Search results for "vector"

Adaptation of two-state (binary) optical fibre loop sensors for industrial use

2005

The paper presents an attempt to unify the construction of two state optical fibre loop sensor and possibility of adapting it to the various traditional constructions and casings of industrial sensors. This enables module structure of sensors based on construction of industrial application (master) and mensurative optical fibre loop (slave). Mensurative properties are determined by traditional (mainly mechanical) measuring system ex. temperature, displacement, and optical properties are determined by characteristics of auxiliary optical system (standardised and unified). Such attitude to a subject is illustrated in this paper by the examples of threshold displacement sensor, temperature, vo…

Passive-damping design for vibration control of large structures

2013

In this work, a systematic strategy to design passive damping systems for structural vibration control is presented. The proposed design methodology is based on the equivalence between decentralized static velocity-feedback controllers and passive damping systems. By using recent developments in static output-feedback control, the design of passivedamping systems can be formulated as a single optimization problem with Linear Matrix Inequality constraints. Moreover, this optimization problem can be efficiently solved with standard numerical tools, even for large dimension systems. Due to its computational effectiveness, the proposed methodology can be applied to the design of passive damping…

2014

A 3D imaging technique using a high speed binocular stereovision system was developed in combination with corresponding image processing algorithms for accurate determination of the parameters of particles leaving the spinning disks of centrifugal fertilizer spreaders. Validation of the stereo-matching algorithm using a virtual 3D stereovision simulator indicated an error of less than 2 pixels for 90% of the particles. The setup was validated using the cylindrical spread pattern of an experimental spreader. A 2D correlation coefficient of 90% and a Relative Error of 27% was found between the experimental results and the (simulated) spread pattern obtained with the developed setup. In combin…

Prediction of flow fields in a dual-impeller stirred vessel

1999

Numerical simulations were connected for the flow field in a baffled tank stirred by a dual Rushton impeller. For this geometry, LDV measurements show a characteristic dependence of the flow patterns upon the position of the impellers. Two advanced modeling approaches were tested. In the first, the vessel was divided info two concentric blocks, coupled by, a sliding grin technique, and simulations were conducted in time-dependent mode. In the second approach, the vessel was modeled as two partially over-lapping I regions, the inner one rotating with the impeller and rite outer one stationary simulations were run in steady-state mode for each of the two regions, while information was iterati…

PMSM Drives Sensorless Position Control with Signal Injection and Neural Filtering

2009

Vector Field Oriented Control (FOC) is one of the best control methods for high-dynamic electrical drives. To avoid the adoption of the speed/position sensor (resolver/encoder), a sensorless technique should be used. Among the various sensorless methods in literature, those based on machine saliency detection by signal injection seem to be most useful for thier giving the possibility of closing the position control loop. This paper proposes a method for enhancing both rotating and pulsating voltage carrier injection methods by a neural adaptive band filter. Results show the goodness of the proposed solution.

Controlled Fault-Tolerant Power Converters for Power Quality Enhancement

2013

Power quality depends generally on the interaction of electrical power with electrical equipments. If electrical equipments operate correctly and reliably without being damaged or stressed, a suitable level of power quality is assured. On the other hand, if the electrical equipment malfunctions, is unreliable, or is damaged during normal usage, power quality is poor and probably the economical loss could be important like the technical one. In the scenario of the Distributed Generation, power quality issues will be moreover important because an higher dissemination of power conditioning equipment will be requested and this obviously increases the sources of vulnerability of the electrical s…

Sensorless control of PMSM by a linear neural network: TLS EXIN neuron

2010

Sensorless vector control applied to the Permanent Magnet Synchronous Motors (PMSMs) is a very challenging subject. It permits obtaining high dinamical performance by exploiting increased reliability and also reduced cost. Among the different methodologies proposed in literature, a model based approach has been proposed here. In particular, the space vector equations of the PMSM have been re-elaborated to permit the use of a Least Squares technique. The problem has been then faced-up to with the so-called TLS EXIN neuron, which is a linear neural network able to solve the TLS problem on-line. Simulation tests have been done on both interior mounted and surface mounted machines.

Control of an open-end winding induction machine via a two-output indirect matrix converter

2014

In this paper an Indirect Matrix Converter (IMC) with two output stages feeding an open-end winding induction machine is presented. The IMC has the advantage of having nobulky energy storage elements and with the two output stages up to 1.5 times the input phase voltage can be obtained across the windings of the machine, without overmodulation. A vector control scheme for the machine currents is used along with a modulation strategy for the converter two-output stages to reduce the common mode voltage and compensate the phase zero sequence currents. Simulation results showing the performance of the controlscheme and the reduction of zero sequence and common mode voltages are presented and d…

Method for designing PI-type fuzzy controllers for induction motor drives

2001

The paper illustrates a new systematic method for designing PI-type fuzzy controllers for direct field-oriented controlled induction motor drives. First, linear and decoupled models expressing the dynamics of speed, rotor flux, direct and inquadrature stator currents are derived using a nonlinear static compensator and choosing convenient input variables. Then, to guide the dynamics of the above quantities, four conventional PI controllers are designed independently, choosing their bandwidths conveniently. Finally, the input and output scale factors of PI-type fuzzy controllers are derived from the conventional PI controller parameters. The whole drive controller also includes a rotor flux …

Expected principal stress directions under multiaxial random loading. Part II: Numerical simulation and experimental assessment through the weight fu…

1999

In Part I of the present work, the theoretical aspects of a proposed procedure to determine the expected principal stress directions under multiaxial random loading have been discussed. This procedure consists of averaging the instantaneous values of the three Euler angles through weight functions. In Part II here, a numerical simulation is presented to illustrate the above theoretical method. As an example, the algorithm proposed is applied to some experimental biaxial in- and out-of-phase stress states to assess the correlation between the expected principal stress directions and the position of the experimental fatigue fracture plane for such tests.