Search results for "structural"

showing 10 items of 5047 documents

Improvement of high modulus asphalt mixtures with average quality aggregate and bitumen by application of polymeric additives

2018

Abstract The paper deals with the development of asphalt mixtures for high performing binder and base courses, modified with both commercial and waste polymeric additives, via dry process. The focus was on the mix design of high performing mixtures making use of average quality aggregate and average penetration grade bitumen (as locally available) instead of the usually required high quality components, manly very hard bitumen, thus aiming to improve the reference mixture as made possible by suitable polymers. Mixtures were subjected not only to conventional tests for mix design purposes, but also to advanced tests for performance evaluation such as rutting resistance and fatigue resistance…

Waste plasticMaterials scienceRut0211 other engineering and technologiesModulus02 engineering and technologyMix designHigh modulus mixtureFatigue resistanceBituminous mixture021105 building & constructionDynamic modulusSettore ICAR/04 - Strade Ferrovie Ed AeroportiGeneral Materials ScienceComposite materialPolymerCivil and Structural Engineeringchemistry.chemical_classificationBuilding and ConstructionPolymer021001 nanoscience & nanotechnologychemistryAsphaltGradationMaterials Science (all)0210 nano-technologyConstruction and Building Materials
researchProduct

Three-dimensional numerical simulation of wind-driven flows in closed channels and basins

2005

In the paper, a fully 3D finite-volume numerical model is developed and employed for the prediction of wind-induced flows in a regular channel and in a square basin with a complex bathymetry. Numerical results are compared with laboratory experiments. Numerical tests are then performed to investigate whether simplifying assumptions about the pressure distribution and the turbulente stresses representation can be employed in the simulation of wind-driven flows. The hydrostatic pressure assumption, resulting in the use of "quasi-3D" models, proved to be reasonably acceptable in order to obtain the vertical profile of the streamwise velocity component away from the boundaries. The quasi-3D mod…

Water Science and TechnologyCivil and Structural EngineeringJournal of Hydraulic Research
researchProduct

New-stage discharge relationship for weirs of finite crest lenght

2014

AbstractThe flow process of weirs of finite crest length is analyzed on the basis of the dimensional analysis and incomplete self-similarity theory. The crest length is incorporated in the functional stage-discharge relationship for weirs of finite crest length. The theoretically deduced stage-discharge formula was then calibrated using the experimental data compiled in this research. According to the current experimental data it is also concluded that the performance of the proposed stage-discharge formula is better than the previous dimensional stage-discharge formulae. Also, the proposed stage-discharge formula is applicable for all types of the weirs, i.e., long-crested, broad-crested, …

Water dischargeEngineeringanimal structuresCurrent (mathematics)Basis (linear algebra)business.industryMathematical analysisWeir of finite crest lengthAgricultural and Biological Sciences (miscellaneous)Stage-discharge relationshipembryonic structuresSettore AGR/08 - Idraulica Agraria E Sistemazioni Idraulico-ForestaliGeotechnical engineeringCrestStage (hydrology)businessIncomplete self-similarityFlow processWater Science and TechnologyCivil and Structural Engineering
researchProduct

Closure to “Theoretical End‐Depth‐Discharge Relationship for Free Overfall” by Vito Ferro

2000

Water dischargeHydrologyClosure (topology)MechanicsAgricultural and Biological Sciences (miscellaneous)Choked flowGeologyFlow measurementWater Science and TechnologyCivil and Structural EngineeringJournal of Irrigation and Drainage Engineering
researchProduct

Analytical Solution of the Richards Equation under Gravity-Driven Infiltration and Constant Rainfall Intensity

2020

In the field of soil hydrology, the Richards equation is commonly used to model water flow in unsaturated soils. The high nonlinearity of the Richards equation makes it very challenging to solve analytically for situations that are meaningful in practical applications. In this paper, an exact and simple analytical solution of the Richards equation under gravity-driven infiltration and constant rainfall intensity is derived. First, the solution is presented under Torricelli's law, which mimics the soil hydraulic conductivity function and describes the emptying or filling process of a nonlinear water reservoir. Then, following a similar approach, the solution is extended to the Brooks and Cor…

Water flowSoil scienceSoil hydrologyNonlinear systemInfiltration (hydrology)Soil waterRichards equation analytical solution soil water infiltrationSettore AGR/08 - Idraulica Agraria E Sistemazioni Idraulico-ForestaliEnvironmental ChemistryRichards equationGeologyGeneral Environmental ScienceWater Science and TechnologyCivil and Structural EngineeringJournal of Hydrologic Engineering
researchProduct

