The 100 most-cited articles in orthodontics: A bibliometric study

ABSTRACT Objectives: To identify and analyze the 100 most-cited articles in orthodontics indexed in the Web of Science Category of “Dental, Oral Surgery and Medicine” from 1946 to 2016. Materials and Methods: On hundred articles were identified in a search of the database of the ISI Web of Science and Journal Citation Reports, applying the truncated search term “orthodon*.” Records were manually refined and normalized to unify terms and to remove typographical, transcription, and/or indexing errors. Results: The 100 most-cited articles were published between 1946 and 2012, with numbers of citations ranging from 115 to 881. Of the 251 authors participating, 87.65% published a single work, wh…

Influence of skeletal class in the morphology of cervical vertebrae: A study using cone beam computed tomography

ABSTRACT Objectives: To quantify the prevalence of cervical vertebrae anomalies and to analyze any association between them and skeletal malocclusions or head posture positions in the same study. Materials and Methods: Two hundred forty patients who were attending the Department of Orthodontics of the University of Valencia for orthodontic treatment were selected and divided into three groups: skeletal Class I (control group, 0° <ANB < 4°), Class II (ANB ≥ 4°), and Class III (ANB ≤ 0°) according to ANB Steiner angle. The morphology of the first five cervical vertebrae was analyzed with cone beam computed tomography to identify any anomalies. Intra- and interobserver error meth…

Relationship between perception of smile esthetics and orthodontic treatment in Spanish patients

Este artículo se encuentra disponible en la página web de la revista en la siguiente URL: https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0201102 One of the main objectives of orthodontic treatment is to achieve an esthetic smile. This study set out to analyze differences in the perception of smile esthetics among patients before and after receiving orthodontic treatment. 250 Spanish patients analyzed a single photograph in which, by means of computer software, midline diastema, black triangle, gingival margin of the left central incisor, and gingival (ªgummyº) smile were altered. Each patient analyzed these images before and after undergoing orthodontic treatment. Patient…

Influence of first and second premolar extraction or non-extraction treatments on mandibular third molar angulation and position. A comparative study.

The mandibular third molar (3M) is the tooth that is most often impacted, with lack of space being one of the reasons. In some orthodontic treatments, premolars are extracted in order to create space. The aims of our study are: firstly, to assess the changes in the angulation and position of the 3M in cases treated either with or without extraction of the first or second premolars; secondly, to analyse the variation in the gonial angle and the degree of inclusion of the 3M; and lastly, to establish a predictive impaction model for 3M. This study included 88 patients: 28 patients treated with extractions of first premolars, 30 with second premolars and 30 without. The initial and final ortho…

Relationship between indication for tooth extraction and outcome of immediate implants: a retrospective study with 5 years of follow-up

Objectives: The aims of this retrospective study were to evaluate the survival rate of a series of immediate implants after 3 years of follow-up and to study the relationship between survival and indication for tooth extraction. Study design: A retrospective study of patients treated with immediate implants between January 2003 and Dec - ember 2008 was carried out. All patients receiving at least one post-extraction implant and a minimum follow-up of 5 years were included. Results: After 60 months, 30 immediate implants had been lost in 17 patients, yielding a total implant success rate of 93.8%. None of the implants placed failed after the extraction of included canines (100% success rate)…

Cross-sectional human study of soft tissue chin (STC) thickness in adult patients in relation to sex, facial pattern and skeletal class

Abstract Purpose The aim of this study was to study the relations between the soft tissue chin (STC) and sex, skeletal class, and facial pattern; and to describe the shape and behavior of the STC. Methods 385 non-growing patients were selected, 206 women and 179 men, with a mean age of 28.8 years (SD 4.2). Patients were divided into groups by skeletal class (class I, II or III) and facial pattern (brachyfacial, mesofacial or dolichofacial). STC thicknesses were measured at pogonion (Pg), soft pogonion (Pg′), gnathion (Gn), soft gnathion (Gn′), menton (Me) and soft menton (Me′) in the CBCTs. Results Sexual dimorphism was observed at Pg-Pg′ and Me-Me′. STC thickness was not related to skeleta…

Comparison of digital protocols for the measurement of peri-implant marginal bone loss

Background The measurement of peri-implant marginal bone loss is currently carried out using digital methods of radiographic analysis assisted by various types of software. The purpose of this study was to compare the characteristics of three different softwares: specific radiology software for the development and visualization of radiological images in DICOM format (3Dicom Viewer®), advanced level software for professional editing of bitmap images (or raster graphics) (Adobe Photoshop®), and mid-level software for processing bitmap-type images, programmed in Java and in the public domain (ImageJ®). Material and Methods It was verified that the three softwares used are valid for the measure…

Anxiety before extraction of impacted lower third molars.

Objetives: Assess levels of trait anxiety, state anxiety and dental anxiety before extraction of lower third molars and check the correlation and reliability of the scales used for the measurement of preoperative anxiety. Study D esign: A prospective study of patients treated with extraction of a lower third molar between September 2010 to December 2010 was carried out. A total of 125 patients were included in the study. All of them were patients of the Oral Surgery and Implantology Department (Valencia University Medical and Dental School, Valencia, Spain). Before surgery, patients had to complete a preoperative protocol with 4 scales: the STAI-T (State-Trait Anxiety Inventory-Trait) for m…

A comparative study of the pharyngeal airway space, measured with cone beam computed tomography, between patients with different craniofacial morphologies.

