in the growth mechanism of this system in aqueous electrolytes. An electrochemical steady state featured by an equivalent rate between oxide growth and dissolution is reached for a given current efficiency. Electrochemical oxide growth is found to be exclusively located at the pore bottom, whereas chemical oxide dissolution is uniformly distributed over the whole nanotube. It can be deduced from the results that electrolyte resistance or diffusion processes in the electrolyte inside the tubes are not limiting.