Search results for "strength"
showing 10 items of 2415 documents
First gas and thermal measurements at the frequently erupting Gamalama volcano (Indonesia) reveal a hydrothermally dominated magmatic system
2020
Abstract The first gas and thermal measurements at the summit of the Gamalama volcano indicate that the system is dominated by hydrothermal processes. This is highlighted by the prevalence of H2S over SO2 (H2S/SO2 = 2–8), a high CO2/SO2 ratio (76–201), and a low heat transfer (3.0 MW) to the surface. A relative variation in gas composition is observed along the degassing fracture zone, possibly due to partial S scrubbing. Despite this surface hydrothermal signature, the system exhibits high gas equilibrium temperatures (425–480 °C), indicating that fluids are not exclusively derived from a boiling hydrothermal aquifer, but also sourced by cooling and crystallizing basaltic magma at deep tha…
DNA condensation with spermine dendrimers: interactions in solution, charge inversion, and morphology control
2011
In this report, we characterize the formation of structured condensates of 884 base pair, double stranded DNA and spin-labeled, second generation dendrons (SL-G2) that are spermine-based and cationic using continuous wave electron paramagnetic resonance spectroscopy (CW EPR) and transmission electron microscopy (TEM). The electrostatic interaction between DNA and SL-G2 in solution leads to condensation of DNA into densely packed structures. At a particular charge ratio of 2.3 (cationic charges/anionic charges), the structures appear as thick rod-like condensates of parallelly ordered, stretched DNA and SL-G2. Depending on the concentration of DNA, the charge ratio and the ionic strength, wh…
Stiffness and strength of composite truss beam to R.C. column connection in MRFs
2015
Abstract The results of experimental and numerical investigations on the cyclic behavior of composite truss beam to reinforced concrete column connection of moment resisting frames are reported. The beams are constituted by a steel truss and end zone added rebar embedded within a concrete block cast in place, so that, after curing, the steel truss and the added rebar work together with the concrete matrix as reinforcement of the composite beam. Particularly, three specimens of two-span continuous beams were tested under monotonic and cyclic actions as three point bending test. With the goal to investigate about the behavior of the end zone of the beam integrated into a moment resisting fram…
Performance of Steel Fibrous Reinforced Concrete Corbels Subjected to Vertical and Horizontal Loads
2009
A softened strut-and-tie macromodel able to reproduce the flexural behavior of corbels in plain and fibrous concrete and with the presence of steel bars, including softening of compressed struts and yielding of main and secondary steel bars, is presented in this paper. The main focus of the proposed model is the determination of the load-deflection curves of corbels subjected to the coupled effects of vertical and horizontal forces bearing in mind the influence of the type of concrete (normal or high strength), of the fiber percentage and of the arrangement and percentage of the main and secondary (horizontal stirrup) steel bars. A validation of the proposed model is made therefore with ref…
The use of steel angles for the connection of laminated glass beams: Experiments and modelling
2012
Abstract In the present paper the experimental results relative to three-point bending tests on multilayer glass beams and on semi-rigid connections realised with stainless double web angles are presented and discussed. Small and medium size glass beams were tested and load–deflection curves and crack patterns at failure were recorded. The laminated glass specimens, of equal cross-section, were characterised by three different combinations of annealed float and fully thermally tempered glass plies and different interlayers. Steel joints constituted by double web angles to connect two glass beams were tested adopting several geometrical configurations and using stainless steel bolts preloade…
Influence of a thin horizontal weak layer on the mechanical behaviour of shallow foundations resting on sand
2021
The presence of minor details of the ground, including soil or rock masses, occurs more frequently than what is normally believed. Thin weak layers, shear bands, and slickensided surfaces can substantially affect the behaviour of foundations, as well as that of other geostructures. In fact, they can affect the failure mechanisms, the ultimate bearing capacity of footings, and the safety factor of the geotechnical system. In this research, numerically conducted through Finite Element Code Plaxis 2D, the influence of a horizontal thin weak layer on the mechanical behaviour of shallow footings was evaluated. The obtained results prove that the weak layer strongly influences both the failure me…
PLA graphene nanoplatelets nanocomposites: Physical properties and release kinetics of an antimicrobial agent
2017
Abstract Graphene nanoplatelets (GnP) as filler and ciprofloxacin (CFX) as biocide were incorporated via melt-compounding into poly(lactic acid) (PLA) to obtain biopolymer-based nanocomposites with antimicrobial properties. GnP were added with the aim of improving the mechanical properties of the antimicrobial system and tuning the drug release. The obtained systems were mechanically characterized in tensile mode by quasi-static and dynamic mechanical tests. Furthermore, rheological measurements were performed. The morphology of the samples was analyzed through scanning electron microscopy (SEM). Moreover, a mathematical model, i.e. power law model, was used to fit the release data in order…
Towards the development of a fossil bone geochemical standard: An inter-laboratory study
2007
Ten international laboratories participated in an inter-laboratory comparison of a fossil bone composite with the objective of producing a matrix and structure-matched reference material for studies of the bio-mineralization of ancient fossil bone. We report the major and trace element compositions of the fossil bone composite, using in-situ method as well as various wet chemical digestion techniques. For major element concentrations, the intra-laboratory analytical precision (%RSDr) ranges from 7 to 18%, with higher percentages for Ti and K. The %RSDr are smaller than the inter-laboratory analytical precision (%RSDR; 100% was found for the high field strength elements (Hf, Th, Zr, Nb). The…
Interfacial shear strength of flax fibers in thermoset resins evaluated via tensile tests of UD composites
2012
Abstract A method of interfacial shear strength evaluation, based on the length distribution of fibers pulled out from the tensile fracture surface of an oriented flax-reinforced composite, is applied to composites with vinyl ester and acrylated epoxidized soy oil resin matrices. Two approaches for characterizing the strength of fibers with modified Weibull distribution, fiber fragmentation tests and fiber tension tests, are compared in the analysis of pull-out data. Interfacial shear strength is found to increase by a few percent when loading rate is increased from 1.33% to 8%/min.
Effects of halloysite content on the thermo-mechanical performances of composite bioplastics
2020
Abstract The aim of this study is the design and preparation of Mater-Bi/halloysite nanocomposite materials that could be employed as bioplastics alternative to the petroleum derived products. The biocomposite materials at variable halloysite content (from 0 to 30 wt%) were prepared by using the solvent casting method. We investigated the mechanical behaviour and the thermal properties of the prepared nanocomposites in order to estimate their suitability as biocompatible packaging materials. The thermo-mechanical characteristics were correlated to the nanocomposites' morphologies, which were studied by Scanning Electron Microscopy (SEM). As a general result, the physico-chemical performance…