Search results for "visual_art"
showing 10 items of 2987 documents
Synthesis of a polystyrene-arm-polybutadiene-arm-poly(methyl methacrylate) triarm star copolymer
1996
The straightforward synthesis of a polystyrene-arm-polybutadiene-arm-poly(methyl methacrylate) triarm star copolymer has been successfully realized by a sequence of reactions which involves the sequential addition of a living polybutadienyllithium to a polystyrene macromonomer with a terminal 1,1-diphenylethylene unit and subsequent polymerization of methyl methacrylate. The high-molecular-weight polystyrene-arm-polybutadiene-arm-poly(methyl methacrylate) star copolymer shows microphase separation into three phases.
Effect of CTBN rubber inclusions on the curing kinetic of DGEBA–DGEBF epoxy resin
2003
Abstract The curing kinetics of an epoxy resin matrix, based on diglycil ether of bisphenol A and F (DGEBA–DGEBF), associated with an anhydride hardener, at different carboxyl-terminated copolymer of butadiene and acrylonitrile liquid rubber (CTBN) concentration (0–10 phr) are studied using a differential scanning calorimetry (DSC) and a stress-controlled rheometer in isothermal and dynamic conditions. The aim of this work is to correlate the presence of the rubber phase with the transition phenomena that occur during the curing process. The CTBN rubber induces a catalytic effect on the polymerization of the pure resin clearly observed by a significant enhancement of the curing rate. Calori…
Recycled Polycarbonate Blend as Matrix for Development of Polymer Nanocomposite
2012
Summary: Secondary polycarbonate (SPC) is modified with various amounts (5, 10, 30 wt%) of ethylene vinyl acetate copolymer (EVAc) in order to reduce its brittleness. It is observed that at optimal EVAc weight content maximum tensile strength σM and impact strength AI increse by 14% (ωEVAc = 5 wt%) and 450% (ωEVAc = 10 wt%) in comparison to neat SPC, respectively. Addition of montmorillonite nanoclay (MMT) allowed further increase of elastic modulus E, strength and creep resistance of the investigated SPC blend with 10 wt% of EVAc.
Viscoelastic behavior of epoxy prepolymer/organophilic montmorillonite dispersions
2008
Dispersions of a bisphenol A-based epoxy resin with an organophilic montmorillonite (Nanofil 919) were studied by X-ray diffraction and oscillatory shear rheometry. X-ray studies reveal that the clay is intercalated by the epoxy and forms stable dispersions. The viscoelastic behavior of the nanodispersions was measured as a function of the Nanofil concentration and temperature. An increase in both G′ and G″ moduli was detected as the concentration increases. Furthermore, a transition from a liquid-like behavior, at low temperatures, to a solid-like behavior, at higher temperatures, was observed for all the samples. This transition is accounted for the formation of a percolated structure of …
A new method of nanocrystalline nickel powder formation by magnetron sputtering on the water-soluble substrates
2018
Due to the accurate and relatively easy control magnetron sputtering is an attractive technique for the synthesis of metallic particles. This work describes a new method of nickel powder production by depositing nickel on the surface of sodium chloride particles which were used as the template and are soluble in water. Ni powder with flake-like structure was obtained after washing Ni coated salt particles in ultrasonic cleaner. Salt particles and nickel powder were characterized using scanning electron microscope (SEM), energy-dispersive x-ray spectrometer, XRD and X-ray photoelectron spectroscopy (XPS) techniques. SEM images showed that thickness of the received Ni particles varied in the …
Structure and thermodynamics in polymer blends. Neutron scattering measurements on blends of poly(methyl methacrylate) and poly(styrene-co-acrylonitr…
1992
Abstract Neutron scattering on polymer blends of deutero-poly(methyl methacrylate) (D-PMMA) and poly(styrene-co-acrylonitrile) with 19 wt% acrylonitrile (PSAN-19) exhibits excess scattering for scattering vectors Q≲0.2 nm−1 if the volume fraction of D-PMMA is less than 0.5 and greater than 0.05. The range of occurrence and the amount of excess scattering depends to a certain degree on the procedure of sample preparation. If the excess scattering is eliminated by linear extrapolation from large to small Q in the Zimm representation, the residual scattering intensity in the small and intermediate Q-range can be interpreted by the mean field approach of de Gennes with a concentration-dependent…
Compressive recovery behaviour of a polycarbonate
1978
Abstract Polycarbonate samples were subjected to large compression strains (beyond yielding) and were unloaded after some degree of stress relaxation. The subsequent deformation recovery was measured for several values of strain, loading rate and duration of stress relaxation. All the data could be reported as a single curve by normalizing the recovered strain with the stress at the end of the relaxation period.
Poisson's ratio and the incompressibility relation for various strain measures with the example of a silica-filled SBR rubber in uniaxial tension tes…
2010
Abstract The controversy in the definition of Poisson's ratio (PR) as a material constant is discussed in this study. PR of an isotropic material is usually defined as the ratio, taken with the opposite sign, between its lateral and longitudinal strains under the action of longitudinal stresses. However, if deformations of the material are large, the value of PR depends on the strain measure used. Five different measures of strain are considered, and a unified relation in terms of stretch ratios is obtained for calculating the PR. It is demonstrated that only for Hencky strains is the value of PR of an incompressible material constant and equal to 0.5 over its entire extension range. Other …
Drop weight tensile impact testing of adhesively bonded carbon/epoxy laminate joints
2012
Abstract Crashworthiness of composite structures is a key issue for the design of lightweight vehicles. In particular the joined parts of the structures must be able to absorb a high amount of energy in order to protect the passengers. In this paper the dynamic behavior of adhesively bonded carbon/epoxy laminate joints is investigated. The adherends are made of unidirectional plies, whose orientations are carefully chosen in order to assess the influence of the adherend mechanical properties on the joint behavior. A drop weight machine has been modified in order to impact specimens under tension. Single lap joints are tested under impact tension at velocities from 1 to 4 m/s. Results of the…
Study and comparison of interaction parameters and phase behavior of epoxy/polystyrene and epoxies copolymer polystyrene-b-poly(methyl methacrylate) …
2008
Thermodynamic studies in terms of phase separation behavior and interaction parameters, in mixtures of epoxy resins (thermoset materials) with thermoplastic additives, consisting of polystyrene (PS) or polystyrene-b-poly(methyl methacrylate) P(S-MMA) (with small proportion of MMA), have been carried out. It can be confirmed that the solubility of P(S-MMA) is an improvement on that of PS, with the prepolymer epoxy resins. Moreover, the interaction parameters are positive at temperatures in which phase separation is observed, but negative at temperatures in which the phase separation window disappears, in the corresponding phase diagram. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engine…