Search results for "visual_art"
showing 10 items of 2987 documents
In vitro experimental study of bonding between aluminium oxide ceramics and resin cements
2010
To evaluate bond strengths of different resin cements to two aluminum oxide-based ceramics. Methods: One hundred ten ceramic cylinders were produced and given four different surface treatments. Resin cement cylinders were then bonded to the ceramic cylinders using different resin cements and the bond strength was determined by shear testing to the breaking point. We were thus able to obtain results for the different combinations of porcelain, surface treatments and cements. All data was analyzed using the Kruskal-Wallis test for more than two independent samples and the Bonferroni correction applied (a=0.01). An optical microscopy study was carried out to analyze the type of failure, and an…
Bond strength of lithium disilicate after cleaning methods of the remaining hydrofluoric acid
2020
Background Complex implant treatments have steadily increased within implant prosthodontics. Based on the lower implant mobility, implant impressions need high accuracy in the model transfer to receive a high passive fit within the final prosthodontic restoration. To analyze the accurate 3-dimensional (3D) inter-implant-positions, a reference point is indispensable. However, there is no reference in the patients mouth, so the aim of the present study was to develop a new method based on a custom-made-measuring-aid (CMA) to assess the inter implant dimensions (InID) in patients. Material and Methods Initially an implant master model (IMM/patient equivalent) was digitized by computed tomograp…
Impact of Thermal Treatment on the Surface of Na0.5Bi0.5TiO3-Based Ceramics
2021
This research was funded by the European Regional Development Fund, grant number 1.1.1.2/VIAA/3/19/558. The Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme, grant number 739508.
Distinctive features of diffusion-controlled radiation defect recombination in stoichiometric magnesium aluminate spinel single crystals and transpar…
2020
This work has been performed within the framework of the EUROfusion Enabling Research project: ENR-MFE19.ISSP-UL-02 “Advanced experimental and theoretical analysis of defect evolution and structural disordering in optical and dielectric materials for fusion application”. The views and opinions expressed herein do not necessarily reflect those of the European Commission. Research of A.L, E.F.,, V.S and E.S has been partly supported by the Estonian Research Council grant (PUT PRG619); has been also carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under grant agreement No 633053. The …
Aluminium nitrate ceramics: a potential UV dosemeter material.
2002
The ceramic material AlN-Y 2 O 3 is proposed as a potential ultraviolet radiation (UVR) dosemeter using optically stimulated luminescence (OSL) and thermally stimulated luminescence (TL). Experimental studies have shown that AlN ceramics exhibit attractive characteristics suitable for practical UV dosimetry applications. The features are: (1) the spectral sensitivity covers the 200-350 nm range, in the UV-B region it is similar to that of human skin; (2) the angular dependence of the incident radiation follows the cosine law; (3) high yields of both UVR-induced OSL and TL signals compared to those of Al 2 O 3 :C; and (4) a large dynamic range TL signal (5 orders of magnitude). Although ther…
Discrimination and provenances of Phoenician red slip ware using both the solid state electrochemistry and petrographic analyses
2020
[EN] Solid state electrochemistry based on the voltammetry of immobilized microparticles (VIMP) methodology is applied to a series of 80 Phoenician Red Slip samples from the archaeological sites of Motya (Sicily, Italy), Mogador (Morocco), Ramat-Rahel (Israel), Sulky (Sardinia, Italy), Tas Silg (Malta), Pantelleria (Italy), and Cadiz (Spain), dated from the 8(th) to the 6(th) century BC. Upon attachment of sub-microsamples to graphite electrodes in contact with aqueous H2SO4 electrolyte, voltammetric features due to the reduction of Fe(III) minerals and the oxidation of Fe(II) ones, complemented with electrocatalytic effects on oxygen reduction and oxygen evolution reactions, provide charac…
Resistance to bond degradation between dual-cure resin cements and pre-treated sintered CAD-CAM dental ceramics
2012
Objective: To evaluate the bond stability of resin cements when luted to glass-reinforced alumina and zirconia CAD/CAM dental ceramics. Study design: Eighteen glass-infiltrated alumina and eighteen densely sintered zirconia blocks were randomly conditioned as follows: Group 1: No treatment; Group 2: Sandblasting (125 µm Al2O3-particles); and Group 3: Silica-coating (50 µm silica-modified Al2O3-particles). Composite samples were randomly bonded to the pre-treated ceramic surfaces using different resin cements: Subgroup 1: Clearfil Esthetic Cement (CEC); Subgroup 2: RelyX Unicem (RXU); and Subgroup 3: Calibra (CAL). After 24 h, bonded specimens were cut into 1 ± 0.1 mm2 sticks. One-half of th…
Bond strength evaluation of the veneering-core ceramics bonds.
2009
The purpose of this study was to determine whether the bond of veneering porcelain to a ceramic core in bilayered ceramics was similar to that of the metal ceramic control of well known behaviour. Six groups of nine specimens each were fabricated, whose dimensions were 15 mm long and 8 mm in diameter at the core, and 2 mm long and 8 mm in diameter for the veneer. The groups were GR. 1 (control group): CrNi alloy/d.SIGN (Ivoclar), GR. 2: IPS e.maxPress/IPS e.maxCeram (Ivoclar), GR. 3: IPS e.maxZirCad/ IPS e.maxZirPress (Ivoclar), GR. 4: IPS e.maxZirCad/IPS e.maxCeram (Ivoclar), GR. 5: Lava Frame (3M ESPE)/ Lava Ceram (3M ESPE) and GR. 6: Lava Frame (3M ESPE)/IPS e.maxCeram (Ivoclar). A shear…
Microstructure and mechanical effects of spark plasma sintering in alumina monolithic ceramics
2013
The specific effects of spark plasma sintering (SPS) on the creep behavior, microstructure and mechanical properties of alumina monolithic ceramic were investigated. SPS introduces strains that concentrate at grain boundaries and inhibit crack growth, resulting in an improvement in the flexural strength and fracture toughness. However, creep blocks grain boundary movements and decreases the reliability of the material. These strains can be removed by a post-sintering thermal treatment, which plays an important role in the distribution of dislocations.
Full maxillary rehabilitation with an all-ceramic system
2009
With the appearance of all-ceramic systems, providing a choice of framework porcelains and allowing the same material to be used for the veneer, it is now possible to select the ideal structure in terms of both function and esthetics. Silicate ceramics allow porcelain laminate veneers and crowns to be used in the anterior region, providing excellent esthetics; while for the posterior area, where function takes precedence, oxide ceramics, specifically zirconium oxide, are preferred. The IPS e.max ceramic system, heir apparent to the IPS Empress 2 system, combines the advantages of zirconium oxide ceramics (IPS e.max Zircad) with the excellent esthetic qualities of silicate ceramics (IPS e.ma…