Influence of PVP/VA copolymer composition on drug–polymer solubility
In this study, the influence of copolymer composition on drug-polymer solubility was investigated. The solubility of the model drug celecoxib (CCX) in various polyvinylpyrrolidone/vinyl acetate (PVP/VA) copolymer compositions (70/30, 60/40, 50/50 and 30/70 w/w) and the pure homopolymers polyvinylpyrrolidone (PVP) and polyvinyl acetate (PVA) was predicted at 25 °C using a thermal analysis method based on the recrystallization of a supersaturated amorphous dispersion (recrystallization method). These solubilities were compared with a prediction based on the solubility of CCX in the liquid monomeric precursors of PVP/VA, N-vinylpyrrolidone (NVP) and vinyl acetate (VA), using the Flory-Huggins …
In Vitro Evaluation of Poly(lactide-co-glycolide) In Situ Forming Gels for Bedaquiline Fumarate Salt and Pharmacokinetics Following Subcutaneous Injection in Rats
This study evaluated in vitro and in vivo drug release of bedaquiline from in situ forming gels (ISGs) containing 200 mg eq./g bedaquiline fumarate salt prepared with four different grades of poly(d,l-lactide) (PDLLA) or poly(d,l-lactide-co-glycolide) (PLGA) with a lactide/glycolide ratio of 50/50 or 75/25 and acid (A) or ester (E) end-capping in N-methyl-2-pyrrolidone at a polymer/solvent ratio of 20/80% (w/w). Mean in vitro drug release in 0.05 M phosphate buffer pH 7.4 with 1% (w/v) sodium lauryl sulphate was 37.3, 47.1, 53.3, and 62.3% within 28 days for ISGs containing PLGA5050A, PDLLA, PLGA7525A, and PLGA7525E, respectively. The data suggested that drug release was primarily controlle…
Exploring gastric emptying rate in minipigs: Effect of food type and pre-dosing of metoclopramide.
The present study investigated the gastric emptying rate in Gottingen minipigs pre- and post-prandial and evaluated the effect of metoclopramide on the same parameter, using paracetamol as an absorption marker. The pharmacokinetic evaluation of the obtained plasma concentration data for paracetamol demonstrated that the fastest gastric emptying rate was observed in the animals that were allowed access to normal pig food. There was no significant difference in the stomach emptying rate observed between fasted and fed minipigs, when fed either with a FDA standard breakfast or a nutritional energy drink. Pre-dosing minipigs with metoclopramide (0.2 or 0.4 mg/kg) did not demonstrate any effect …
In vivo methods for drug absorption - comparative physiologies, model selection, correlations with in vitro methods (IVIVC), and applications for formulation/API/excipient characterization including food effects.
This review summarizes the current knowledge on anatomy and physiology of the human gastrointestinal tract in comparison with that of common laboratory animals (dog, pig, rat and mouse) with emphasis on in vivo methods for testing and prediction of oral dosage form performance. A wide range of factors and methods are considered in addition, such as imaging methods, perfusion models, models for predicting segmental/regional absorption, in vitro in vivo correlations as well as models to investigate the effects of excipients and the role of food on drug absorption. One goal of the authors was to clearly identify the gaps in today's knowledge in order to stimulate further work on refining the e…
Statistical Analysis of a Method to Predict Drug–Polymer Miscibility
In this study, a method proposed to predict drug-polymer miscibility from differential scanning calorimetry measurements was subjected to statistical analysis. The method is relatively fast and inexpensive and has gained popularity as a result of the increasing interest in the formulation of drugs as amorphous solid dispersions. However, it does not include a standard statistical assessment of the experimental uncertainty by means of a confidence interval. In addition, it applies a routine mathematical operation known as "transformation to linearity," which previously has been shown to be subject to a substantial bias. The statistical analysis performed in this present study revealed that t…
Influence of polymer molecular weight on in vitro dissolution behavior and in vivo performance of celecoxib:PVP amorphous solid dispersions
In this study, the influence of the molecular weight of polyvinylpyrrolidone (PVP) on the non-sink in vitro dissolution and in vivo performance of celecoxib (CCX):PVP amorphous solid dispersions were investigated. The dissolution rate of CCX from the amorphous solid dispersions increased with decreasing PVP molecular weight and crystallization inhibition was increased with increasing molecular weight of PVP, but reached a maximum for PVP K30. This suggested that the crystallization inhibition was not proportional with molecular weight of the polymer, but rather there was an optimal molecular weight where the crystallization inhibition was strongest. Consistent with the findings from the non…
A survey on IVIVC/IVIVR development in the pharmaceutical industry – Past experience and current perspectives
The present work aimed to describe the current status of IVIVC/IVIVR development in the pharmaceutical industry, focusing on the use and perception of specific approaches as well as successful and failed case studies. Two questionnaires have been distributed to 13 EFPIA partners of the Oral Biopharmaceutics Tools Initiative and to the Pharmacokinetics Working Party of the European Medicines Agency in order to capture the perspectives and experiences of industry scientists and agency members, respectively. Responses from ten companies and three European Agencies were received between May 21st 2014 and January 19th 2016. The majority of the companies acknowledged the importance of IVIVC/IVIVR…
Validation of Dissolution Testing with Biorelevant Media: An OrBiTo Study.
Dissolution testing with biorelevant media has become widespread in the pharmaceutical industry as a means of better understanding how drugs and formulations behave in the gastrointestinal tract. Until now, however, there have been few attempts to gauge the reproducibility of results obtained with these methods. The aim of this study was to determine the interlaboratory reproducibility of biorelevant dissolution testing, using the paddle apparatus (USP 2). Thirteen industrial and three academic laboratories participated in this study. All laboratories were provided with standard protocols for running the tests: dissolution in FaSSGF to simulate release in the stomach, dissolution in a singl…
Evaluation of drug-polymer solubility curves through formal statistical analysis: comparison of preparation techniques.
