Search results for "tribocorrosion"
showing 5 items of 5 documents
The corrosion and tribocorrosion resistance of PEO composite coatings containing α-Al2O3 particles on 7075 Al alloy
2018
Abstract Plasma electrolytic oxidation (PEO) of 7075 Al alloy was carried out in silicate base electrolyte containing 200 nm diameter α-Al2O3 particles for producing composite coatings. The process was performed under a soft-sparking regime using a pulsed bipolar signal with several concentrations of α-Al2O3 particles. It was found that the incorporation of α-Al2O3 particles into the coating did not significantly alter the thickness and roughness of the coating. However, the α-Al2O3 particles were detected on surface of the composite coatings. Corrosion tests showed significant improvement in corrosion performance of the composite coatings due to the efficient pore blocking provided by α-Al…
Electrochemically-induced TiO2 incorporation for enhancing corrosion and tribocorrosion resistance of PEO coating on 7075 Al alloy
2018
Abstract 7075 Al alloy was PEO-treated in a silicate based electrolyte containing 3 g l-1 potassium titanyl oxalate using unipolar and bipolar pulsed current waveforms. The coating formed by the bipolar waveform with the wider cathodic pulses showed volcano-like surface morphology with no evidence of large pores at the metal/coating interface. It revealed the highest corrosion performance due to the synergistic effect of TiO2 incorporation and structural/morphological features along with a better passivation behavior indicating no pitting susceptibility. For this coating, the tribocorrosion tests showed no potential drop during sliding under 1 N with the lowest volume loss of 0.022 mm3.
Stress/strain effects on electrochemical activity: Metallurgical/mechanical/interactions and surface reactivity
2021
Abstract Tribocorrosion is of complex nature as it involves multiscale interactions between mechanical, (electro-)chemical, physical, and material factors. The influence of mechanical stresses/strains on the surface reactivity of metallic alloys is described here. The electrochemical behavior and the corrosion resistance of engineering alloys are discussed in the presence of compressive and tensile stresses through different examples. The role of physical (formation of steps, roughness, microcracks), metallurgical (dislocations, crystallographic texture, and grain size), and chemical (passive film composition) changes induced by plastic deformation on electrochemical behavior and corrosion …
The use of the Pearson’s correlation coefficients to identify mechanical-physical-chemical parameters controlling the tribocorrosion of metallic alloy
2021
Abstract Tribocorrosion is of complex nature as it involves multiscale interactions between mechanical, (electro-)chemical, physical, and material factors. A methodology based on the use of the Pearson’s correlation matrix and local techniques is described here to analyze interactions between these factors. The most influent experimental parameters selected for tribocorrosion tests on the surface/subsurface characteristics and on the corrosion parameters are identified. Correlations between surface/subsurface and corrosion parameters are also analyzed to propose criteria and to understand basic mechanisms of tribocorrosion. This methodology is particularly useful in the case of multiphase m…
Synergistic effect of W incorporation and pulsed current mode on wear and tribocorrosion resistance of coatings grown by plasma electrolytic oxidatio…
2019
Ceramic coatings were grown by plasma electrolytic oxidation on 7075 Al alloy using unipolar and bipolar pulsed current waveforms with 20 and 40% cathodic duty cycles, from a silicate-based bath without and with the addition of Na2WO4. Pancake-like morphology was dominant on the coatings grown by unipolar waveform, while the bipolar waveforms promoted volcano-like morphology, increased the roughness of the coating surface and the formation of more compact layers. The coatings produced using the bipolar waveforms provided higher resistances toward both tribocorrosion and dry sliding conditions, while further improvement was achieved by the presence of tungsten. The coatings produced in tungs…