0000000000011995
AUTHOR
L. Barucca
Preliminary design of EU DEMO helium-cooled breeding blanket primary heat transfer system
Abstract The European DEMO conceptual design foresees four Breeding Blanket (BB) concepts that rely on different cooling and breeding technologies. As DEMO has been conceived to deliver net electricity to the grid, the choice of the blanket coolant plays a pivotal role in the reactor design having a strong influence on plant operation, safety and maintenance. Moreover, the machine pulsed operation makes the BB Primary Heat Transfer System (PHTS) the main hub of the DEMO Balance of Plant (BoP). Within this framework, a study has been carried out to design the Ex-Vessel PHTS of the Helium-Cooled Pebble Bed (HCPB) BB concept. The paper describes criteria and rationale followed with the aim to …
Preliminary Thermo-Mechanical Design of the Once Through Steam Generator and Molten Salt Intermediate Heat Exchanger for EU DEMO
The European DEMOnstration power plant (DEMO) is considered to be the nearest-term fusion reactor capable of producing several hundred MWs of net electricity, operating with a closed tritium fuel-cycle (achieving the tritium self-sufficiency), and qualifing technological solutions for a fusion power plant with different breeding blanket (BB) concepts that are under investigation. The BB is a key component for the development of the DEMO plant design and, in particular, of those systems having the responsibility to remove the plasma-generated thermal power and its conversion in the electrical energy. This study deals with the preliminary thermo-mechanical design of the heat exchangers and st…
Maturation of critical technologies for the DEMO balance of plant systems
The Pre-Concept Design (PCD) of the Balance of Plant (BoP) systems of the EU-DEMO power plant is described in this paper for both breeding blanket (BB) concepts under assessment, namely the Water Cooled Lithium Lead (WCLL) BB and the Helium Cooled Pebble Bed (HCPB) BB. Moreover, the results of a preliminary evaluation of a number of BoP variants are discussed. This paper outlines the steps of the BoP design development, highlighting the project objectives and the strategy for their achievement under the very challenging requirements which include, among others, the intermittent nature of the DEMO plasma heat source. The main achievements during the PCD Phase will be reported together with t…
On the thermal dynamic behaviour of the helium-cooled DEMO fusion reactor
Abstract The EU-DEMO conceptual design is being conducted among research institutions and universities from 26 countries of European Union, Switzerland and Ukraine. Its mission is to realise electricity from nuclear fusion reaction by 2050. As DEMO has been conceived to deliver net electricity to the grid, the choice of the Breeding Blanket (BB) coolant plays a pivotal role in the reactor design having a strong influence on plant operation, safety and maintenance. In particular, due to the pulsed nature of the heat source, the Primary Heat Transfer System (PHTS) becomes a very important actor of the Balance of Plant (BoP) together with the Power Conversion System (PCS). Moreover, aiming to …
Status of EU DEMO heat transport and power conversion systems
Abstract DEMO in Europe is considered to be the nearest-term reactor design to follow ITER and capable of demonstrating production of electricity, operating with a closed fuel-cycle and to be a facilitating machine between ITER and a commercial reactor. The aim of this paper is to show the design progress of the complex system’s “chain” devoted to the extraction of the plasma generated pulsed thermal power and its conversion into electricity delivered to the grid, including the Primary Heat Transport System (PHTS), the Power Conversion System (PCS) and the Intermediate Heat Transport System (IHTS) – provided by an Energy Storage System (ESS) – in between PHTS and PCS, which is introduced fo…
Preliminary CAD implementation of EU-DEMO primary heat transfer systems for HCPB breeding blanket option
Abstract This paper focuses on the 3D CAD implementation of the pipework and the main equipment of the Primary Heat Transfer System of EU-DEMO fusion power plant. In particular, the systems related to the Helium-Cooled Pebble Bed Breeding Blanket option are considered here. During the pulse operation, the breeding blanket modules will be the main thermal power source; Divertor and the Vacuum Vessel will contribute in the definition of the total reactor power. All the In-Vessel generated power is rejected to the Power Conversion System through a molten salt Intermediate Heat Transport System. The latter is equipped with an Energy Storage System to allow for continuous operation also during t…
Pre-conceptual design of EU-DEMO Divertor primary heat transfer systems
Abstract In the frame of the activities promoted and encouraged by the EUROfusion Power Plant Physics and Technology (PPPT) department aimed at developing the EU-DEMO fusion reactor, strong emphasis has been recently addressed to the whole Balance of Plant (BoP) which represents the set of systems devoted to convert the plasma generated thermal power into electricity and to deliver it to the grid. Among these systems, the Divertor Primary Heat Transfer Systems (PHTSs) are intended to feed coolant to the two main components of the Divertor assembly, namely the Plasma Facing Components (PFCs) and the Cassette Body (CB). Since the DEMO Divertor must withstand high heat flux loads together with…
