Search results for "substrate"
showing 10 items of 1018 documents
Molybdenum thin-film growth on rutile titanium dioxide ()
2002
Molybdenum films were deposited at room temperature on rutile TiO2(1 1 0) surfaces having different stoichiometries, surface roughnesses and crystallinities. The film structures and compositions and the substrate–film interfaces were investigated by X-ray diffraction, high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy. Different substrate pretreatments resulted in markedly different film and interface structures. Under the growth conditions studied, no amorphous molybdenum oxide interlayers were formed upon deposition in contrast to previous studies. Preferred (1 1 0) textured Mo films grew on both air-annealed and oxygen-bombarded substrates. While sh…
PANI-Based Wearable Electrochemical Sensor for pH Sweat Monitoring
2021
Nowadays, we are assisting in the exceptional growth in research relating to the development of wearable devices for sweat analysis. Sweat is a biofluid that contains useful health information and allows a non-invasive, continuous and comfortable collection. For this reason, it is an excellent biofluid for the detection of different analytes. In this work, electrochemical sensors based on polyaniline thin films deposited on the flexible substrate polyethylene terephthalate coated with indium tin oxide were studied. Polyaniline thin films were abstained by the potentiostatic deposition technique, applying a potential of +2 V vs. SCE for 90 s. To improve the sensor performance, the electronic…
Substrate and atmosphere influence on oxygen p-doped graphene
2016
Abstract The mechanisms responsible for p-type doping of substrate supported monolayer graphene (Gr) by thermal treatments in oxygen ambient have been investigated by micro-Raman spectroscopy, atomic force microscopy (AFM) and X-ray Photoelectron Spectroscopy (XPS), considering commonly employed dielectric substrates, such as SiO 2 and Al 2 O 3 thin films grown on Si. While a high p-type doping (∼10 13 cm −2 ) is observed for Gr on SiO 2 , no significant doping is found for Gr samples on the Al 2 O 3 substrate, suggesting a key role of the Gr/SiO 2 interface states in the trapping of oxygen responsible for the Gr p-type doping. Furthermore, we investigated the doping stability of Gr on SiO…
Inkjet Printable ZnO/PEDOT:PSS Heterojunction for Thin Flexible Semi-Transparent Optoelectronic Sensors
2020
International audience; Flexible sensors play an increasing role in printed electronics and are of interest for optoelectronic applications in flexible robotics and industrial automation. Thus, we have investigated the hybrid inorganic-organic junction between ZnO and PEDOT:PSS (poly(3,4-ethylenedioxythiophene) polystyrene sulfonate). A thin ITO (indium tin oxide) layer on PET (polyethylene terephthalate) foils was used as substrate electrode. ZnO was deposited from a nanoparticle (NP) suspension by electrophoretic deposition. For comparison, we have used three different methods for the deposition of PEDOT:PSS, namely (i) drop casting, (ii) dip-coating, (iii) inkjet printing. For the result…
Highly Stable Thin Films Based on Novel Hybrid 1D (PRSH)PbX3 Pseudo-Perovskites
2021
In this study, the structure and morphology, as well as time, ultraviolet radiation, and humidity stability of thin films based on newly developed 1D (PRSH)PbX3 (X = Br, I) pseudo-perovskite materials, containing 1D chains of face-sharing haloplumbate octahedra, are investigated. All films are strongly crystalline already at room temperature, and annealing does not promote further crystallization or film reorganization. The film microstructure is found to be strongly influenced by the anion type and, to a lesser extent, by the DMF/DMSO solvent volume ratio used during film deposition by spin-coating. Comparison of specular X-ray diffraction and complementary grazing incidence X-ray diffract…
Growth of manganese sulfide (α-MnS) thin films by thermal vacuum evaporation: Structural, morphological and optical properties
2016
Abstract MnS thin films have been successfully prepared by thermal evaporation method at different substrate temperatures using different masses of MnS powder. The prepared films were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and UV–visible spectrophotometry. The XRD measurements show that the films crystallized in the pure α-MnS for substrate temperatures above 100 °C. The optical bandgap of thin films is found to be in the range of 3.2–3.3 eV. A factorial experimental design was used for determining the influence of the two experimental parameters on the films growth.
Nanotribological, nanomechanical and interfacial characterization of atomic layer deposited TiO2 on a silicon substrate
2015
Abstract For every coating it is critical that the coatings are sufficiently durable to withstand practical applications and that the films adhere well enough to the substrate. In this paper the nanotribological, nanomechanical and interfacial properties of 15–100 nm thick atomic layer deposited (ALD) TiO 2 coatings deposited at 110–300 °C were studied using a novel combination of nanoscratch and scanning nanowear testing. Thin film wear increased linearly with increasing scanning nanowear load. The film deposited at 300 °C was up to 58±11 %-points more wear-resistant compared to the films deposited at lower temperatures due to higher hardness and crystallinity of the film. Amorphous/nanocr…
Integrated Optical Amplifier-Photodetector on a Wearable Nanocellulose Substrate
2018
Flexible optoelectronics has emerged as an outstanding platform to pave the road toward vanguard technology advancements. As compared to conventional rigid substrates, a flexible technology enables mechanical deformation while maintaining stable performance. The advantages include not only the development to novel applications, but also the implementation of a wearable technology directly in contact with a curved surface. Here the monolithic integration of a perovskite‐based optical waveguide amplifier together with a photodetector on a nanocellulose substrate is shown to demonstrate the feasibility of a stretchable signal manipulation and receptor system fabricated on a biodegradable mater…
Nanoporous kaolin
2017
Cellulose nano- and microfibrils (CNF/CMF) grades vary significantly based on the raw materials and process treatments used. In this study four different CNF/CMF grades were combined with kaolin clay pigment particles to form nanoporous composites. The attained composite properties like porosity, surface smoothness, mechanical properties and density properties depended strongly on the raw materials used. In general, higher kaolin content (~80 wt%) led to controllable shrinkage during drying, which resulted in improved dimensional stability of composites, compared to a lower kaolin content (~50 wt%). On the other hand, the use of a plasticizer and a high amount of CNF/CMF was essential to pr…
Dynamics of a Spreading Nanodroplet: A Molecular Dynamic Simulation
2003
The spreading of polymer nanodroplets upon a sudden change from partial to complete wetting on an ideally flat and structureless solid substrate has been studied by molecular dynamic simulations using a coarse-grained bead-spring model of flexible macromolecules. Tanner's law for the growth of the lateral droplet radius {R(f) t 0.1 } is found to hold as long as the droplet does not disintegrate into individually moving chains. The data for the contact angle θ following from Tanner's law correspond to a dependence on time {θ(t) t -0.3 }. Our analysis of the mean square displacements of the polymer centers of mass reveals several dynamic regimes during the process of spreading. PACS numbers: …