Search results for "table"

showing 10 items of 2807 documents

Removal and fate of endocrine disruptors chemicals under lab-scalepostreatment stage. Removal assessment using light, oxygen and microalgae

2013

[EN] The aim of this study was to assess the effect of light, oxygen and microalgae on micropollutants removal. The studied micropollutants were 4-(1,1,3,3-tetramethylbutyl)phenol (OP), technical-nonylphenol (t-NP), 4-n-nonylphenol (4-NP), Bisphenol-A (BPA). In order to study the effect of the three variables on the micropollutants removal, a factorial design was developed. The experiments were carried out in four batch reactors which treated the effluent of an anaerobic membrane bioreactor. The gas chromatography mass spectrometry was used for the measurement of the micropollutants. The results showed that light, oxygen and microalgae affected differently to the degradation ratios of each …

Environmental EngineeringAlkylphenolLightBioengineeringPortable water purificationEndocrine DisruptorsSolid-phase microextractionGas Chromatography-Mass SpectrometryWater PurificationLimit of DetectionMicroalgaeWaste Management and DisposalEffluentSolid Phase MicroextractionTECNOLOGIA DEL MEDIO AMBIENTERenewable Energy Sustainability and the EnvironmentChemistryRemoval endocrine disruptorsSorptionGeneral MedicineFactorial experimentOxygenBiodegradation EnvironmentalEnvironmental chemistryAdsorptionAerationGas chromatography–mass spectrometryWater Pollutants Chemical
researchProduct

The role of EPS concentration in MBR foaming: analysis of a submerged pilot plant.

2010

Foaming in Membrane BioReactor (MBR) is a frequently discussed topic. Some authors reported that the phenomenon is due to filamentous organisms, like at Conventional Activated Sludge (CAS) plants. However, in recent years, other authors reported that the Extra-cellular Polymer Substances (EPSs) concentration is an important factor for controlling foam as well. Nevertheless, even if a number of MBR plants are affected by foaming, presently there are no suitable methods to evaluate the phenomenon. To facilitate the study of this controversial phenomenon in an MBR system, certain foam tests proposed in the past for CASPs were investigated. The results of the tests were able to adequately measu…

Environmental EngineeringBiofoulingSurface PropertiesBioengineeringPortable water purificationPilot ProjectsMembrane bioreactorWater PurificationMBRBiofoulingBiopolymersBioreactorsFoam testBioreactorcardiovascular diseasesWaste Management and DisposalSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleWaste managementSewageViscosityRenewable Energy Sustainability and the EnvironmentChemistryMembranes ArtificialGeneral MedicinePulp and paper industryPilot plantActivated sludgelipids (amino acids peptides and proteins)EPSExtracellular SpaceProtein concentrationFoamingBioresource technology
researchProduct

Comparison of organic peracids in wastewater treatment: Disinfection, oxidation and corrosion.

2015

The use of organic peracids in wastewater treatment is attracting increasing interest. The common beneficial features of peracids are effective anti-microbial properties, lack of harmful disinfection by-products and high oxidation power. In this study performic (PFA), peracetic (PAA) and perpropionic acids (PPA) were synthesized and compared in laboratory batch experiments for the inactivation of Escherichia coli and enterococci in tertiary wastewater, oxidation of bisphenol-A and for corrosive properties. Disinfection tests revealed PFA to be a more potent disinfectant than PAA or PPA. 1.5 mg L(-1) dose and 2 min of contact time already resulted in 3.0 log E. coli and 1.2 log enterococci r…

Environmental EngineeringCarbon steelFormatesDisinfectantPortable water purificationengineering.materialWastewaterWaste Disposal FluidCorrosionWater Purificationchemistry.chemical_compoundPhenolsWater SupplyPeracetic acidEscherichia coliPeracetic AcidBenzhydryl CompoundsHydrogen peroxideWaste Management and DisposalWater Science and TechnologyCivil and Structural EngineeringPerformic acidWaste managementEcological ModelingPollutionPeroxidesCorrosionDisinfectionchemistryWastewaterSteelengineeringPropionatesOxidation-ReductionEnterococcusWater Pollutants ChemicalNuclear chemistryDisinfectantsWater research
researchProduct

