Search results for "visual_art"
showing 10 items of 2987 documents
LOAD SUPPORT OF FRC CYLINDERS UNDER COMPRESSION
2000
ABSTRACT The purpose of this research is to look for the optimum structure applied FRC for load support by considering the biomimetic design. For example, cortical bone is made of FRC structures for load support in living bones. Making a start of analysis, the osteon being an structural unit of cortical bone was modelled in filament-wound (FW) cylinder. The first approximation of cortical bone was represented by the densest arrangement of the cylinders to focus on compressive behaviour of osteons. E-glass/epoxy cylinders were applied to specimens. Static compression tests were carried out to evaluate these models. On the osteon model, the smaller ply angle to the longitudinal direction gave…
Electrical connections and driving electronics for piezo-actuated x-ray thin glass optics
2016
Use of thin glass modular optics is a technology currently under study to build light, low cost, large area X-ray telescopes for high energy astrophysics space missions. The angular resolution of such telescopes is limited by local deviations from the ideal shape of the mirrors. One possible strategy to improve it consists in actively correcting the mirror profile by gluing thin ceramic piezo-electric actuators on the back of the glasses. A large number of actuators, however, requires several electrical connections to drive them with the different needed voltages. We have developed a process for depositing conductive paths directly on the back of non-planar thin foil mirrors by means of a p…
Optimizing geometry of low-Q all-metal Fabry-Pérot microcavity for fluorescence spectroscopy
2021
Abstract Fluorescence spectroscopy is commonly employed to study the excited-state photophysics of organic molecules. Planar Fabry-Pérot microcavities play an essential role in such studies and a strategic cavity design is necessary to attain an enhanced light-matter interaction. In this work, we computationally study different geometries for a planar metallic Fabry-Pérot microcavity tuned for the absorption of Sulforhodamine 101, a typical dye for fluorescence spectroscopy. The cavity consists of a polymer layer enclosed between two silver mirrors, where the thicknesses of all the three layers are varied to optimize the cavity. Our transfer-matrix and finite-difference time-domain simulati…
The structure of PLZT ceramics and holographic recording
1992
Abstract The influence of the specific structure of transparent PLZT X/65/35 [Pb1-xLax (Zr.65Ti.35)1-x/4O3] ceramics with x = 8.5% and IO% on photorefraction and peculiarities of holographic recording have been studied.
Does mechanical locking-base ceramic brackets reduce cracks at debonding?
2012
Objectives: Debonding of chemically bonded ceramic brackets has been mostly led to enamel damages. This study aimed to evaluate enamel cracks followed by debonding ceramic brackets with mechanical retention. Study Design: Sixty extracted human premolar teeth were randomly divided into two groups. Metallic brackets and recently available ceramic brackets with mechanical retention were bonded to the teeth in first (MB) and second (CB) group respectively. After a week, the brackets were debonded using a pair of bracket-removing pliers assembled to a testing machine. Optical stereomicroscope and trans-illumination techniques were used to calculate the cracks and measure their length before bond…
Biomimetic transformation of polyphosphate microparticles during restoration of damaged teeth.
2019
Abstract Objective In the present study, we investigated the fusion process between amorphous microparticles of the calcium salt of the physiological polymer comprising orthophosphate units, of inorganic polyphosphate (polyP), and enamel. Methods This polymer was incorporated as an ingredient into toothpaste and the fusion process was studied by electron microscopy and by synchrotron-based X-ray tomography microscopy (SRXTM) techniques. Results The data showed that toothpaste, supplemented with the amorphous Ca-polyP microparticles (aCa-polyP-MP), not only reseals tooth defects on enamel, like carious lesions, and dentin, including exposed dentinal tubules, but also has the potential to ind…
The Influence of Ageing on the Impact Damage of Carbon Epoxy Composites
2011
Abstract This study looks into the influence of ageing on the carbon epoxy composite when impact is applied. Three different stacking sequences were investigated, one sequence with the classic lay-up, whereas the other two have quasi-isotropic and quasi-homogeneous behaviour. The specimens were aged up to 2100 h (3 months) in a climatic chamber with a temperature of 70 °C and relative humidity of 85%. The mass was measured regularly during the hygrothermal ageing treatment. The mass was always measured directly after exiting the climatic chamber and it was noted that for each stacking sequence, the same regular increase in mass is observed until stabilisation. The specimens were then impact…
Ceramic Raw Materials
2016
Any ceramic object represents the result of a well-structured production chain starting with the localization and the exploitation of a suitable raw material and ending with the artisanship and craftsmanship of the potter. The study of ceramic raw materials has been increasingly regarded in archaeometric research as the best starting point for identifying local paste recipes for pottery diachronically produced in any historical period. The classification of a ceramic paste and its assignment to a production center can be established more easily when ceramic sherds, kiln wasters, and raw material are studied in combination. The reconstruction of the “production chain” should facilitate the s…
Characterisation of Apatites as Potential Uranium Reference Materials for Fission-track Dating by LA-ICP-MS
2015
We report homogeneity tests on large natural apatite crystals to evaluate their potential as U reference materials for apatite fission-track (AFT) thermochronology by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). The homogeneity tests include the measurements of major element concentrations by electron probe microanalysis (EPMA), whereas for U concentration, isotope dilution (ID) ICP-MS and laser ablation (LA) ICP-MS were employed. Two apatite crystals are potential reference materials for LA-ICP-MS analysis: a 1 cm3 fraction of a Durango crystal (7.5 μg g−1 U) and a 1 cm3 Mud Tank crystal (6.9 μg g−1 U). The relative standard deviation (1 RSD) of the U concentrat…
Effective electrical conductivity of carbon nanotube–epoxy nanocomposites
2016
The electrical conductivity of carbon nanotube–epoxy composites is investigated analytically and experimentally. The theoretical predictions of the effective electrical conductivity of carbon nanotube–epoxy composites were performed by the analytical approach based on a micromechanical model of composites. The parametric analysis carried out revealed an influence of geometrical and electrical parameters of the micromechanical model on the effective electrical conductivity of carbon nanotube–epoxy nanocomposite. The nanocomposites made from the DGEBA-based and RTM6 epoxy resins filled with different weight content of Baytubes C150P and N7000 multi-walled carbon nanotubes were prepared. The …