Search results for "vinyl acetate"
showing 10 items of 48 documents
Calcium phosphate/polyvinyl acetate coatings on SS304 via galvanic co-deposition for orthopedic implant applications
2021
Abstract In this work, the galvanic deposition method is used to deposit coatings of brushite/hydroxyapatite/polyvinyl acetate on 304 stainless steel. Coatings are obtained at different temperatures and with different sacrificial anodes, consisting of a mixture of brushite and hydroxyapatite. Samples are aged in a simulated body fluid (SBF), where a complete conversion of brushite into hydroxyapatite with a simultaneous change in morphology and wettability occurred. The corrosion tests show that, compared with bare 304, the coating shifts Ecorr to anodic values and reduces icorr Ecorr, and icorr has different values at different aging times due to chemical interactions at the solid/liquid i…
Aluminium oxide — Poly(vinyl acetate) composite electrolyte for electrochromic devices
1997
This report describes composite proton electrolytes composed of nanosize activated aluminium oxide particles with different surface acidity suspended in a poly(vinyl acetate)/glycerine matrix. The conductivity of the composite was found to increase by going from basic to neutral to acidic aluminium oxide. Tests in laminated electrochromic devices with tungsten oxide and nickel hydroxide films showed that the acidic electrolyte is compatible with WO3, the basic electrolyte is compatible with Ni(OH)2, and the neutral electrolyte is compatible with both of the electrodes.
Proton-conducting zirconium phosphate/poly(vinyl acetate)/glycerine gel electrolytes
2003
This work reports on a proton gel electrolyte composed of zirconium phosphate (ZP) particles suspended in a poly(vinyl acetate)/glycerine matrix. The material was studied by X-ray powder diffraction, differential scanning calorimetry, impedance spectroscopy, and spectrophotometry. It had a proton conductivity of 1–0.1 mS/cm at room temperature and remained stable and transparent up to at least 110 °C; it therefore appears suitable for uses in electrochromic devices. The structure of the ZP powder and of the gel is discussed in terms of water removal from interplanar spaces by heating or exfoliation. It is suggested that an exfoliation of the layered structure of ZP by intercalation of glyce…
The role of organoclay and matrix type in photo-oxidation of polyolefin/clay nanocomposite films
2009
Abstract In this paper the photo-oxidation behaviour of polyolefin/clay nanocomposite films was studied; in particular, the effect of the amount of organo-modifier and the matrix polarity on the photo-oxidation was investigated. Two different organo-modified clays and compositions of LDPE/EVA blend films were used and the photo-oxidation was followed by mechanical and spectroscopic analyses. The organoclay and matrix type strongly influence the photo-oxidative behaviour of nanocomposite films. The films filled with CL15A show a faster loss of mechanical performance and higher carbonyl formation with respect to the films filled with the CL20A. Additionally, the LDPE based nanocomposite under…
Recycled Polycarbonate Based Nanocomposites
2013
Post-consumer polycarbonate (RPC) blends with various amounts (5, 10, 30 wt. %) of ethylene vinyl acetate copolymer (EVAc) are investigated as potential nanocomposite matrices. At EVAc weight content of 10 wt.% maximum tensile strength σM and impact strength AI increase is observed in comparison to neat RPC. Addition of EVAc, however, reduces resistance to creep as well as decrease thermal stability of the investigated compositions. Addition of montmorillonite nanoclay (MMT), however, allows increase modulus of elasticity E and yield strength σY of the investigated RPC blend with 10 wt. % of EVAc. Besides it creep resistance and thermal resistance of the investigated system is increased to …
Evolution of the morphology and characterzation of compatibilized PBT/EVA blends prepared by reactive extrusion
2006
In this work, the possibility of preparing compatibilized blends of poly(butylene terephthalate) (PBT) and an ethylene vinyl acetate (EVA) copolymer by reactive extrusion in the presence of an ethylene acrylic acid copolymer (EAA) and a bisoxazoline compound (PBO) as compatibilization promoters has been studied. In addition, the evolution of the morphology of the blends under different annealing conditions in the presence and absence of the compatibilizing promoters has been studied. Binary blends of PBT and EVA showed behavior typical of incompatible blends with a gross morphology and bad mechanical performance. The situation was however different for ternary PBT/EVA/EAA and especially for…
Recycled Polycarbonate Blend as Matrix for Development of Polymer Nanocomposite
2012
Summary: Secondary polycarbonate (SPC) is modified with various amounts (5, 10, 30 wt%) of ethylene vinyl acetate copolymer (EVAc) in order to reduce its brittleness. It is observed that at optimal EVAc weight content maximum tensile strength σM and impact strength AI increse by 14% (ωEVAc = 5 wt%) and 450% (ωEVAc = 10 wt%) in comparison to neat SPC, respectively. Addition of montmorillonite nanoclay (MMT) allowed further increase of elastic modulus E, strength and creep resistance of the investigated SPC blend with 10 wt% of EVAc.
Photo-oxidative degradation of poly(ethylene-co-vinyl acetate)/nisin antimicrobial films
2012
The photo-oxidative behaviour of different antimicrobial blown films based on poly (ethylene-co-vinyl acetate) (EVA) was studied. In particular, two samples of EVA containing different level of vinyl acetate comonomer (namely 14% and 28%) were used as matrices while nisin at different concentrations was used as antimicrobial agent. The degradation was followed by analyzing the changes in the spectroscopic behaviour and of the elongation at break measured in tensile tests. Moreover, changes in the antimicrobial activity of the films were followed by measuring the inhibition halo in agar diffusion tests. The results indicate that nisin acts as an excellent UV stabilizer for both samples of EV…
EVA-montmorillonite nanocomposites: effect of processing condition
2004
The aim of this study is to examine the effect of the compounding apparatus and of processing conditions on the properties of an organoclay-poly[ethylene-co-(vinyl acetate)] (EVA) nanocomposite. The filled materials were prepared using either a discontinuous batch mixer, a single screw extruder, a counter rotating intermeshing twin-screw compounder or a corotating intermeshing twin-screw extruder. The characterization of the obtained nanocomposites was performed by XRD, thermogravimetry, mechanical and rheological measurements. The study has shown the possibility of producing nanocomposites based on EVA and a commercial organoclay (Cloisite 15A) by several mixing equipments. In fact all the…
Stability of parenteral nutrition admixtures containing organic phosphates
1995
The use of organic phosphates to avoid calcium phosphate precipitation in parenteral nutrition mixtures has been proposed. The purpose of this study was to evaluate the stability of total parenteral nutrition admixtures containing glucose-1-phosphate or glycerol phosphate as the phosphate source over 3 days. Three parenteral nutrition admixtures, each containing glucose-1-phosphate (30.0 mmol), glycerol phosphate (31.4 mmol) or inorganic phosphate (30.0 mmol), and their corresponding aqueous phases were prepared in 3-L ethylene vinyl acetate plastic bags and infusion bottles, and stored at 5 +/- 1 degrees C or 22 +/- 3 degrees C without light protection. Physical stability analysis and samp…