0000000000040287
AUTHOR
Roshan Budhathoki
showing 7 related works from this author
Dry chlorination of spent nickel metal hydride battery waste for water leaching of battery metals and rare earth elements
2022
An efficient leaching process was developed for nickel, cobalt, and the rare earth elements (REEs) from spent nickel metal hydride (NiMH) battery waste. The process involves dry chlorination with ammonium chloride in low temperature to produce water-soluble chlorinated compounds, followed by simple water leaching. The factors affecting the conversion and solubilization were studied, including the amount of ammonium chloride, residence time and temperature in dry chlorination, and solid to liquid ratio, time and temperature in water leaching. As a result, the dry chlorination process was found to produce ammonium and chloride containing products, depending on the temperature of the process: …
Three zone modeling of downdraft biomass gasification : equilibrium and finite kinetic approach
2013
Mathematical models and simulations are being practiced exceedingly in the field of research and development work. Simulations provide a less expensive means of evaluating the benefits and associated risk with applied field. Gasification is a complex mechanism, which incorporates thermochemical conversion of carbon based feedstock. Therefore, simulation of gasification provides a better comprehension of physical and chemical mechanism inside the gasifier than general conjecture and assist in optimizing the yield. The main objectives of present thesis work involve formulation of separate sub-model for pyrolysis and oxidation zone from published scientific references, and assembling it with p…
Particle size based recovery of phosphorus from combined peat and wood fly ash for forest fertilization
2016
Abstract Correlations between the concentrations of P, K, and As with particle size in fly ash from power plants were examined with a viewpoint to obtain fractions suitable for forest fertilization. Fly ash samples from several CHP plants were fractionated by using four sieves and the five fractions were analyzed by ICP-OES; it was found that both P and K are concentrated in smallest size (
Selective recovery of phosphorus as AlPO4 from silicon-free CFB-derived fly ash leachate
2018
The prospect of phosphorus (P) recovery from siliceous fly ash was investigated. The phosphorus content in the pristine fly ash was 1.21%. Obtaining pure phosphorus products from fly ash is very challenging because of high concentration of other elements, silicon (Si) at 17.3% being the major contaminant. The fly ash was fractionated with sieve size of 125 μm to concentrate the phosphorus in the small-size fraction, which also facilitated the removal of 78% of silica (Si) in the solid phase. The fractionated fly ash was treated with 8 M HCl in order to remove 98% of Si by aging (5 h) of leachate until precipitation of Si-gel, and a phosphorus-rich solution is obtained. Iron (Fe) is also con…
Removal of silicon from CFB-derived fly ash leachate in the context of phosphorus recovery
2018
High concentrations of dissolved silica in the acid leachate impose two major challenges on precipitation based recovery of phosphorus (P). Firstly, co-precipitation of colloidal silica in the acidic regimes decreases the purity and value of precipitated P-products. In addition, silica scaling on internal surfaces of equipment is also a problematic issue in industrial operations. Therefore, removal of dissolved silica prior to P-recovery process minimizes the risks of Si-contamination in P-products and Si-scaling. In the present study, silica removal was achieved by accelerated silica polymerization with higher acidity and ionic strength of mineral acid, which also assisted the leaching of …
Effective Recovery Process of Copper from Waste Printed Circuit Boards Utilizing Recycling of Leachate
2020
AbstractThis study presents an optimized leaching and electrowinning process for the recovery of copper from waste printed circuit boards including studies of chemical consumption and recirculation of leachate. Optimization of leaching was performed using response surface methodology in diluted sulfuric acid and hydrogen peroxide media. Optimum leaching conditions for copper were found by using 3.6 mol L−1 sulfuric acid, 6 vol.% hydrogen peroxide, pulp density of 75 g L−1 with 186 min leaching time at 20°C resulting in complete leaching of copper followed by over 92% recovery and purity of 99.9% in the electrowinning. Study of chemical consumption showed total decomposition of hydrogen pero…
Beneficiation, desilication and selective precipitation techniques for phosphorus refining from biomass derived fly ash
2018
The supply of affordable phosphorus (P), a biocritical element, is at great risk due to the utilization of limited natural phosphate minerals at an unprecedented scale. The need of phosphorus recovery to sustain the anthropogenic P-cycle was recog- nized and fly ash, a waste product from the combustion of renewable biofuels, was selected as the secondary resource. Increasing supply of fly ash in the future due to growing use of forest biofuels in energy production also contributes to its suitability for P-recovery. Fly ash comprises of silicates, oxides, carbonates, phosphates and hydroxides of the elements that potentially represent the entire periodic table. This only augments the complexity…