Pre-conceptual design of EU DEMO balance of plant systems: Objectives and challenges
Abstract The European Research Roadmap to the Realisation of Fusion Energy foresees that the DEMO reactor is going to succeed ITER in the pathway towards the exploitation of nuclear fusion, achieving long plasma operation time, demonstrating tritium self-sufficiency and producing net electric output on an industrial scale. Therefore, its design must be more oriented towards the Balance of Plant (BoP) than it is in ITER. Since the early pre-conceptual phase of the DEMO project, emphasis has been laid on identifying the main requirements affecting the overall architecture of the BoP. For instance, specific efforts and proper solutions have been envisaged to cope with the pulsed nature of the …
Progress in the design development of EU DEMO helium-cooled pebble bed primary heat transfer system
Abstract In the frame of the activities promoted and encouraged by the EURO-fusion Power Plant Physics and Technology (PPPT) department aimed at developing the EU-DEMO fusion reactor, strong emphasis has been recently posed to the whole Balance of Plant (BoP) which represents the set of systems devoted to convert the plasma generated thermal power into electricity and to deliver it to the grid. Among these systems, a very important role is played by the Breeding Blanket (BB) Primary Heat Transfer System (PHTS) as it is responsible to extract more than 80% of the fusion plasma power. In this framework, University of Palermo, Ansaldo Nucleare and CREATE have focused their work to improve ther…
Overview of the DEMO staged design approach in Europe
This paper describes the status of the pre-conceptual design activities in Europe to advance the technical basis of the design of a DEMOnstration Fusion Power Plant (DEMO) to come in operation around the middle of this century with the main aims of demonstrating the production of few hundred MWs of net electricity, the feasibility of operation with a closed-tritium fuel cycle, and maintenance systems capable of achieving adequate plant availability. This is expected to benefit as much as possible from the ITER experience, in terms of design, licensing, and construction. Emphasis is on an integrated design approach, based on system engineering, which provides a clear path for urgent R&D …
The European DEMO fusion reactor: Design status and challenges from balance of plant point of view
DEMO initial conceptual design studies are being conducted in Europe as part of the European Union Roadmap to Fusion Electricity, which aims to demonstrate the feasibility of electricity produced by nuclear fusion reactors around the middle of this century. The aim of this paper is to provide an overview of the DEMO project, highlighting its main characteristics and challenges in terms of design, integration, and operation. Particular emphasis is given on some important systems of the Balance of Plant (BoP), such as the primary heat transfer systems, the related power conversion systems, and the electrical power plant. The relevance of such systems is due to the need of a continuous reanaly…
Key EU DEMO plant and building layout criteria
Abstract An early attention to the layout of both plant site and its buildings is essential in a complex plant under preliminary design as DEMO in order to meet the assigned targets, namely i) the licensing requirements ii) a good availability in delivery electricity to the grid. The layout definition has to follow several criteria that become more complex and stringent for nuclear buildings, e.g. functional, maintenance, fire protection, safety, human factors, shielding, and remote handling. The criterion As Low As Reasonable Achievable, with respect to the dose to the staff, has to be applied in design, operation, maintenance and decommissioning phases. The tokamak building, where several…
Progress in EU Breeding Blanket design and integration
Abstract In Europe (EU), in the frame of the EUROfusion consortium activities, four Breeding Blanket (BB) concepts are being developed with the aim of fulfilling the performances required by a near-term fusion power demonstration plant (DEMO) in terms of tritium self-sufficiency and electricity production. The four blanket options cover a wide range of technological possibilities, as water and helium are considered as possible coolants and solid ceramic breeder in combination with beryllium and PbLi as tritium breeder and neutron multipliers. The strategy for the BB selection and operation has to account for the challenging schedule of the EU DEMO, the ambitious operational requirements of …
Tokamak cooling systems and power conversion system options
DEMO will be a fusion power plant demonstrating the integration into the grid architecture of an electric utility grid. The design of the power conversion chain is of particular importance, as it must adequately account for the specifics of nuclear fusion on the generation side and ensure compatibility with the electric utility grid at all times. One of the special challenges the foreseen pulsed operation, which affects the operation of the entire heat transport chain. This requires a time-dependant analysis of different concept design approaches to ensure proof of reliable operation and efficiency to obtain nuclear licensing. Several architectures of Balance of Plant were conceived and dev…