Search results for "tensile"
showing 10 items of 453 documents
Interfacial shear strength of flax fibers in thermoset resins evaluated via tensile tests of UD composites
2012
Abstract A method of interfacial shear strength evaluation, based on the length distribution of fibers pulled out from the tensile fracture surface of an oriented flax-reinforced composite, is applied to composites with vinyl ester and acrylated epoxidized soy oil resin matrices. Two approaches for characterizing the strength of fibers with modified Weibull distribution, fiber fragmentation tests and fiber tension tests, are compared in the analysis of pull-out data. Interfacial shear strength is found to increase by a few percent when loading rate is increased from 1.33% to 8%/min.
Effects of halloysite content on the thermo-mechanical performances of composite bioplastics
2020
Abstract The aim of this study is the design and preparation of Mater-Bi/halloysite nanocomposite materials that could be employed as bioplastics alternative to the petroleum derived products. The biocomposite materials at variable halloysite content (from 0 to 30 wt%) were prepared by using the solvent casting method. We investigated the mechanical behaviour and the thermal properties of the prepared nanocomposites in order to estimate their suitability as biocompatible packaging materials. The thermo-mechanical characteristics were correlated to the nanocomposites' morphologies, which were studied by Scanning Electron Microscopy (SEM). As a general result, the physico-chemical performance…
Effect of Water on the Mechanical Behaviour of Extruded Flat Bread
1997
Abstract The effect of water on the mechanical properties of extruded breads was studied, at room temperature. As the moisture content was increased from 6 to 9% moisture, the resistance to fracture (compression tests) or rupture (tensile tests) was improved. Above this moisture range, plasticisation by water was the dominant phenomenon. The brittle to ductile transition was observed to occur within a moisture content range from 9 to 13·7% (w/w). The influence of water on the crispness of extruded bread, evaluated with sensory evaluation, is also described.
Simplified technique for constitutive analysis of SFRC
2014
Steel fibre reinforced concrete (SFRC) has become widespread material in areas such as underground shotcrete structures and industrial floors. However, due to the absence of material models of SFRC reliable for numerical analysis, application fields of this material are still limited. Due to interaction of concrete with fibres, a cracked section is able to carry a significant portion of tensile stresses, called the residual stresses. In present practices, residual stresses used for strength, deflection and crack width analysis are quantified by means of standard tests. However, interpretation of these test results is based on approximation using empirically deduced relationships, adequacy o…
Tensile behaviour of anti-symmetric CFRP composite
2011
Abstract This paper addresses the response of a 17-ply anti-symmetric carbon/epoxy composite subjected to uniaxial tensile loading. Hashin ply damage model is adopted to describe the damage behaviour of the plies, whereas damage initiation and progression of the interfaces are characterised by mixed-mode cohesive damage model. Force-displacement curves obtained numerically and experimentally show good agreement. Results show that all laminae and interfaces experience the damage except laminae with 0o fibre. In addition, damage is concentrated at the tab and central regions of the tensile specimen. Edge delamination is observed in all interfaces.
Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks
2013
Abstract The increasing use of innovative materials in manufacturing of modern mechanical components has led to the development of reliable joints between innovative (composite materials etc.) and traditional materials (steel, aluminum etc.). In the last few years, hybrid joints, combining the advantages of the adhesive joints and traditional mechanical joints as bolted or riveted joints, have been shown an increasing industrial interest especially in automotive and aerospace sectors. In the present paper a systematic experimental study of hybrid lap joints was carried out with the aim to detect the optimal joint configuration. Tensile tests on hybrid joints made by combining adhesive bondi…
Morphogenetically active scaffold for osteochondral repair (Polyphosphate/alginate/N,O-carboxymethyl chitosan)
2016
Here we describe a novel bioinspired hydrogel material that can be hardened with calcium ions to yield a scaffold material with viscoelastic properties matching those of cartilage. This material consists of a negatively charged biopolymer triplet, composed of morphogenetically active natural inorganic polyphosphate (polyP), along with the likewise biocompatible natural polymers N,O-carboxymethyl chitosan (N,O-CMC) and alginate. The porosity of the hardened scaffold material obtained after calcium exposure can be adjusted by varying the pre-processing conditions. Various compression tests were applied to determine the local (nanoindentation) and bulk mechanical properties (tensile/compressio…
Experimental Investigation on Water Loss and Stiffness of CBTM Using Different RA Sources
2021
Cold recycling of reclaimed asphalt (RA) is a promising technique to build or to maintain roads, combining performance and environmental advantages. Although this technique has been extensively used worldwide, there is no unique and internationally-shared method to characterize cold recycled mixtures. The previous work of the RILEM TC 237-SIB TG6 successfully attempted to characterize different RA sources with both traditional parameters (gradation, bitumen content and geometrical properties) and non-conventional properties (fragmentation and strength testing). The current RILEM TC 264-RAP TG1 mainly focuses on the influence of different RA sources on physical and mechanical characteristics…
Pumice powder as filler of self-compacting concrete
2015
Abstract An experimental study on the rheological and mechanical properties of self-compacting concrete with pumice powder used as filler additive is presented. Self-compacting concrete (SCC) shows its peculiar characteristics in the fresh state and many researches have been developed with reference to its rheological characteristics paying attention to the techniques of self-compacting properties assessment. One of the most important aspect in concrete mix-design is the type and the amount of fillers with respect to water and cement: this amount has great influence not only on self-compacting properties (fluidity, segregation, etc.), but also on the mechanical properties of the mixture. Vo…
New Lignocellulosic Aristida adscensionis Fibers as Novel Reinforcement for Composite Materials: Extraction, Characterization and Weibull Distributio…
2019
In this research, the Aristida adscensionis fibers (AAFs) were taken out from the plants and its fundamental properties anlayzed for the first time. The AAFs were characterized and compared with other natural fibers by the use of physico-chemical analysis and various characterization techniques such as FT-IR, XRD, NMR, TGA, SEM and AFM. Chemical analysis showed that A. adscensionis fibers have a high cellulose content of 70.78% whereas the contents of lignin and wax are equal to 8.91% and 2.26%, respectively. The FT-IR, XRD and NMR analysis confirmed that AAFs are rich in cellulose content with CI and CS equal to 58.9% and 11.5 nm, respectively. Pycnometer analysis allowed to estimate a den…