Search results for "zirconium"

Differential scanning calorimetry investigation of phase transition in $BaZr_{x}Ti_{1-x}O_{3}$

2009

ABSTRACT Lead-free BaZrxTi1-xO3 (x = 0; 0.025; 0.125) ceramics have been obtained by a conventional method. A single-phase perovskite structure of the ceramics was identified by the X-ray diffraction method. EDS analysis, performed for the individual grains of the tested sample, showed a good homogeneous distribution of all elements throughout the grains. The thermal behaviour of BaZrxTi1-xO3 (x = 0; 0.025; 0.125) ceramics was studied using the Differential Scanning Calorimetry (DSC). Measurements showed the influence of Zr addition on the character of phase transition in the BaTiO3 structure. The results were compared with these ones obtained for pure BaTiO3.

Zirconia implant abutments: A review

2009

Objectives: An increasing aesthetic demand within developed populations conducted to the fabrication of metalfree restorations and to a wide use of ceramic materials, due to its excellent characteristics of biocompatibility and aesthetics. With the incessant increase of commercial labels involved in this technological advance, a review is imposed on ceramic abutments, specifically on zirconia. We made a search of articles of peer-reviewed Journals in PubMed/ Medline, crossing the terms ?Dental Abutments?, ?Dental Porcelain? and ?Zirconia?. The review was divided by subtopics: zirconia physical and mechanical properties, precision fit in the implant-abutment interface, zirconia abutments str…

The Role of Zr in the High-Temperature Oxidation of Fe<sub>3</sub>Al

2008

The paper describes an examination of the effect of the addition of zirconium as a third element on the heat-resisting properties and explains the high temperature oxidation mechanism of Fe3Al intermetallic compounds. The Fe3Al and Fe3Al-0,05Zr specimens have been isothermally oxidized in the temperature range of 1173-1473 K in synthetic air for 100 hrs. The formed oxide layer, about 1,5-2 μm thick, was Al2O3. An examination of the cross-sectioned scales by SEM-EDS showed that the alumina layer consisted of a small inner columnar layer and an outer equiaxed grain layer. Additionally, very fine (50-150 nm) oxide grains rich in Zr, further identified as ZrO2, were found across the alumina sca…

Effective copolymerization of ethylene with α,ω-alkenols and homopolymerization of α,ω-alkenols catalyzed by aminophenolate zirconium complex

2019

Abstract A zirconium complex of diamine-bis(phenolate) ligand, [(tBu2O2NN’)ZrCl]2(μ-O) where (tBu2O2NN’) = Me2N(CH2)2N(CH2–2-O−-3,5-tBu2-C6H2)2, activated with (iBu)3Al/Ph3CB(C6F5)4, was for the first time used in copolymerization of ethylene with unsaturated alcohols (CH2 = CH(CH2)nCH2OH, where n = 7, 8, 3). The hydroxyl groups of comonomers were protected with R3-xAlClx (where x = 0 or 1, R = iBu, Et). In contrast to the formerly reported catalysts, the activity of this catalyst is much higher in ethylene/alkenols copolymerization than in ethylene homopolymerization and its lifetime is long. Moreover, the copolymers with high polar comonomer contents (up to 16.4 mol%, 52.3 wt%) were produ…

Extraction and immediate placement of root analogue zirconia implants: an overview

2011

Dental implants constitute a well-established approach for replacement of lost teeth with titanium being the most favored material for implantation. However, titanium has its limitations in esthetically demanding cases and neither the form nor material of such implants has changed much over the past 40 years. Immediate implantation has been introduced to overcome the disadvantages of conventional implantation which in turn has many disadvantages owing to the incongruence of the implant to the extraction socket. Today, there is scientific evidence that zirconia dental implants osseointegrate well and offer many advantages over titanium implants. The successful use of zirconia ceramics in ort…

Counter anion binding in the phenoxyimine, salan and metallocene olefin polymerization catalysts activated with perfluorophenylborate

2012

Abstract Ion pair separation is a process that may influence the activity of homogeneous catalysts of olefin polymerization. We have studied the energy of separation for selected titanium and zirconium metallocene and post-metallocene catalytic ion pairs by means of DFT, dispersion-corrected DFT and Paired Interacting Orbitals method (PIO). Unusually weak cation–anion interactions in the bis(phenoxyimine) systems were attributed to strong electron-donating properties of the phenoxyimine ligands. Energy decomposition analysis (EDA) revealed that almost 70% of the counter ion binding energy results from electrostatic interactions. The PIO method made it possible to analyze the nature of the c…

Local structural investigation of hafnia-zirconia polymorphs in powders and thin films by X-ray absorption spectroscopy

2019

Björn Matthey (Fraunhofer IKTS, Dresden) is acknowledged for providing HfO2 and ZrO2 powders on short notice after DESY’s renowned customs office punished us. Parts of this research were carried out at Petra III at DESY, a member of the Helmholtz Association (HGF). The experiments on single Si:HfO2 thin film samples were performed at the CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff. We would like to thank Edmund Welter for assistance (in using beamline P65) and DESY for enabling this research for proposal no. 20160591 and for travel support. T.S. acknowledges the German Research Foundation (DFG) for funding this work in the frame of the project “Inferox” (project…

Rapid chemical separation procedures

1976

Fast, discontinuous separation procedures are described for zirconium, niobium, technetium and antimony from fission products. Other rapid separation methods from aqueous solutions are summarized. The combination of a gas jet recoil transport system with a continuous solvent extraction technique and with a thermochromatographic separation method is presented. The application of such procedures to the investigation of new and already known short-lived nuclides is illustrated by some examples.

Zirconia in fixed prosthesis. A literature review

2014

Statement of problem: Evidence is limited on the efficacy of zirconia-based fixed dental prostheses. Objective: To carry out a literature review of the behavior of zirconium oxide dental restorations. Material and Methods: This literature review searched the Pubmed, Scopus, Medline and Cochrane Library databases using key search words “zirconium oxide,” “zirconia,” “non-metal restorations,” “ceramic oxides,” “veneering ceramic,” “zirconia-based fixed dental prostheses”. Both in vivo and in vitro studies into zirconia-based prosthodontic restoration behavior were included. Results: Clinical studies have revealed a high rate of fracture for porcelain-veneered zirconia-based restorations that …

Zirconium, Hafnium and Rare Earths behaviour during the transport in volcanic fluids. Geochemical effects throughout the sublimation and after intera…

This research indicates the fate of Zr, Hf and Rare Earths during their sublimation from the high-temperature gas phase (100° - 420 °C), in volcanic systems associated with different geodynamic regimes, and processes associated with volcanic sublimation representing the last natural “inorganic” interface where a detailed investigation into the behaviour of Rare Earths had never been conducted. The research was carried out in active volcanic systems at Vulcano (Aeolian Islands, Italy), Santorini (Cyclades Islands, Greece), Phlegrean Fields (Italy), Tenerife (Canary Islands, Spain) and Fogo Island (Cape Verde) where both fumaroles and thermal waters from submarine springs and inland wells wer…