Investigation into water retention behaviour of deformable soils

2013

The paper presents an experimental and modelling approach for the soil-water retention behaviour of two deformable soils. The objective is to investigate the physical mechanisms that govern the soil-water retention properties and to propose a constitutive framework for the soil-water retention curve accounting for the initial state of compaction and deformability of soils. A granular soil and a clayey soil were subjected to drying over a wide range of suctions so that the residual state of saturation could be attained. Different initial densities were tested for each material. The soil-water retention curves (SWRCs) obtained are synthesized and compared in terms of water content, void rati…

Water retention curveSoil-water retention curveSoil watermedicineEnvironmental scienceDeformable mediaUnsaturated soilGeotechnical engineeringmedicine.symptomGeotechnical Engineering and Engineering GeologyConstitutive modellingCivil and Structural EngineeringWater retentionCanadian Geotechnical Journal
researchProduct

Integración de restos arqueológicos Almohades en el metropolitano de Granada. La investigación multidisciplinar para el proyecto y desarrollo de infr…

2014

The execution of the Granada Metropolitan’s underground line made possible the discovery of archeological remains of a water tank in Alcázar Genil, a royal muslim residence of the 13th century. The water tank, 419 × 88 ft, was destroyed at its ends due to the growth of the city of Granada during the 20th century and today remains only its center section, under Camino de Ronda, exactly where the future Metropolitan will take place. The location of an underground station will allow the recovery, the integration and the exhibition of the archaeological remains of this water tank. The Alcázar Genil station project brings together the work of several disciplines which put in the same level engin…

Water tankGranadaEnvironmental EngineeringHistoryinterdisciplinarPatrimonio culturalarquitecturaNA1-9428lcsh:TH1-9745Alcazar GenilExhibitionInterdisciplinaryArchitectureAlbercónlcsh:NA1-9428ArquitecturaCivil and Structural EngineeringBuilding constructionInterdisciplinarBuilding and Constructioncultural heritageMetropolitan areainterdisciplinaryAlcázar GenilCultural heritagepatrimonio culturalResidencelcsh:ArchitectureHumanitiesTH1-9745lcsh:Building constructionInformes de la Construcción
researchProduct

Competition and horizontal integration in maritime freight transport

2010

This paper develops a theoretical model for freight transport characterized by competition between means of transport (the road and maritime sectors), where modes are perceived as differentiated products. Competitive behavior is assumed in the road freight sector, and there are constant returns to scale. In contrast, the freight maritime sector is characterized by oligopolistic behavior, where shipping lines enjoy economies of scale. The market equilibrium where the shipping lines behave as profit maximizers, provides a first approximation to the determinants of market shares, profits, and user welfare. We then characterize the equilibrium when horizontal integration of shipping lines occur…

Water transportHorizontal integrationExploitfreight transport shipping lines horizontal integrationTransportationEconomies of scaleCompetition (economics)OligopolyCommerceDifferentiated servicesEconomicsProduction (economics)Business and International ManagementIndustrial organizationCivil and Structural Engineering
researchProduct

Numerical and experimental investigation of a cross-flow water turbine

2016

ABSTRACTA numerical and experimental study was carried out for validation of a previously proposed design criterion for a cross-flow turbine and a new semi-empirical formula linking inlet velocity to inlet pressure. An experimental test stand was designed to conduct a series of experiments and to measure the efficiency of the turbine designed based on the proposed criterion. The experimental efficiency was compared to that from numerical simulations performed using a RANS model with a shear stress transport (SST) turbulence closure. The proposed semi-empirical velocity formula was also validated against the numerical solutions for cross-flow turbines with different geometries and boundary c…

Water turbine020209 energyFlow (psychology)experimental facility02 engineering and technology010501 environmental sciences01 natural sciencesTurbinehydraulic modelSettore ICAR/01 - IdraulicaPhysics::Fluid Dynamics0202 electrical engineering electronic engineering information engineeringShear stressBoundary value problem0105 earth and related environmental sciencesWater Science and TechnologyCivil and Structural EngineeringTurbulenceMechanicshydraulics of renewable energy systemhydraulic machinery designCross-flow turbine; experimental facility; hydraulic machinery design; hydraulic model; hydraulics of renewable energy systems; RANS modelCross-flow turbineRANS modelEnvironmental scienceCross-flow turbineReynolds-averaged Navier–Stokes equations
researchProduct

Wavelet Analysis and Denoising: New Tools for Economists

2007

This paper surveys the techniques of wavelets analysis and the associated methods of denoising. The Discrete Wavelet Transform and its undecimated version, the Maximum Overlapping Discrete Wavelet Transform, are described. The methods of wavelets analysis can be used show how the frequency content of the data varies with time. This allow us to pinpoint in time such events as major structural breaks. The sparse nature of the wavelets representation also facilitates the process of noise reduction by nonlinear \textit{wavelet shrinkage,} which can be used to reveal the underlying trends in economic data. An application of these techniques to the UK real GDP (1873--2001) is described. The purpo…

Wavelets Denoising Structural Breaks Trend Estimation.Settore SECS-P/05 - Econometria
researchProduct