Search results for "turbine"
showing 10 items of 198 documents
Parametric Models for Predicting the Performance of Wind Turbines
2020
Abstract Performances of eight parametric power curve models for wind turbines, which can be used for the planning and management of wind energy projects, are compared in this study. Initially, the manufacturer’s power curves of four wind turbines are compared with their field performances. Then, the parametric models are developed for these turbines which are tested with their site performances. Out of the models, WERA showed the best performance in case of all the turbines. Finally, a method for using WERA in extrapolating the performance of turbines with limited test data is demonstrated with the case of a 1 kW turbine.
Migratory passage structures at hydropower plants as potential physiological and behavioural selective agents
2019
Anthropogenic activities affect fish populations worldwide. River dams have profound impacts on ecosystems by changing habitats and hindering migration. In an effort to counteract such effects, a range of mitigation measures have been installed at hydroelectric power plants. However, not all individuals in a population use these measures, potentially creating strong selection processes at hydroelectric power plants. This may be especially true during migration; fish can get heavily delayed or pass through a hydropower turbine, thus facing increased mortality compared with those using a safe bypass route. In this study, we quantify migration route choices of descending wild passive integrate…
Vertical wind turbine with self-limitation system of speed
2018
Multi-Component Fault Detection in Wind Turbine Pitch Systems Using Extended Park's Vector and Deep Autoencoder Feature Learning
2018
Pitch systems are among the wind turbine components with most frequent failures. This article presents a multicomponent fault detection for induction motors and planetary gearboxes of the electric pitch drives using only the three-phase motor line currents. A deep autoencoder is used to extract features from the extended Park's vector modulus of the motor three-phase currents and a support vector machine to classify faults. The methodology is validated in a laboratory setup of a scaled pitch drive, with four commonly occurring faults, namely, the motor stator turns fault, broken rotor bars fault, planetary gearbox bearing fault and planet gear faults, under varying load and speed conditions.
A review of diagnostics and prognostics of low-speed machinery towards wind turbine farm-level health management
2016
Abstract Large wind farms are gaining prominence due to increasing dependence on renewable energy. In order to operate these wind farms reliably and efficiently, advanced maintenance strategies such as condition based maintenance are necessary. However, wind turbines pose unique challenges in terms of irregular load patterns, intermittent operation and harsh weather conditions, which have deterring effects on life of rotating machinery. This paper reviews the state-of-the-art in the area of diagnostics and prognostics pertaining to two critical failure prone components of wind turbines, namely, low-speed bearings and planetary gearboxes. The survey evaluates those methods that are applicabl…
Direct Torque Control of a Small Wind Turbine with a Sliding-Mode Speed Controller
2016
In this paper. the method of direct torque control in the presence of a sliding-mode speed controller is proposed for a small wind turbine being used in water heating applications. This concept and control system design can be expanded to grid connected or off-grid applications. Direct torque control of electrical machines has shown several advantages including very fast dynamics torque control over field-oriented control. Moreover. the torque and flux controllers in the direct torque control algorithms are based on hvsteretic controllers which are nonlinear. In the presence of a sliding-mode speed control. a nonlinear control system can be constructed which is matched for AC/DC conversion …
Design of a telescopic tower for wind energy production with reduced environmental impact
2019
A prototype of a telescopic pole for wind energy production with low environmental impact and its lifting system for a 60 to 250 kW turbine and a height of 30 m have been designed and manufactured. A telescopic tower, which is raised and lowered by automation or by remote control, allows to differentiate the presence of the generator within the landscape over time. The technology currently available for lifting and lowering wind turbines is made up of telescopic poles of heights of less than 10 meters and with tilting posts of height below 30 m. Without a state of the art to refer to, the telescopic pole and its lifting system have been designed starting from scratch and solving with innova…
Performance Study of Twisted Darrieus Hydrokinetic Turbine With Novel Blade Design
2021
Abstract Twisted Darrieus water turbine is receiving growing attention for small-scale hydropower generation. Accordingly, the need for raised water energy conversion incentivizes researchers to focus on the blade shape optimization of twisted Darrieus turbine. In view of this, experimental analysis has been performed to appraise the efficiency of a spiral Darrieus water rotor in the present work. To better the performance parameters of the studied water rotor with twisted blades, three novel blade shapes, namely U-shaped blade, V-shaped blade, and W-shaped blade, have been numerically tested using a computational fluid dynamics three-dimensional numerical model. The maximum power coefficie…
EXTERNAL RECIRCULATION IN PRS TYPE TURBINE: EXPERIMENTAL AND NUMERICAL RESULTS.
2022
Cavitation is a relevant phenomenon for structural safety and noise level in hydraulic turbines, occurring when water pressure falls below the vapor value at a given temperature. In this case bubbles of vapor grow inside the liquid and move along with it. When the pressure returns above the vapor value the bubble collapses, and the pressure can locally achieve very high values, up to 7000 bars (Kumar & Saini, 2010). Moreover, if the bubble was confined also by the solid wall of a blade, the solid particles suspended in the fluid can be transported by the fluid ones and hit the solid wall at very high velocity, generating erosion. Cavitation is also the source of high frequency noise, ve…
Leading edge erosion of wind turbine blades: Effects of blade surface curvature on rain droplet impingement kinematics
2020
Abstract The issue of leading edge erosion (LEE) of wind turbine blades (WTBs) is a complex problem that reduces the aerodynamic efficiency of blades, and affects the overall cost of energy. Several research efforts are being made at the moment to counter erosion of WTBs such as-testing of advanced coating materials together with development of high-fidelity computational models. However, the majority of these studies assume the coated surfaces as flat, while the surface curvature and the shape of the aerofoil at the blade’s leading-edge exposed to such rain fields is neglected. The present study questions the assumption of a flat surface, in the context of LEE of WTBs, and provides guideli…