Search results for "structural"
showing 10 items of 5047 documents
Extreme thermophilic (70°C), VFA-fed UASB reactor: performance, temperature response, load potential and comparison with 35 and 55°C UASB reactors
1999
Abstract The paper evaluates the reactor performance, load potential and temperature response of a 70°C, VFAs-fed UASB reactor, seeded with mesophilic granular sludge. Batch experiments were, in addition, conducted to assess the effect of temperature on the achievable residual VFAs in the 70°C effluent. The performance of similarly-fed and seeded 35 and 55°C UASB reactors was also tested. At a short HRT (2–3 h) and a moderate VLR of 12–20 g COD l−1 d−1, the 70°C UASB achieved 66–74% VFAs removal (acetate and butyrate 84–90%, propionate
Purification of rat liver epoxide hydratase to apparent homogeneity.
1975
Epoxide hydratase (EC 4.2.1.63) is a microsomal enzyme which catalyses the conversion of epoxides to trans-dihydrodiols. Epoxides, produced by the action of microsomal monooxygenases (EC 1.14.1.1) from aromatic and olefinic compounds, are thought to be responsible for many of the harinful effects of polycyclic hydrocarbons and related compounds. Thus epoxide hydratase, together with glutathione 9transferases, (EC 2.5.1.18) may play an important role in the removal of carcinogenic and cytotoxic metabolites (for reviews see [l-3]). It has been reported [4,5] that dihydrodiols formed from some polycyclic hydrocarbons (benz(a)anthracene and benzo(a)pyrene) are reactivated by the microsomal mono…
The effect of partial exfoliation of multilayer silicate filler particles on the elastic properties of a polymer composite
2018
Abstract A method for stepwise calculation the elastic constants of a three-phase composite, including the polymer matrix, the fully exfoliated silicate nanolayers and the platelike silicate particles in the form of multilayer intercalated stacks is considered. A theoretical analysis is carried out by using the Mori–Tanaka theory of an equivalent medium. The influence of degree of exfoliation (the ratio of exfoliated filler content to the total filler content) on the reinforcing efficiency is studied and discussed. A comparative analysis of experimental data of elastic modulus for a rigid polyurethane/montmorillonite composite and prediction results is carried out. It is shown, that with gr…
Synthesis, infrared and M�ssbauer characterization and X-ray crystal structure of 1,10-phenanthrolinium tetrachloromethoxy phenylantimonate(V)
1991
The compound has been characterized by X-ray crystal structure determination, Mossbauer and i.r. spectroscopy. It crystallizes in the monoclinic space groupP21/c (No. 14) witha=24.228(4),b=8.335(2),c=23.975(4) A,β=117.83(3)° andZ=8. Least-squares refinement on 3749 observed reflections gave finalR=0.034 (Rw=0.037). The compound is constituted by [(C6H5)SbCl4OMe]− anions andphenH+cations. The coordination polyhedron about Sb is an octahedron (Sb-Cl 2.416(3), Sb-O 1.962(7) and Sb-C 2.138(9) A). The whole structure is characterized by two short contacts (O(1)⋯N(2) 2.76(1) O(2)⋯N(4) 2.75(1) A) involving the methoxy oxygens of the two independent anionic units [(C6H5)SbCl4OMe]− and two nitrogens…
Insights into the Formation and Structures of Molecular Gels by Diimidazolium Salt Gelators in Ionic Liquids or “Normal” Solvents
2016
Insights are provided into the properties of molecular gels formed by diimidazolium salts both in “normal” solvents and ionic liquids. These materials can be interesting for applications in green and sustainable chemistry in which ionic liquids play a significant role, like catalysis and energy. In particular, two positional isomers of a diimidazolium cation have been examined with a wide range of anions for their ability to form gel phases. In particular, di-, tri-, and tetravalent anions bearing aliphatic or aromatic spacers were paired with the divalent cations. The properties of the organo- and ionogels formed have been analyzed by means of several different techniques, including calori…
Biochemical and Kinetic Analyses of NS5B RNA-Dependent RNA Polymerase of the Hepatitis C Virus
1998
The biochemical properties of the RNA-dependent RNA polymerase (RdRp) of the hepatitis C virus were analyzed. A hexahistidine affinity-tagged NS5B fusion protein was expressed with recombinant baculoviruses in insect cells and purified to near homogeneity. Enzymatic activity of the purified protein was inhibited by KCl or high concentrations of NaCl and was absolutely dependent on Mg2+, which could be replaced by Mn2+. NS5B was found to be processive and able to copy long heteropolymeric templates with an elongation rate of 150-200 nucleotides/min at 22 degreesC. Kinetic constants were determined for all four nucleoside triphosphates and different templates. In case of a heteropolymeric RNA…
On the stability of the 24-meric hemocyanin from Eurypelma californicum.