BIOALGA reactor: preliminary studies for heavy metals removal

2002

Abstract Microalgae have a high affinity for polyvalent metals, for that reason they could be used to reduce the concentration of heavy metals present in water and wastewater. In the present work an evaluation of a rotary biofilm reactor for algae immobilization (BIOALGA) with the subject of heavy metal removal was investigated. The BIOALGA reactor consisted of a pilot scale model that was operated with synthetic wastewater with an initial concentration of 3000 μg/l of cobalt ion. Scenedesmus obliquus was immobilized in the reactor, which was operated in batch mode for a period of 20 days. The rotary velocity used, 2 rpm, was constant during the experiment. A maximum removal of cobalt ion o…

Environmental EngineeringChromatographyPeriod (periodic table)ChemistryInorganic chemistryBiomedical EngineeringBioengineeringHeavy metalsMetalWastewaterScenedesmus obliquusvisual_artBatch processingvisual_art.visual_art_mediumCobalt ionsKinetic constantBiotechnologyBiochemical Engineering Journal
researchProduct

Sorption of heavy metals in the biomass of alga Palmaria palmata

2013

Sorption of heavy metals by the sea alga Palmaria palmata was investigated in laboratory conditions. The sorption process of the analytes was carried out with constant flow of the solutions through the algae samples. The Langmuir isotherm model was used to describe equilibria. The experiments confirmed that 50 min of exposure of algae with little heavy metal contamination in contaminated waters results in the increase of concentration of these analytes, proportional to their concentration in the tested waters. On the basis of the Langmuir isotherm direction factor, a = (c(a,max) × K)−1, affinity of heavy metals and algae increases in the following sequence: Mn2+ < Zn2+ ≈ Cd2+ &lt…

Environmental EngineeringChromatographybiologyChemistrySodiumAnalytical chemistrychemistry.chemical_elementLangmuir adsorption modelPortable water purificationSorptionHydrogen-Ion Concentrationbiology.organism_classificationWater PurificationIonsymbols.namesakeAdsorptionPalmaria palmataAlgaeMetals HeavyRhodophytasymbolsAdsorptionBiomassWater Pollutants ChemicalWater Science and TechnologyWater Science and Technology
researchProduct

Rapid and improved identification of drinking water bacteria using the Drinking Water Library, a dedicated MALDI-TOF MS database.

2021

Abstract According to the European Directives (UE) 2020/2184 and 2009/54/EC, which establishes the sanitary criteria for water intended for human consumption in Europe, water suitable for human consumption must be free of the bacterial indicators Escherichia coli, Clostridium perfringens and Enterococcus spp. Drinking water is also monitored for heterotrophic bacteria, which are not a human health risk, but can serve as an index of bacteriological water quality. Therefore, a rapid, accurate, and cost-effective method for the identification of these colonies would improve our understanding of the culturable bacteria of drinking water and facilitate the task of water management by treatment f…

Environmental EngineeringDatabases FactualMicrobiologiacomputer.software_genreBacterisWater PurificationIdentification rateHuman healthEscherichia coliDrinking waterHumansWaste Management and DisposalWater Science and TechnologyCivil and Structural EngineeringDatabasebiologyBacteriaEcological ModelingDrinking WaterWaterBacteria PresentBottled waterbiology.organism_classificationPollutionAigua potableMatrix-assisted laser desorption/ionizationAiguaEscheríchia coliSpectrometry Mass Matrix-Assisted Laser Desorption-IonizationEnvironmental scienceWater treatmentWater qualitycomputerBacteriaWater research
researchProduct

Geochemical characterisation of the thermo-mineral waters of Greece

2021

AbstractGeothermal areas of Greece are located in regions affected by recent volcanism and in continental basins characterised by elevated heat flow. Many of them are found along the coast, and thus, water is often saline due to marine intrusion. In the current study, we present about 300 unpublished and literature data from thermal and cold mineral waters collected along Greece. Samples were analysed for major ions, Li, SiO2 and isotopes in water. Measured temperatures range from 6.5 to 98 °C, pH from 1.96 to 11.98, while Total Dissolved Solutes (TDS) from 0.22 to 51 g/L. Waters were subdivided into four main groups: (1) thermal; (2) cold; (3) acidic (pH < 5); and (4) hyperalkaline (pH …

Environmental EngineeringGlobal meteoric water lineδ18OCarbon dioxide Geothermometry Hydrogeochemistry Stable isotopesGeochemistry010501 environmental sciences010502 geochemistry & geophysics01 natural scienceschemistry.chemical_compoundIsotopesGeochemistry and PetrologyEnvironmental ChemistrySeawaterGroundwaterGeothermal gradient0105 earth and related environmental sciencesGeneral Environmental ScienceWater Science and TechnologyMineralGreeceStable isotope ratioGeneral MedicineSilicon DioxideSettore GEO/08 - Geochimica E VulcanologiachemistryCarbon dioxideMeteoric waterEnvironmental scienceSeawaterMineral Waters
researchProduct

Acute, chronic and sublethal effects of the herbicide propanil on Daphnia magna.

