Search results for "strength"

Effect of the additive level and of the processing temperature on the re-building of post consumer pipes from polyethylene blends

2007

Abstract One of the main shortcomings of the mechanical recycling is that the properties of the secondary materials are generally sensibly inferior with respect to the virgin ones. This feature implies, for sure, that they cannot be used for the same technological application but also other uses of the secondary material are impossible. The aim of this work is to study the re-building of recycled post-consumer pipes, made of a blend of different polyethylenes, by re-processing in the presence of a nitroxyl compound as radical generator. The processing temperature and the additive concentration have been varied in order to study the effect of these parameters on the final properties. The mec…

Physical properties of virgin-recycled ABS blends: Effect of post-consumer content and of reprocessing cycles

2012

Abstract Virgin/post-consumer ABS (pc-ABS) blends were re-processed and re-formed up to three times. The effect of pc-ABS content and of reprocessing cycles on the physical properties of the prepared blends was evaluated by mechanical tests (tensile, flexural and impact tests) and by rheological and thermo-mechanical measurements. The processability of pc-ABS blends was not substantially different by that of virgin ABS up to two recycling steps even if the third one induced a slightly decrease of viscosity, more remarkable on increasing the pc-ABS content. The mechanical and thermo-mechanical properties of the samples worsened on increasing the level of pc-ABS and after each reprocessing op…

Investigation on the Properties and on the Photo-Oxidation Behaviour of Polypropylene/Fumed Silica Nanocomposites

2021

This work investigates the effects of very small amounts of fumed silica on the morphology and on the rheological and mechanical behaviour of polypropylene nanocomposites and on their photo-oxidation behaviour. Polypropylene nanocomposites were prepared using a twin-screw corotating extruder with 0, 1 and 2 wt/wt% of SiO2. Morphological, mechanical, thermomechanical and rheological properties were examined. It was found that the viscosity of the matrix is reduced by the presence of the silica nanoparticles, suggesting a poor adhesion between the two phases and probably some lubricating effect. On the contrary, the mechanical and, in particular, the thermomechanical properties of the matrix …

Effect of Moisture Content on the Processing and Mechanical Properties of a Biodegradable Polyester

2021

This work is focused on the influence of moisture content on the processing and mechanical properties of a biodegradable polyester used for applications in injection molding. The pellets of the biodegradable polyester were exposed under different relative humidity conditions at a constant temperature before being compression molded. The compression-molded specimens were again placed under the above conditions before the mechanical testing. With all these samples, it is possible to determine the effect of moisture content on the processing and mechanical properties separately, as well as the combined effect of moisture content on the mechanical properties. The results obtained showed that th…

Recycled Polycarbonate Blend as Matrix for Development of Polymer Nanocomposite

2012

Summary: Secondary polycarbonate (SPC) is modified with various amounts (5, 10, 30 wt%) of ethylene vinyl acetate copolymer (EVAc) in order to reduce its brittleness. It is observed that at optimal EVAc weight content maximum tensile strength σM and impact strength AI increse by 14% (ωEVAc = 5 wt%) and 450% (ωEVAc = 10 wt%) in comparison to neat SPC, respectively. Addition of montmorillonite nanoclay (MMT) allowed further increase of elastic modulus E, strength and creep resistance of the investigated SPC blend with 10 wt% of EVAc.

Origin of nanostructural inhomogeneity in polymer-network gels

2017

Polymer-network gels often display nano- to microstructural spatial inhomogeneity of their polymer-segmental and crosslinking densities, especially if they are formed by uncontrolled free-radical crosslinking copolymerization of mono- and multifunctional monomers and crosslinkers. This structural complexity markedly affects their optical clarity, mechanical strength, and permeability, which is of central relevance for their performance in everyday-life and high-tech products. This review summarizes and inter-relates a rich amount of existing studies on the origin of this inhomogeneity. It arcs from early fundamental work in the 1990s, development and assessment of highly ideal and super tou…

Aging of Nanosized ZnO Modified Polyoxymethylene Blends with Ethylene–octene Copolymer

2015

The influence of ethylene–octene copolymer and zinc oxide (ZnO) on structure and tensile stress–strain behavior of polyoxymethylene were investigated before and after ultraviolet weathering. Addition of ZnO considerably improved stress–strain characteristics of the ultraviolet-irradiation impaired composites. Crystallinities of ultraviolet-irradiated composites were affected by numerous competitive processes, including suppression of crystallization in the presence of multiple components in the system, nucleation induced by nanofiller, secondary crystallization and amorphization because of the chain scissions of the macromolecules. Addition of ZnO considerably improved stability of the comp…

An Innovative Treatment Based on Sodium Citrate for Improving the Mechanical Performances of Flax Fiber Reinforced Composites

2021

The goal of this paper is to evaluate the effectiveness of a cost-effective and eco-friendly treatment based on the use of sodium citrate (Na3C6H5O7) on the mechanical properties of flax fiber reinforced composites. To this scope, flax fibers were soaked in mildly alkaline solutions of the sodium salt at different weight concentration (i.e., 5%, 10% and 20%) for 120 h at 25 °C. The modifications on fibers surface induced by the proposed treatment were evaluated through Fourier transform infrared analysis (FTIR), whereas scanning electron microscope (SEM) and helium pycnometer were used to obtain useful information about composites morphology. The effect of the concentration of the treating …

2019

In this study, the structural behavior of small-scale wood beams externally strengthened with various fiber strengthened polymer (FRP) composites (i.e., flax FRP (FFRP), basalt FRP (BFRP), E-glass FRP (“E” stands for electrical resistance, GFRP) and their hybrid FRP composites (HFRP) with different fiber configurations) were investigated. FRP strengthened wood specimens were tested under bending and the effects of different fiber materials, thicknesses and the layer arrangements of the FRP on the flexural behavior of strengthened wood beams were discussed. The beams strengthened with flax FRP showed a higher flexural loading capacity in comparison to the beams with basalt FRP. Flax FRP prov…

Mechanical properties of rigid polyurethane foams at room and cryogenic temperatures

2011

Studies on the effect of the foams’ polymeric matrix’ properties on the tension and compression properties of pour rigid polyurethane (PUR) foams, apparent core density 65—70 kg/m3, at 296 and 77 K were carried out. PUR foams were produced by the hand mixing method from polyol systems that comprised polyether, polyester polyols, and chain extenders. To produce PUR foams, crude MDI was used, and Solkane 365 mfc/227 ea was used as a blowing agent. The molecular weight per branching unit (Mc) of the polymeric matrix of PUR foams was varied in the range 300—1150. Cohesion energy densities of the blocks forming the polymeric matrix were calculated. The effect of Mc on the formation of hydrogen …