Search results for "transport"

Spark Plasma Sintering of Metallic Glasses

2019

Spark plasma sintering (SPS) of metallic glasses (MG) can be quite different from sintering crystalline metallic alloys. Indeed, MG behave differently with increasing temperature, as they encounter a glass transition and devitrification. Their shaping can thus be compared to what can be performed on thermoplastic polymers. SPS is a promising way to prepare bulk parts from amorphous powders, since it allows very fast heating and cooling rates. It gives an advantage to avoid or limit devitrification of the amorphous phase upon the thermal cycle. However, diffusion mechanisms, which generally control densification, are activated at temperatures that are not compatible with MG structural integr…

Multiphysical Modeling of Transport Phenomena During Laser Welding of Dissimilar Steels

2016

Abstract The success of new high-strength steels allows attaining equivalent performances with lower thicknesses and significant weight reduction. The welding of new couples of steel grades requires development and control of joining processes. Thanks to high precision and good flexibility, laser welding became one of the most used processes for joining of dissimilar welded blanks. The prediction of the local chemical composition in the weld formed between dissimilar steels in function of the welding parameters is essential because the dilution rate and the distribution of alloying elements in the melted zone determines the final tensile strength of the weld. The goal of the present study i…

Estimation des incertitudes de mesure sur bras polyarticulé portable par méthode de Monte Carlo

2013

International audience; Les bras polyarticulés portables ont progressivement évolué et sont de plus en plus utilisés dans l’industrie. Cependant, à l’heure actuelle, la traçabilité de ces dispositifs est difficile à effectuer et les incertitudes de mesures relatives à l’utilisation de ces appareils ne sont pas quantifiées. Le travail mené consiste à déterminer les incertitudes de mesures associées à la quantification, par un bras polyarticulé portable, des caractéristiques géométriques et dimensionnelles d’une pièce mécanique. Les travaux visant à élaborer un modèle d’incertitude de mesure, sont basés sur la méthode de Monte Carlo du supplément 1 du Guide pour l'expression de l'incertitude …

Rigid Closed‐Cell PUR Foams Containing Polyols Derived from Renewable Resources: The Effect of Polymer Composition, Foam Density, and Organoclay Fill…

2017

A review of environmental impacts of winter road maintenance

2019

Abstract The need for winter road maintenance (WRM) is changing in cold regions due to climate change. How the different modes of WRM will contribute to future overall emissions from infrastructure is therefore of great interest to road owners with a view to a more sustainable, low-carbon future. In the quest for near-zero-emissions transport, all aspects of the transport sector need to be accounted for in the search for possible mitigation of emissions. This study used 35 peer-reviewed articles published between 2000 and 2018 to map available information on the environmental impacts and effect of WRM and reveal any research gaps. The articles were categorized according to their research th…

Modelling and Analysis of Flow Rate and Pressure Head in Pipelines

2019

Currently, various approaches with several utilities are proposed to identify damage in the pipeline. The pipeline system is modeled in the form of a distributed parameter system, such that the state space related to the distributed parameter system contains infinite dimension. In this paper, a novel technique is proposed to analyze and model the flow in the pipeline. Important theorems are proposed for testing the observability as well as controllability of the proposed model.

Comparing flow resistance law for fixed and mobile bed rills

2019

Rills caused by run-off concentration on erodible hillslopes have very irregular profiles and cross-section shapes. Rill erosion directly depends on the hydraulics of flow in the rills, which may differ greatly from hydraulics of flow in larger and regular channels. In this paper, a recently theoretically deduced rill flow resistance equation, based on a power–velocity profile, was tested experimentally on plots of varying slopes (ranging from 9% to 26%) in which mobile and fixed bed rills were incised. Initially, measurements of flow velocity, water depth, cross-section area, wetted perimeter, and bed slope, carried out in 320 reaches of mobile bed rills and in 165 reaches of fixed rills, …

Plio-Pleistocene Dust Traps on Paleokarst Surfaces: A Case Study From the Carpathian Basin

2020

Plio-Pleistocene silt/clay-rich deposits and paleo-karst fissure sediments from sites of the northern and southern parts of the Carpathian Basin were investigated. These materials were supposed to be mixed during transport before being captured in karstified fissures. Evidence that the eolian fissure sediments of Plio-Pleistocene age in the older Triassic–Cretaceous limestones are derived from eolian silt and clay includes compositional and textural matches, especially decreasing grain-size trends observed downwards from the paleo-surface of the former landscape. Various environmental factors could be recognized by the statistical evaluation of grain-size distribution curves of fissure fill…

Testing Sediment Connectivity at the Experimental SPA2 Basin, Sicily (Italy)

2017

The concept of sediment delivery can be used as a measure of sediment connectivity, and it can be linked to the structural connectivity (morphological unit, slope length, slope steepness, travel time) of a basin and to the hydrological connectivity (rainfall–runoff processes at morphological unit scale). In this paper, the sediment connectivity concept was tested at basin scale applying SEdiment Delivery Distributed model, which takes into account the hillslope sediment transport, and using sediment yield measurements carried out at SPA2 experimental basin (Sicily, Italy). For the SPA2 basin discretized into morphological units, the SEdiment Delivery Distributed model was first calibrated a…

Stage–Discharge Relationship for an Upstream Inclined Grid with Transversal Bars

2016

AbstractCheck dams with grids upgrading upstream are often used in mountain rivers, where intense sediment transport and steep slopes occur. In some cases, sloping grids are used in the construction of debris flow breakers. In this paper, the outflow process of an upstream-inclined grid with transversal bars is studied by using the dimensional analysis and the incomplete self-similarity theory. Next, the theoretical analysis shows that a power equation can be used for establishing the stage-discharge equation. The coefficient of the power equation depends on both the slope angle and the void ratio, whereas the exponent depends only on the slope angle. Finally, this deduced stage–discharge r…