2003

Acute and chronic toxicity tests with propanil were conducted on Daphnia magna. The 24 and 48 h LC50 were 43.74 and 5.01 mg/l respectively. Chronic toxicity tests were carried out using sublethal propanil concentrations (0.07, 0.10, 0.21 and 0.55 mg/l) during 21 days. The effect of propanil on survival, reproduction and growth of D. magna organisms was monitored. The parameters used to evaluate herbicide effect on reproduction were: mean total young ones per female, mean brood size, time to first reproduction, mean number broods per female and intrinsic rate of natural increase (r). Survival and growth (body length) were also determined after 21 days of exposure to the herbicide. Reproducti…

Environmental EngineeringHealth Toxicology and MutagenesisDaphnia magnaPropanilToxicologychemistry.chemical_compoundEatingAnimal sciencePropanilToxicity Tests AcuteEnvironmental ChemistryAnimalsToxicity Tests ChronicChronic toxicityEC50biologyHerbicidesReproductionPublic Health Environmental and Occupational HealthGeneral MedicineGeneral Chemistrybiology.organism_classificationPollutionchemistryCladoceraDaphniaMaximum acceptable toxicant concentrationToxicityToxicantChemosphere
researchProduct

Ferric sludge derived from the process of water purification as an efficient catalyst and/or support for the removal of volatile organic compounds

2019

Ferric chloride solutions are used as coagulants or flocculants in water treatment operations for human consumption. This treatment produces large amounts of clay-type solids formed mainly of montmorillonite with iron oxides and humic substances. This ferric sludge can be used as an efficient catalyst for the removal of volatile organic compounds (VOCs) by total oxidation. This waste isolated in the purification process has been activated by calcinations in air, characterized by several physicochemical techniques and employed as a catalyst for the removal by total oxidation of representative VOCs: toluene, propane and mixtures of toluene/propane with or without water. This ferric sludge has…

Environmental EngineeringMaterials scienceHealth Toxicology and Mutagenesis0208 environmental biotechnologychemistry.chemical_elementPortable water purification02 engineering and technology010501 environmental sciencesFerric CompoundsSludge01 natural sciencesCatalysisWater PurificationmedicineEnvironmental ChemistryEfficient catalystValenciaPlatinum0105 earth and related environmental sciencesVolatile Organic CompoundsSewagebiologyWaste managementPublic Health Environmental and Occupational HealthVOCsGeneral MedicineGeneral Chemistrybiology.organism_classificationPollutionPurification of water020801 environmental engineeringchemistryScientific methodFerricSupportPlatinumOxidation-Reductionmedicine.drugChemosphere
researchProduct

Electrochemical treatment of aqueous solutions of organic pollutants by electro-Fenton with natural heterogeneous catalysts under pressure using Ti/I…

2018

The treatment of toxic organic pollutants by electro-Fenton (EF) presents some drawbacks such as the necessity to work at low pH and the low solubility of oxygen in water contacted with air or oxygen at room pressure that results often in slow and relatively low abatements. Here, the coupled adoption of natural heterogeneous catalysts and of relatively high pressure was proposed in order to improve the performances of EF for the treatment of organic pollutants. Caffeic acid (CA) and 3-chlorophenol were used as model resistant organic pollutants. EF process was performed using both conventional homogeneous FeSO4 and natural heterogeneous catalysts (pyrite, chalcopyrite, Fe2O3 and Fe3O4) as i…

Environmental EngineeringMaterials scienceHealth Toxicology and MutagenesisElectro-Fenton Organic pollutants Natural heterogeneous catalysts Pressurized electro-Fentonchemistry.chemical_elementPortable water purification02 engineering and technology010501 environmental sciencesHeterogeneous catalysis01 natural sciencesOxygenCatalysisEnvironmental ChemistrySolubility0105 earth and related environmental sciencesPollutantAqueous solutionPublic Health Environmental and Occupational HealthGeneral MedicineGeneral Chemistry021001 nanoscience & nanotechnologyPollutionAnodechemistryChemical engineering0210 nano-technology
researchProduct