Search results for "teknologi"
showing 10 items of 1599 documents
Effect of torrefaction on properties of pellets produced from woody biomass
2020
Torrefaction has been recognized as a promising strategy to improve handling and storage properties of wood-based pellets, thus producing a uniform-quality commodity with high energy density and hydrophobicity. In this work, pellets produced from spruce stem wood, bark, and forest residues were torrefied in a bench-scale tubular reactor at 225 and 275 °C with two residence times (30 and 60 min). The effects of torrefaction on general properties, grindability, mechanical properties, hydrophobicity, and microstructure of the studied pellets were investigated. The increase of torrefaction severity reduced mass yields, but the heating values and the fixed carbon content of the torrefied pellets…
Experimental Investigation into the Effect of Pyrolysis on Chemical Forms of Heavy Metals in Sewage Sludge Biochar (SSB), with Brief Ecological Risk …
2021
Experimental investigations were carried out to study the effect of pyrolysis temperature on the characteristics, structure and total heavy metal contents of sewage sludge biochar (SSB). The changes in chemical forms of the heavy metals (Zn, Cu, Cr, Ni, Pb and Cd) caused by pyrolysis were analyzed, and the potential ecological risk of heavy metals in biochar (SSB) was evaluated. The conversion of sewage sludge into biochar by pyrolysis reduced the H/C and O/C ratios considerably, resulting in stronger carbonization and a higher degree of aromatic condensation in biochar. Measurement results showed that the pH and specific surface area of biochar increased as the pyrolysis temperature increa…
A 3D Non-Stationary Cluster Channel Model for Human Activity Recognition
2019
Author's accepted manuscript. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. This paper proposes a three-dimensional (3D) non- stationary fixed-to-fixed indoor channel simulator model for human activity recognition. The channel model enables the formulation of temporal variations of the received signal caused by a moving human. The moving human is modelled by …
Big Data in operations and supply chain management: a systematic literature review and future research agenda
2021
In the era of digitalisation, the role of Big Data is proliferating, receiving considerable attention in all sectors and domains. The domain of operations and supply chain management (OSCM) is no different since it offers multiple opportunities to generate a large magnitude of data in real-time. Such extensive opportunities for data generation have attracted academics and practitioners alike who are eager to tap different elements of Big Data application in OSCM. Despite the richness of prior studies, there is limited research that extensively reviews the extant findings to present an overview of the different facets of this area. The current study addresses this gap by conducting a systema…
Adaptive Backstepping Control of a 2-DOF Helicopter System with Uniform Quantized Inputs
2020
Author's accepted manuscript © 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. This paper proposes a new adaptive controller for a 2-Degree of Freedom (DOF) helicopter system in the presence of input quantization. The inputs are quantized by uniform quantizers. A nonlinear mathematical model is derived for the 2-DOF helicopter system based on Euler-Lagrange equat…
Adaptive Backstepping Control of a 2-DOF Helicopter
2019
This paper proposes an adaptive nonlinear controller for a 2-Degree of Freedom (DOF) helicopter. The proposed controller is designed using backstepping control technique and is used to track the pitch and yaw position references independently. A MIMO nonlinear mathematical model is derived for the 2DOF helicopter based on Euler-Lagrange equations, where the system parameters and the control coefficients are uncertain. Unlike some existing control schemes for the helicopter control, the developed controller does not require the knowledge on the system uncertain parameters. Updating laws are used to estimate the unknown parameters. It is shown that not only the global stability is guaranteed …
Adaptive Backstepping Control of Nonlinear Uncertain Systems With Quantized States
2019
This paper investigates the stabilization problem for uncertain nonlinear systems with quantized states. All states in the system are quantized by a static bounded quantizer, including uniform quantizer, hysteresis-uniform quantizer, and logarithmic-uniform quantizer as examples. An adaptive backstepping-based control algorithm, which can handle discontinuity, resulted from the state quantization and a new approach to stability analysis are developed by constructing a new compensation scheme for the effects of the state quantization. Besides showing the global ultimate boundedness of the system, the stabilization error performance is also established and can be improved by appropriately adj…
Modeling of an active torsion bar automotive suspension for ride comfort and energy analysis in standard road profiles
2019
Abstract Chassis technology is evolving towards active suspension, in which actuators can provide forces to each wheel individually. This overcomes the traditional trade-off between comfort and handling, at the expense of increased complexity and electric consumption. To reduce power demand, regenerative solutions capable of harvesting a certain amount of energy otherwise dissipated in vehicle suspensions and to enhance vehicle dynamics for improving ride comfort and road safety at the same time have been researched. In this paper, an active suspension based on a torsion bar is modeled and analyzed under the excitation from standardized road profiles according to the ISO 8608 norm. A skyhoo…
Model-Free Sliding-Mode-Based Detection and Estimation of Backlash in Drives With Single Encoder
2021
Backlash is a frequently encountered problem for various drives, especially those equipped with a single encoder onside of the controlled actuator. This brief proposes a sliding-mode differentiator-based estimation of unknown backlash size while measuring the actuator displacement only. Neither actuator nor load dynamics are explicitly known, while a principal second-order actuator behavior is assumed. We make use of the different perturbation dynamics distinctive for different backlash modes and an unbounded impulse-type perturbation at impact. The latter leads to transient loss of the sliding-mode and allows for detecting an isolated time instant of the backlash occurrence. The proposed m…
On Stability of Virtual Torsion Sensor for Control of Flexible Robotic Joints with Hysteresis
2019
Author's accepted manuscript (postprint). This article has been published in a revised form in Robotica, http://doi.org/10.1017/S0263574719001358. This version is free to view and download for private research and study only. Not for re-distribution or re-use. © 2019 Cambridge University Press. Available from 25/03/2020. Aim of the virtual torsion sensor (VTS) is in observing the nonlinear deflection in the flexible joints of robotic manipulators and, by its use, improving positioning control of the joint load. This model-based approach utilizes the motor-side sensing only and, therefore, replaces the load-side encoders at nearly zero hardware costs. For being applied in the closed control …