ABSTRACT: In this study, the influence of the preparation technique (ball milling, spray drying, and film casting) of a supersaturated amorphous dispersion on the quality of solubility determinations of indomethacin in polyvinylpyrrolidone was investigated by means of statistical analysis. After annealing of the amorphous dispersions above the crystallization temperature for 2 h, the solubility curve was derived from the glass transition temperature of the demixed material using the Gordon–Taylor relationship and fitting with the Flory–Huggins model. The study showed that the predicted solubility from the ball-milled mixtures was not consistent with those from spray drying and film casting,…
Six years of progress in the oral biopharmaceutics area - A summary from the IMI OrBiTo project.
OrBiTo was a precompetitive collaboration focused on the development of the next generation of Oral Biopharmaceutics Tools. The consortium included world leading scientists from nine universities, one regulatory agency, one non-profit research organisation, three small/medium sized specialist technology companies together with thirteen pharmaceutical companies. The goal of the OrBiTo project was to deliver a framework for rational application of predictive biopharmaceutics tools for oral drug delivery. This goal was achieved through novel prospective investigations to define new methodologies or refinement of existing tools. Extensive validation has been performed of novel and existing biop…
Recent advances and potential applications of modulated differential scanning calorimetry (mDSC) in drug development.
Differential scanning calorimetry (DSC) is frequently the thermal analysis technique of choice within preformulation and formulation sciences because of its ability to provide detailed information about both the physical and energetic properties of a substance and/or formulation. However, conventional DSC has shortcomings with respect to weak transitions and overlapping events, which could be solved by the use of the more sophisticated modulated DSC (mDSC). mDSC has multiple potential applications within the pharmaceutical field and the present review provides an up-to-date overview of these applications. It is aimed to serve as a broad introduction to newcomers, and also as a valuable refe…
In vitro evaluation of poloxamer in situ forming gels for bedaquiline fumarate salt and pharmacokinetics following intramuscular injection in rats
Graphical abstract
Comparative Study of Different Methods for the Prediction of Drug–Polymer Solubility
In this study, a comparison of different methods to predict drug-polymer solubility was carried out on binary systems consisting of five model drugs (paracetamol, chloramphenicol, celecoxib, indomethacin, and felodipine) and polyvinylpyrrolidone/vinyl acetate copolymers (PVP/VA) of different monomer weight ratios. The drug-polymer solubility at 25 °C was predicted using the Flory-Huggins model, from data obtained at elevated temperature using thermal analysis methods based on the recrystallization of a supersaturated amorphous solid dispersion and two variations of the melting point depression method. These predictions were compared with the solubility in the low molecular weight liquid ana…
Oral biopharmaceutics tools – Time for a new initiative – An introduction to the IMI project OrBiTo
OrBiTo is a new European project within the IMI programme in the area of oral biopharmaceutics tools that includes world leading scientists from nine European universities, one regulatory agency, one non-profit research organization, four SMEs together with scientists from twelve pharmaceutical companies. The OrBiTo project will address key gaps in our knowledge of gastrointestinal (GI) drug absorption and deliver a framework for rational application of predictive biopharmaceutics tools for oral drug delivery. This will be achieved through novel prospective investigations to define new methodologies as well as refinement of existing tools. Extensive validation of novel and existing biopharm…
A Promising New Method to Estimate Drug-Polymer Solubility at Room Temperature
The established methods to predict drug-polymer solubility at room temperature either rely on extrapolation over a long temperature range or are limited by the availability of a liquid analogue of the polymer. To overcome these issues, this work investigated a new methodology where the drug-polymer solubility is estimated from the solubility of the drug in a solution of the polymer at room temperature using the shake-flask method. Thus, the new polymer in solution method does not rely on temperature extrapolations and only requires the polymer and a solvent, in which the polymer is soluble, that does not affect the molecular structure of the drug and polymer relative to that in the solid st…
Effect of polymer type and drug dose on the in vitro and in vivo behavior of amorphous solid dispersions.
This study investigated the non-sink in vitro dissolution behavior and in vivo performance in rats of celecoxib (CCX) amorphous solid dispersions with polyvinyl acetate (PVA), polyvinylpyrrolidone (PVP) and hydroxypropyl methylcellulose (HPMC) at different drug doses. Both in vitro and in vivo, the amorphous solid dispersions with the hydrophilic polymers PVP and HPMC led to higher areas under both, the in vitro dissolution and the plasma concentration-time curves (AUC) compared to crystalline and amorphous CCX for all doses. In contrast, the amorphous solid dispersion with the hydrophobic polymer PVA showed a lower AUC both in vitro and in vivo than crystalline CCX. For crystalline CCX and…
Influence of Polymer Molecular Weight on Drug–polymer Solubility: A Comparison between Experimentally Determined Solubility in PVP and Prediction Derived from Solubility in Monomer
ABSTRACT: In this study, the influence of polymer molecular weight on drug–polymer solubility was investigated using binary systems containing indomethacin (IMC) and polyvinylpyrrolidone (PVP) of different molecular weights. The experimental solubility in PVP, measured using a differential scanning calorimetry annealing method, was compared with the solubility calculated from the solubility of the drug in the liquid analogue N-vinylpyrrolidone (NVP). The experimental solubility of IMC in the low-molecular-weight PVP K12 was not significantly different from that in the higher molecular weight PVPs (K25, K30, and K90). The calculated solubilities derived from the solubility in NVP (0.31–0.32 …