0000000000068778
AUTHOR
Ana M. Mastral
The catalytic performance of mesoporous cerium oxides prepared through a nanocasting route for the total oxidation of naphthalene
Cerium oxides have been prepared by nanocasting of a mesoporous siliceous KIT-6. Through this synthesis method a partially ordered mesoporous structure, as demonstrated by several characterization techniques (N2 adsorption, XRD and HRTEM) has been obtained. Accordingly, very high surface areas have been achieved (up to 163 m2/g), despite using high calcination temperatures (550 °C). We have demonstrated that the aging temperature of the siliceous template is of outstanding importance, as this parameter is directly responsible for both the pore size and the surface area of the catalysts. In addition, whilst a low preparation temperature (40 °C) makes the further removal of the silica templat…
Deep oxidation of volatile organic compounds using ordered cobalt oxides prepared by a nanocasting route
Ordered Co3O4 with high surface area (until 173 m2/g) has been successfully obtained through a nanocasting route using mesoporous KIT-6 silica as a hard template and tested in the deep oxidation of a series of representative volatile organic compounds (VOCs): propane as a model of short chain alkane and toluene as a model of monoaromatic hydrocarbon. It has been demonstrated that the catalytic activity for VOC deep oxidation is very elevated and its catalytic stability at moderate temperatures very good. However, the role of the ordered structure in the catalytic performance does not seem to be beneficial. The enhanced catalytic activity has been explained in terms of both the high surface …
Oxygen defects: The key parameter controlling the activity and selectivity of mesoporous copper-doped ceria for the total oxidation of naphthalene
Mesoporous CeO2 modified by the addition of copper has shown high efficiency for the total oxidation of naphthalene. High activity and 100% selectivity to carbon dioxide throughout the whole range of temperatures studied were achieved for copper loadings of 3.6% and lower. The catalytic behaviour has been related to the concentration of surface oxygen defects. A clear correlation between the concentration of surface oxygen defects (determined by XPS and DRIFTS) and the catalytic performance has been identified. Catalytic activity increased as copper was incorporated into the ceria up to 3.6%. In this range of copper content the copper was incorporated into the cubic fluorite lattice of CeO2…
High activity mesoporous copper doped cerium oxide catalysts for the total oxidation of polyaromatic hydrocarbon pollutants
The doping of mesoporous ceria with copper significantly enhances activity for naphthalene total oxidation, the enhanced performance is controlled by the increased concentration of surface oxygen defects.
Deep oxidation of pollutants using gold deposited on a high surface area cobalt oxide prepared by a nanocasting route.
Gold deposited on a cobalt oxide with high surface area (138 m2 g−1), obtained through a nanocasting route using a siliceous KIT-6 mesoporous material as a hard template, has demonstrated high activity for the total oxidation of propane and toluene, and ambient temperature CO oxidation. The addition of gold promotes the activity when compared to a gold-free Co3O4 catalyst prepared using the same nanocasting technique. The enhanced catalytic activity when gold is present has been explained for the deep oxidation of propane and toluene in terms of the improved reducibility of cobalt oxide when gold is added, rather than to the intrinsic activity of metallic gold particles. The improved behavi…
Influence of the preparation method on the activity of ceria zirconia mixed oxides for naphthalene total oxidation
Cerium/zirconium mixed oxides, with different Ce/Zr ratios, have been synthesised by a co-precipitation method using two different precipitating agents (sodium carbonate and urea) and tested for the total oxidation of naphthalene. Catalysts were characterized by N2 adsorption, XRD, Raman, TPR, XPS and DRIFTS. Ceria prepared by carbonate precipitation had low activity and this is likely to be related to the high concentration of residual surface carbonate that covers catalytic sites and inhibits reaction. For carbonate precipitation, increasing the Zr content to 1% resulted in a significant increase of activity, which is related to the decrease of surface carbonate. Increasing the Zr content…
Total oxidation of naphthalene with high selectivity using a ceria catalyst prepared by a combustion method employing ethylene glycol.
Abstract During the catalytic combustion of naphthalene, compounds other than CO 2 are often obtained. These products, as polymerized polycyclic aromatic hydrocarbons, oxygenated aromatic compounds and benzene derivate compounds, are usually more toxic than naphthalene. At the present work it is shown a nanocrystalline cerium oxide prepared by a combustion method employing a proper ethylene glycol concentration that exhibits very high activity in the decomposition of naphthalene in the presence of air and, most importantly, a selectivity value towards CO 2 of 100% for any range of conversions and/or temperatures used. In addition, it has been demonstrated that the amount of ethylene glycol …