Search results for "talteenotto"
showing 10 items of 25 documents
To incinerate or not? - Effects of incineration on the concentrations of heavy metals and leaching efficiency of post-precipitated sewage sludge (RAV…
2020
The major element and heavy metal concentrations of post-precipitated sewage sludge (PPS) and its ash residue (PPA) were determined using microwave digestion followed by inductively coupled plasma optical emission spectrometry (ICP-OES) and mass spectrometry (ICP-MS). To the best of our knowledge, this has not been previously done. In both PPS and PPA the heavy metal concentrations were clearly below the average concentrations than those encountered in sewage sludge in Europe. The leaching efficiency of the metal (Al/ Fe) used as a precipitation agent from post-precipitated sludge and its ash residue with phosphoric acid was also investigated with previously optimized leaching conditions. T…
Porous 3D Printed Scavenger Filters for Selective Recovery of Precious Metals from Electronic Waste
2018
Selective laser sintering (SLS) 3D printing is used to fabricate highly macroporous ion scavenger filters for recovery of Pd and Pt from electronic waste. The scavengers are printed by using a mixture of polypropylene with 10 wt% of type‐1 anion exchange resin. Porosities and the flow‐through properties of the filters are controlled by adjusting the SLS printing parameters. The cylinder‐shaped filters are used in selective recovery of Pd and Pt from acidic leachate of electronic waste simply by passing the solution through the object. Under such conditions, the scavenger filters are able to capture Pd and Pt as anionic complexes with high efficiency from a solution containing mixture of dif…
Selective recovery of phosphorus as AlPO4 from silicon-free CFB-derived fly ash leachate
2018
The prospect of phosphorus (P) recovery from siliceous fly ash was investigated. The phosphorus content in the pristine fly ash was 1.21%. Obtaining pure phosphorus products from fly ash is very challenging because of high concentration of other elements, silicon (Si) at 17.3% being the major contaminant. The fly ash was fractionated with sieve size of 125 μm to concentrate the phosphorus in the small-size fraction, which also facilitated the removal of 78% of silica (Si) in the solid phase. The fractionated fly ash was treated with 8 M HCl in order to remove 98% of Si by aging (5 h) of leachate until precipitation of Si-gel, and a phosphorus-rich solution is obtained. Iron (Fe) is also con…
Utilization of waste sodium sulfate from battery chemical production in neutral electrolytic pickling
2021
Several industrial activities produce metal sulfates, which are controlled by strict limitations for wastewater concentrations of sulfate. One emerging area where these activities occur is the production of lithium-ion battery chemicals in which sodium sulfates are formed because of cathode precursor co-precipitation. Several solutions for sulfate removal exist, but one option is to reuse the sulfate side stream in other processes to increase circular economy and atom efficiency. In this paper, the reuse of sodium sulfate solution in a steel industry pickling solution is considered. Neutral electrolytic pickling experiments were carried out to compare the pickling behavior of the electrolyt…
Surfactant-based enrichment of rare earth elements from NdFeB magnet e-waste: Optimisation of cloud formation and rare earths extraction
2023
Appropriate waste and resource management are essential for a sustainable circular economy with reduced environmental impact. With critical resources, e-waste may serve as indirect raw material. For example, with NdFeB permanent magnets, Neodymium (Nd) and the co-present Dysprosium (Dy) are critical rare earth elements (REEs). However, there exists no economically viable technology for recycling them from electronic waste (e-waste). Here, a method is presented based on cloud point extraction (CPE). The work involves basic complexation chemistry in a cloud medium with pure REE salts, as well as, with real NdFeB-magnets (nearly 28% REE content by weight) from an old hard disk drive (5.2 g mag…
Optimizing the H3PO4 leaching conditions of post-precipitated sewage sludge using response surface methodology
2018
The leaching procedure of post-precipitated aluminium phosphate sludge with dilute phosphoric acid was developed. The leaching offers a route to recover both critical phosphorous from sewage sludge and the metal used in precipitation. Using phosphoric acid as leaching solution makes it possible to continue the recovery process without the need to remove chloride or sulfate anions. The optimization of the leaching was based on experimental three-level-four-variable central composite face-centered design. The four variables included were acid concentration, volume of acid, temperature and time of leaching. The leaching was conducted for dewatered and water-containing sludge (total solid conte…
Kullan talteenotto sähkö- ja elektroniikkaromusta
2017
Tutkielman kirjallisessa osassa käydään läpi yleisesti kiertotaloutta ja metallien osuutta kiertotaloudessa. Lisäksi kirjallisessa osassa keskitytään sähkö- ja elektroniikkaromun kasvavaan määrään ja sen kierrätyksen tärkeyteen sekä kierrätyksen ongelmiin. Työssä käydään läpi yleiset kullan talteenottotavat, hydrometallurgia, pyrometallurgia sekä fysikaalinen ja mekaaninen erottelu, joita on tutkittu sähkö ja elektroniikkaromun kierrätykseen. Myös yleisimmät kullan analysoinnissa käytetyt menetelmät käydään läpi kirjallisen osan loppuvaiheessa. Kullan talteenotolle kehitettiin menetelmä, jonka avulla kulta pystyttiin ottamaan talteen jopa yli 99 % puhtaudella ja 60–70 % saannoilla liuotetus…
Purification of recovered phosphoric acid by extracting aluminium with di-2-ethylhexyl phosphoric acid
2021
AbstractThe extraction of aluminium from dilute phosphoric acid with di-2-ethylhexyl phosphoric acid (DEHPA) was optimized using response surface methodology. The optimization was based on the experimental three-level central composite face-centred design (CCF) and was conducted on real-life samples. The three variables included were pH, extractant concentration and aqueous to organic phase ratio (AO). Under the optimized conditions (pH 2.5, 0.6 M DEHPA and AO ratio 1:2), extraction efficiency of 99% for aluminium in four extraction stages is achieved. The purified phosphoric acid solution can then be utilized by the fertilizing industry. Stripping tests for organic phase loaded with alumin…
Enzyme-assisted extraction of anthocyanins and other phenolic compounds from blackcurrant (Ribes nigrum L.) press cake: From processing to bioactivit…
2022
The effects of commercial enzymes (pectinases, cellulases, beta-1-3-glucanases, and pectin lyases) on the recovery of anthocyanins and polyphenols from blackcurrant press cake were studied considering two solid:solvent ratios (1:10 and 1:4 w/v). β-glucanase enabled the recovery of the highest total phenolic content – 1142 mg/100 g, and the extraction of anthocyanins was similar using all enzymes (∼400 mg/100 g). The use of cellulases and pectinases enhanced the extraction of antioxidants (DPPH − 1080 mg/100 g; CUPRAC – 3697 mg/100 g). The freeze-dried extracts presented antioxidant potential (CUPRAC, DPPH), which was associated with their biological effects in different systems: antiviral a…
Novel concepts on the recovery of by-products from alkaline pulping
2016
Innovative biorefinery concepts were developed for the separation and utilization of organic materials, especially aliphatic carboxylic acids, lignin, and extractives, which are formed as by-products during wood-based alkaline delignification processes. The partial recovery of sodium as NaOH and aliphatic carboxylic acids from hardwood soda-AQ black liquor was studied via electrodialysis. The lignin was partly (about 59 % of the initial lignin) precipitated from black liquor by carbonation (pH to about 8.5) followed by electrodialysis or H2SO4 (pH to about 2), with subsequent precipitation of more lignin and the liberation of aliphatic acids. The Na2SO4 formed was successfully separated fro…