Search results for "strength"
showing 10 items of 2415 documents
Mechanical properties and microstructural study of homogeneous and heterogeneous laser welds in α, β,and α + β titanium alloys
2018
International audience; Heterogeneous welding has been investigated for three different couples of titanium alloys: α/α + β, α/β,andα + β/β. Plates of 100 × 60 mm and 1.6 or 1.8 mm thick were welded with a Yb:YAG laser. Tensile tests show that the resistance of the heterogeneous welded specimens was generally controlled by those of the weakest material except for the α + β/β where the ultimate tensile strength was approximately equal to the average value of both materials. In every case, the elongation of the welded sample was found to be smaller than that of the base metals. The rupture generally took place outside the weld metal and was found to be most of the time located in the alloy ha…
Impact of hip abductor and adductor strength on dynamic balance and ankle biomechanics in young elite female Basketball players
2022
This study aimed to evaluate, in an isolated and relative manner, hip abductor (ABD) and adductor (AD) strength and to study the extent to which these factors are related to balance and ankle dorsiflexion mobility in young elite female basketball players. Sixty trainee-level elite female basketball players (13–18 years old), who voluntarily agreed to participate in the study, were divided into three subgroups based on competition age divisions (U14, U16, U18). Isometric hip ABD and AD strength in each leg was evaluated using the ForceFrame Strength Testing System, also calculating the strength ratio and imbalance between legs. Y Balance Test (YBT) and ankle dorsiflexion mobility were also a…
Evaluation of Mechanical and Structure Properties of Electron Beam Cross-Linked Ethylene-Octene Copolymer Nanocomposites with Multi-Walled Carbon Nan…
2016
Recently, ionizing radiation has found an application in nanotechnology especially attributed to the improvement of nanocomposites. In the present paper, we have developed and evaluated radiation cross-linked nanocomposites made of ethylene-octene copolymer (EOC) with 0-15 wt.% of multi-walled carbon nanotubes (MWCNTs) and irradiated by 5 MeV accelerated electrons. The influence of combined factors of MWCNT filler content and the irradiation up to 150 kGy on the tensile stress-strain properties at 25–50°C was analysed. The cross-linking efficiency was also evaluated. The results indicated improvement in tensile properties with an increase of MWCNT content and the irradiation up to 150 kGy d…
Inner-shell excitation spectroscopy of closo-carboranes
1997
Oscillator strength spectra in the region of B 1s and C 1s excitation of three isomeric carborane cage compounds [closo-1,2-orthocarborane, closo-1,7-metacarborane, closo-1,12-paracarborane (C2B10H...
Do non-responders to resistance training exist in professional sport?
2020
Resistance training (RT) is the most popular form of exercise that exerts several benefits (muscle hypertrophy and strength). Furthermore, we are witnessing several athletes competing at the highest level of their respective sport have undergone an enormous physical transformation. Nonetheless, lack of RT training, especially after a long detraining period, causes loss of muscle mass, and consequently, a decreased muscle strength, power, and lower muscle activation, and consequently, performance deterioration. In light of these facts, several authors recently have arisen the existence of responders and non-responders to RT. In order to improve athletic performance, the scientific community …
Exothermic adsorption of chromate by goethite
2020
Abstract Goethite is a common Fe oxyhydroxide coating soil particle surfaces, which has a high Cr(VI) adsorption capacity under acidic pH conditions. Batch equilibrium adsorption experiments with chromate concentrations of 0.1, 0.2, and 0.3 mM were performed using solutions with ionic strengths of 0.1, 0.05, and 0.01 M and pH values of 3–11 and at four temperatures between 10 and 75 °C. The results of these experiments show that the amount of chromate adsorbed decreases as the pH increases towards the zero-point-of-surface-charge of goethite (pHPZC 9.1), which is typical for anions. The chromate adsorption efficiency also depends on the ionic strength of the solution. The amount of chromate…
Processing and mechanical properties of organic filer-polypropylene composites
2005
The addition of organic fillers into thermoplastic polymers is an interesting issue, which has had growing consideration and experimentation during the last years. It can give rise to several advantages. First, the cost of these fillers is usually very low. Also, the organic fillers are biodegradable (thus contributing to an improved environmental impact), and finally, some mechanical and thermomechanical properties can be enhanced. In this study, the effect of the addition of different organic fillers on the mechanical properties and processability of an extrusion-grade polypropylene were investigated. The organic fillers came from natural sources (wood, kenaf, and sago) and were compared …
Concrete columns confined with fibre reinforced cementitious mortars: Experimentation and modelling
2014
Abstract The structural behaviour of concrete columns strengthened with a system made up of fibre nets embedded in an inorganic stabilized cementitious matrix under an uniaxial load was investigated. Medium size specimens with circular and square cross-section were cast and subjected to monotonic uniaxial compression, to investigate the efficiency of a p-Phenylene BenzobisOxazole (PBO) Fibre Reinforced Cementitious Mortar (FRCM) system in increasing both strength and ductility. The experimental results show that the confinement system adopted produced a noticeable increment in strength and ductility, though the low mechanical ratios of fibre considered were not always able to ensure hardeni…
Effect of FRP strengthening on the flexural behaviour of calcarenite masonry walls
2017
The use of fiber-reinforced polymers (FRP) for structural strengthening has become increasingly popular in recent years. Several applications of FRP have been proposed and applied, depending on the target of the technique, kind and/or material of the structural member. In particular, because of their great tensile strength, FRP materials are commonly used to enhance the out-of-plane behaviour of masonry walls, allowing to increase their strength, ductility and improving safety against overturning. For these reasons, FRP laminates are often applied in vulnerable ancient buildings in seismic areas to reinforce façades and walls with poor structural features. However, some issues arise when a…
Strengthening of steel-reinforced concrete structural elements by externally bonded FRP sheets and evaluation of their load carrying capacity to face…
2014
The paper has proposed a limit analysis procedure for a preliminary design of RC elements strengthened by externally bonded FRP sheets. The procedure, based on a multi-yield-criteria limit analysis approach, has led to a reliable prediction of peak loads and failure modes of the analyzed elements (slabs) by simultaneously considering the limit state of the constituent materials, so resulting very useful in many applications of engineering interest. The attention has been focused on hospital applications in which increment of service loads or realization of openings can weaken some structural elements that have been strengthened by FRP sheets.