1998
The stability of the 24-meric hemocyanin from Eurypelma californicum towards various denaturants (GdnHCl, urea, urea derivatives and salts of the Hofmeister series) indicates that the quaternary structure is stabilized by hydrophilic and polar forces. Thus, the interaction between the seven different subunit types of this cheliceratan hemocyanin is comparable with that of the closely related crustacean hemocyanins. In contrast, no significant influence of divalent ions such as Ca2+ and Mg2+ on the stability is observed at pH 8.0 and pH 8.5 but not at pH 7.0. Studies, both in the presence of urea and GdnHCl indicate that the denaturation process consists of a dissociation of the oligomeric s…
Different structural destinations: comparing reactions of [CuBr2(3-Brpy)2] crystals with HBr and HCl gas
2011
Reaction of green crystalline solid trans-[CuBr2(3-Brpy)2] 1 (3-Brpy = 3-bromopyridine) with HBr (aq) vapour yields brown crystalline salt (3-BrpyH)2[CuBr4] 2 with quantitative conversion. Notably 2 adopts a different crystal structure to the three mutually isostructural compounds (3-XpyH)2[CuCl4] (X = Cl, Br) and (3-BrpyH)2[CuBr2Cl2] which result from reaction with HCl. Crystalline product 2 has been characterised by X-ray powder diffraction and its conversion back to 1 at 370–400 K has been followed in situ by synchrotron X-ray powder diffraction. Crystalline 1 and 2 are further notable for the presence of intermolecular C–Br⋯Br–Cu halogen bonds and (only in the case of 2) N–H⋯Br–Cu hydro…
Non-Isomorphic Chlorine—Bromine Substitution in the Copper(I) Halideπ-Complexes with 1-Allyl-4-aminopyridinium
2003
By alternating-current electrochemical synthesis crystals of {Cu[H2NC5H4N(C3H5)]Br2}˙H2O (I), {Cu[H2NC5H4N(C3H5)]Br0.65Cl1.35}˙H2O (II) and {Cu[H2NC5H4N(C3H5)]Cl2} (III) π-complexes have been obtained and structurally investigated. The I and II compounds are isostructural and crystallize in a monoclinic sp. gr. P21/c, I: a = 7.359(2)A, b = 12.3880(6)A, c = 13.637(3)A, β = 107.03(1)°, V = 1188.7(4)A3, Z = 4 for C8H13N2OBr2Cu composition, R = 0.0293 for 2140 reflections. II: a = 7.2771(6)A, b = 12.3338(3)A, c = 13.4366(7)A, β = 107.632(2)°, V = 1149.3(1)A3, Z = 4 for C8H13N2Br0.65Cl1.35Cu composition, R = 0.0463 for 2185 reflections. Metal and halogen atoms form centrosymmetric Cu2X4 dimers. …
Progress in polymeric material for hydrogen storage application in middle conditions
2014
Hydrogen sorption using a manganese oxide anchored to PEEK (Poly(ether-ether-keton)) matrix was studied. The functionalization process and the obtained results on hydrogen storage capability of the synthesized polymer are reported. The functionalised polymer was characterised by Scanning Electron Microscopy, Transmission Electron Microscopy, X-ray diffraction and Volumetric Hydrogen sorption measurements. Different synthesis conditions in terms of precursor concentration and reaction time were used and the direct correlation between manganese oxide percentage and hydrogen storage capability was confirmed. In this way different powders were synthesised. It is assumed that the sample with 78 …