Search results for "surface"
showing 10 items of 9345 documents
On the Stability of Polymeric Nanoparticles Fabricated through Rapid Solvent Mixing.
2018
We study the stability of polymeric nanoparticles fabricated through the rapid mixing of polymers in a good solvent with a poor solvent that is miscible with the good solvent. In previous experiments where water was used as the poor solvent, a negative surface charge was measured on the precipitated nanoparticles, which led to the long-time stability of the dispersion. It was argued that these charges originate presumably from either water or hydroxide adsorption at the hydrophobic nanoparticle surface or from impurities in the feed streams that preferentially adsorb on the precipitated nanoparticles. To elucidate the origin of this stabilization mechanism, we performed experiments wherein …
Effect of the Components Molar Mass and of the Mixing Conditions on the Compatibilization of PE/LCP Blends by PE-g-LCP Copolymers
1999
The rheology, morphology, and mechanical properties of blends of high-density polyethylene (HDPE) with a semiflexible liquid crystalline copolyester (SBH) were studied in order to assess the compatibilizing ability of added PE-g-SBH copolymers, and its dependence on the molar mass of the PE matrix, and on the technique used for blend preparation. The PE-g-SBH copolymers were synthesized as described in previous articles, either by the polycondensation of the SBH monomers in the presence of a functionalized PE sample containing free carboxyl groups, or by reactive blending of the latter polymer with preformed SBH. Two samples of HDPE having different molar masses, and two samples of SBH with…
Interfacial Tensions from Drop Retraction versus Pendant Drop Data and Polydispersity Effects
2004
Interfacial tensions sigma were measured by means of both methods for the following polymer pair: polyisobutylene (PIB 3) plus poly(dimethylsiloxane) (PDMS 152) and poly(dimethyl-co-methylphenylsiloxane) (CoP26*) plus PDMS 48. The numbers after the abbreviation state the molar masses in kilograms; the homopolymers exhibit polydispersities on the order of 2. The reliability of the method of drop retraction is backed up by systematic measurements, which demonstrate that it is possible to study the time evolution of sigma. Because of the free choice of the phases (drop or matrix) and the possibility to vary the overall composition of the system in a wide range, drop retraction yields more info…
Nanoclays for Conservation
2019
Within the conservation of artworks materials, this chapter describes innovative strategies based on clay nanoparticles that are promising for protective coating, surface cleaning, and consolidation. We present the preparation of polymer/montmorillonite nanocomposites, which are revealed as efficient protective coatings for highly porous stones, marbles, and bread-made artifacts. Anticorrosive films for metal substrates have been obtained by polymer filling with laponite and halloysite nanotubes (HNTs) containing corrosion inhibitors into their lumen. The dispersion of hydrophobically modified HNTs into chitosan matrix drives to fabricate biofilms with surface cleaning capacity. Rust stains…
Polyisoprene-carbon black nanocomposites as tensile strain and pressure sensor materials
2004
Abstract Electrically conductive polymer composites (ECPC) are shown as prospective large-size flexible pressure and stretch sensors for detecting of dangerous deformations and vibrations of vehicle parts. Reversible change of resistance dependent on stretch and pressure is obtained in electro-conductive polymer nanocomposites. At certain concentrations of carbon nano-particles a change of electrical resistance by more than four orders is observed at 40% relative stretch. The maximum sensitivity of nanocomposites is observed in the vicinity of the transition of electro-conductive percolation. Nanocomposites exhibit a very weak semiconductor-like temperature dependence of resistance. The ten…
Towards completely miscible PMMA nanocomposites reinforced by shear-stiff, nano-mica
2014
Abstract Optimizing the reinforcement of polymers with nanoplatelets requires optimization of the aspect ratio and the moduli of the filler while providing a complete stress transfer. Employing a novel shear-stiff, nano-mica with large aspect ratio, we focus on maximizing the interfacial interaction between filler and matrix. External surfaces of the nano-mica were selectively modified by a polycationic macro-initiator and two PMMA-polymer brushes of length below and above critical entanglement length, respectively, and the mechanical properties of the three PMMA nanocomposites were measured. The multiple electrostatic anchoring groups of the macro-initiator not only provide reliable adhesi…
Modeling and stress-strain characteristics of the mechanical properties of carbon-nanotube-reinforced poly(vinyl acetate) nanocomposites
2011
Polymer/carbon nanotube (CNT) composites are one of the most perspective advanced materials developed in recent years. The properties of CNT-reinforced polymer composites, however, strongly depend on structural aspects of the nanostructured filler and on its dispersion quality in a polymer matrix. Consequently, this research was devoted to the investigation of multiwalled-CNT-modified poly(vinyl acetate) (PVAc) composites with respect to the mechanical property dependence on some structural characteristics of CNTs. PVAc/CNT nanocomposites were obtained with a solution casting technique. The amount of CNTs was changed from 0.01 up to 2 wt %. The stress–strain characteristics of PVAc/CNT nano…
Liquid crystalline phases from polymer functionalized ferri-magnetic Fe3O4nanorods
2017
Here, we present the surface functionalization of anisotropic in form ferri-magnetic Fe3O4-nanorods (NRs) with a diblock copolymer, having a PMMA- or PDEGMEMA-block, for solubilization, and a dopamine anchor block. These polymers were synthesized through RAFT polymerization via a macro-initiator approach. The successful surface functionalization, performed via a grafting-to method, was monitored using TGA, IR and TEM measurements. The NRs were very soluble in organic solvents after functionalization. Afterwards, the liquid crystalline (LC) behavior was investigated. During solvent evaporation, birefringent domains were formed. The self-assembly into lyotropic LC structures could be observed…
Luminescent and Magnetoresponsive Multifunctional Chalcogenide/Polymer Hybrid Nanoparticles
2013
Cadmium sulfide/magnetite/polymer multifunctional hybrid nanoparticles are prepared by crystallizing CdS in a controlled manner on the surface of phosphonate-functionalized polystyrene particles with a magnetic core. The supporting polymer magnetoresponsive nanoparticles are produced by a modified miniemulsion polymerization process: a first miniemulsion containing the core monomer (styrene) and a phosphonate-functionalized surface-active monomer is mixed with a second miniemulsion containing magnetite nanoparticles capped with oleic acid and the same surface-active monomer. The chalcogenide formation occurs in situ at the surface of the polymer particles by adding a precipitating agent (so…
Magnetic molecular nanostructures: Design of magnetic molecular materials as monolayers, multilayers and thin films
2007
In this paper we summarize the importance and versatility of the molecular approach in the design and development of novel magnetic molecular materials. These materials processing, in order to obtain controlled molecular structures at the nanoscale, will also be remarked.