High-pressure characterization of multifunctional CrVO4

[EN] The structural stability and physical properties of CrVO(4)under compression were studied by x-ray diffraction, Raman spectroscopy, optical absorption, resistivity measurements, andab initiocalculations up to 10 GPa. High-pressure x-ray diffraction and Raman measurements show that CrVO(4)undergoes a phase transition from the ambient pressure orthorhombic CrVO4-type structure (Cmcm space group, phase III) to the high-pressure monoclinic CrVO4-V phase, which is proposed to be isomorphic to the wolframite structure. Such a phase transition (CrVO4-type -> wolframite), driven by pressure, also was previously observed in indium vanadate. The crystal structure of both phases and the pressure …

Epidemiology of sharka disease in Spain

Le PPV a ete detecte pour la premiere fois en Espagne en 1984 sur des pruniers japonais (Prunus salicina Lind1) cv. Red Beaut et s'est dissemine tres rapidement a d'autres cultivars de pruniers et d'abricotiers japonais et europeens tout en epargnant les cultivars de pechers. Dans les annees suivant la detection du PPV, l'espece de puceron predominante qui visitait les vergers de Prunus dans les regions mediterraneennes etait Aphis gossypii suivie par Aphis spiraecola, cette derniere etant la principale espece de puceron trouvee actuellement. Les deux especes sont considerees comme les principaux vecteurs du PPV dans les regions de culture de Prunus precoces. Une analyse spatiale de la diss…

Selective oxidation of C3–C4 olefins over Mo-containing catalysts with tetragonal tungsten bronze structure

Abstract Mo–V–Nb–P–O-based catalysts with a tetragonal tungsten bronze-type (TTB) structure have been prepared hydrothemally from a H 3 PMo 12 O 40 Keggin-type heteropolyacid. These catalysts have been tested in the oxidation of C 3 –C 4 olefins (propene, isobutene and 1-butene). Although the catalytic performance depends on the nature of the olefin fed the TTB-type catalysts prepared in the presence of elements of the V and VI groups such as Te, Sb and Bi have shown a high selectivity to partial oxidation products, especially that with Te. However, in the absence of these elements the TTB-catalysts present a high catalytic activity to deep oxidation. The selectivity to partial oxidation pr…

Selective oxidation of ethane: Developing an orthorhombic phase in Mo–V–X (X=Nb, Sb, Te) mixed oxides

Abstract Mo–V–X (X = Nb, Sb and/or Te) mixed oxides have been prepared by hydrothermal synthesis and heat-treated in N2 at 450 °C or 600 °C for 2 h. The calcination temperature and the presence or absence of Nb determines the nature of crystalline phases in the catalyst. Nb-containing catalysts heat-treated at 450 °C are mostly amorphous solids, while Nb-free catalysts heat-treated at 450 °C and samples treated at 600 °C clearly contain crystalline phases. TPR-H2 experiments show higher H2-consumption on catalysts with amorphous phases. Catalytic results in the oxidative dehydrogenation of ethane indicate that the selective production of the olefin is strongly related to the development of …

Oxidative dehydrogenation of ethane on Te-containing MoVNbO catalysts

Abstract Ethylene has selectively been obtained during the oxidative dehydrogenation of ethane on a Mo–V–Te–Nb–O mixed oxide catalyst. The catalyst was prepared hydrothermally and heat-treated at 600 °C for 2 h in a N2-stream. For comparison, undoped and Te-doped Mo–V–Nb–O catalysts and Mo–V–Te–O and Mo–Te–Nb–O mixed oxides have also been prepared. The catalytic performance of the Mo–V–Nb–Te–O mixed oxide catalyst cannot be explained by the incorporation of Te on the surface of a Mo–V–Nb–O mixed oxide but by the presence of an orthorhombic Te2M20O57 (M=Mo, V, Nb) crystalline phase. The role of tellurium in these catalysts is also discussed.