Abstract Purpose The present study aims to determine any existing association between airway dimensions, measured with cone beam computed tomography (CBCT), and the different patient craniofacial morphologies. Material and methods Sixty CBCT (Dental Picasso Master 3D) images, from patients treated at the Orthodontics Master at Valencia University were selected. The program InVivoDental 5.1 was used to visualize sections, analyze three-dimensional images, and perform airway measurements in the three planes of the space. Intra- and interobserver error methods were recorded. After that, measurements at three different levels of the airway (upper, medium, lower) were taken, in both the anteropo…

Bibliometric analysis of the scientific production in implantology (2009-2013).

Objectives To quantify, using bibliometric indicators, the scientific productivity of researchers, organizations, and countries, publishing articles on implantology in dental journals indexed in Journal Citation Reports between 2009 and 2013. Materials and methods Published texts were identified by applying the truncated search term “implant*.” Document type was limited to “Article.” Records were manually refined and normalized to unify terms and to remove typographical, transcription, and/or indexing errors. Results A total of 6088 articles were located. A progressive increase in the rate of publication was observed, especially between 2010 and 2012. This increase was clearly linked to inc…

New regression equations for predicting human teeth sizes

Introduction The aims of the study were; to evaluate the applicability of the Moyers and Tanaka-Johnston Methods to individuals with a Spanish ancestry, to propose new regression equations using the lower four permanents incisors as predictors for the sum of the widths of the lower permanent canine and premolars, and to compare the new data to those from other populations. Methods A total of 359 Spanish ancestry adolescents were selected. Their dental casts were measured using a 2D computerized system. Real teeth measurements were compared with those predicted using Moyers probability tables and Tanaka and Johnston equations, and standard regression equations were then developed. Results Re…

Comparative study of mandibular linear measurements obtained by cone beam computed tomography and digital calipers

Objectives: Cone beam computed tomography (CBCT) is an innovative dental of imaging system characterized by rapid volumetric imaging with patient exposure to a single dose of radiation. The present study was carried out to compare the linear measurements obtained with CBCT and digital caliper in 20 mandibles from human cadavers. Study design: A total of 4800 linear measurements were measured between different mandibular anatomical points with CBCT and digital caliper. The real measurements were defined as those obtained with the digital caliper. Posteriorly, the mandibles were scanned to obtain the CBCT images, with software-based measurements of the distances. Results: The measurements obt…

Reply

Smile esthetics from odontology students' perspectives

ABSTRACT Objectives: To analyze the perception of smile esthetics and its alterations in dental degree students; to determine whether there are differences in that perception among students in different study years on those courses and between genders; and to determine if the circumstance of having received prior orthodontic treatment could influence that perception. Material and Methods: Students (n = 192) in different study years of the dental degree course at the University of Valencia, Spain, analyzed two photographs of a patient in which, by means of computer software, midline diastema, upper and lower midlines, crown length of the maxillary right central incisor, occlusal cant, and “g…

A comparison between dental measurements taken from CBCT models and those taken from a digital method.

The aims of the study were to assess speed, reliability, accuracy, and reproducibility in measuring mesiodistal tooth sizes, bicanine widths, bimolar widths, and arch lengths (ALs) using cone beam computed tomography (CBCT) and to compare them with the same measurements obtained using a two-dimensional (2D) Digital Method. Plaster study models were made for 27 patients and then digitalized and measured using a 2D Digital Method. CBCTs were undertaken on the same 27 patients using the Dental Picasso Master 3D® and the images obtained were then analysed using the InVivoDental program. The correlation study of the two measuring methods, which were compared by determining the regression paramet…

Analysis of scientific production in spanish implantology

Background The aim of the study was to quantify the scientific productivity of researchers, organizations, and regions in Spain that publish articles on implantology in dental journals indexed in Journal Citation Reports. Material and Methods A search was conducted among the core collection of Thomson Reuters’ Web of Science database, on the basis of its broad thematic and geographic coverage of health sciences. The search identified original articles – the main vehicle for the dissemination of research results. The search was conducted in July 2016, applying the truncated search term ‘implant*’ to locate original articles on implantology and its derivative forms. The search was conducted w…

Evaluation of the validity of the Bolton Index using cone-beam computed tomography (CBCT)

Aims: To evaluate the reliability and reproducibility of calculating the Bolton Index using cone-beam computed tomography (CBCT), and to compare this with measurements obtained using the 2D Digital Method. Material and Methods: Traditional study models were obtained from 50 patients, which were then digitized in order to be able to measure them using the Digital Method. Likewise, CBCTs of those same patients were undertaken using the Dental Picasso Master 3D® and the images obtained were then analysed using the InVivoDental programme. Results: By determining the regression lines for both measurement methods, as well as the difference between both of their values, the two methods are shown t…