Selective oxidative dehydrogenation of ethane over MoVSbO mixed oxide catalysts

Abstract Mo–V–Sb–O mixed metal oxides were prepared, characterized and tested for the oxidative dehydrogenation of ethane (ODH). These catalysts are active and selective in the oxidative dehydrogenation of ethane to ethylene, although their catalytic performance depends strongly on the calcination temperature. The best catalytic results were obtained on samples heat-treated at 600 °C in N 2 (with selectivities to ethylene higher than 80% at ethane conversions about 65%). Moreover, a loss in the catalyst activity is initially observed on these catalysts as a consequence of modifications in the nature of the crystalline phases. Changes on the oxidation state of antimony ions on the surface of…

Selective oxidation of propane over alkali-doped Mo-V-Sb-O catalysts

[EN] Alkali metal-doped MoVSbO catalysts have been prepared by impregnation of a MoVSbO-mixed oxide (prepared previously by a hydrothermal synthesis) and finally activated at 500 or 600 degrees C in N-2. The catalysts have been characterized and tested for the selective oxidation of propane and propylene. Alkali-doped catalysts improved in general the catalytic performance of MoVSbO, resulting more selective to acrylic acid and less selective to acetic acid than the corresponding alkali-free MoVSbO catalysts. However, the specific behaviour strongly depends on both the alkali metal added and/or the final activation temperature. At isoconversion conditions, catalysts activated at 600 degrees…

Selective oxidative dehydrogenation of ethane on MoVTeNbO mixed metal oxide catalysts

Abstract MoVTeNbO catalysts, prepared by hydrothermal synthesis, are active and highly selective in the ODH of ethane, especially those with a MoVTeNb molar ratio of 1–0.15–0.16–0.17 and heat-treated at 600–650 °C. On the best catalyst, selectivities higher than 80% at ethane conversion levels higher than 80% have been obtained operating at relatively low reaction temperatures (340–400 °C). Thus, yields of ethylene of ca. 75% have been obtained, which exceeds the best yield reported in the literature. Te 2 M 20 O 57 ( M =Mo, V, Nb) and (V,Nb)-substituted θ -Mo 5 O 14 , in addition to small amounts of the Te 0.33 M O 3.33 ( M =Mo, V, Nb) phase, can be proposed in the most selective cataly…

The selective oxidative dehydrogenation of ethane over hydrothermally synthesised MoVTeNb catalysts

Mo–V–Te–Nb metal oxide catalysts prepared by hydrothermal synthesis and heat-treated in N2 at high temperatures (600–700 °C) show high activity and selectivity for the oxidative dehydrogenation of ethane to ethene. Yields of ethene of 75% have been obtained at 400 °C on the best catalysts. Dejoz Garcia, Ana Maria, Ana.M.Dejoz@uv.es

Mo–V–Nb mixed oxides as catalysts in the selective oxidation of ethane

Abstract Mo–V–Nb–O mixed metal oxides, obtained by heat-treatment in N 2 at 425 °C, have been studied as catalysts in the oxidative dehydrogenation of ethane. They present higher catalytic activity, while maintaining the same selectivity to ethylene, than the corresponding metal oxides calcined under air. Both amorphous and crystalline phases are present on active and selective catalysts. The implications of the presence of these phases as well as their physicochemical characteristics on the nature of active and selective sites are discussed.

Corrigendum to “Selective oxidative dehydrogenation of ethane on MoVTeNbO mixed metal oxides catalysts” [J. Catal. 225 (2) (2004) 428–438]

Redescription ofPhysaloptera brevivaginata Seurat, 1917 (Nematoda: Physalopteridae) from the batMyotis blythii (Tomes) (Chiroptera: Vespertilionidae) in Spain

Physaloptera brevivaginata Seurat, 1917 (Nematoda: Physalopteridae) is redescribed. Seurat's (1917) original description of this species was based on a single immature female. Detailed morphological study of several males, mature and, above all, immature females from the stomach of the lesser mouse-eared batMyotis blythii (Tomes) (Chiroptera: Vespertilionidae) in Spain, has elucidated many new morphological characters. This physalopterid species is distinguished from other closely-related species by the lengths of the body and spicules, the equatorial position of the vulva, the morphology of the female reproductive system and by a small conical process on the tail of mature females.M. blyth…

Mo-containing tetragonal tungsten bronzes. The influence of tellurium on catalytic behaviour in selective oxidation of propene

Abstract Te-free and Te-containing multicomponent Mo-based catalysts presenting tetragonal tungsten bronze (TTB) structure have been prepared, characterized and tested for the selective oxidation of propene. The catalysts were prepared hydrothermally and heat treated at 700 °C. The structural characterization performed by means of XRD, FTIR, SAED and HRTEM confirms the incorporation of tellurium to the TTB structural framework and shows that its presence does not modify in essence the crystalline structure. However, the incorporation of Te strongly modifies the catalytic performance, and the highest yield to acrolein has been achieved on catalysts with Te/Mo atomic ratios in bulk of 0.03. T…