0000000000070476

AUTHOR

Matilde Pietrafesa

showing 14 related works from this author

Implementing the sustainable energy (and climate) action plans: quasi-steady state or dynamic building modeling approach?

2020

Actions contemplated in Sustainable Energy (and Climate) Action Plans (SEAPs), which municipalities adhering to the EU initiative called “The Covenant of Mayors” are required to prepare, regard many sectors, among which are buildings. To implement such plans, it is necessary to make use of methods for predicting energy use in buildings. Technicians involved in this tend to adopt easy-touse simulation models because of the common mid-level expertise of the offices involved. However, such simplified methods could result in a less accurate evaluation of the energy demand of buildings. In this paper the suitability of the quasi-steady state and the dynamic approach, in the frame of these new ur…

Settore ING-IND/11 - Fisica Tecnica AmbientaleSustainable Energy (and Climate) Action Plans (SEAPs)energy efficiency.dynamic methodquasi steady-state methodBuilding energy modeling
researchProduct

Reduced weather data for building climatization and application to 29 European locations

1995

Abstract A method for setting up a reference year of reduced temperature data, proposed by Klein and Erbs, has been applied by us to 29 European locations for which an official test-reference year is available. This reference year of reduced temperatures may be utilized in computer programs for analysis of the thermal behaviour of buildings. The effectiveness of the method has been tested by calculating the annual energy demand in 29 European locations for three modules with different thermophysical characteristics.

Energy demandMeteorologybusiness.industryMechanical EngineeringBuilding and ConstructionPollutionIndustrial and Manufacturing Engineeringbuilding climatisationGeneral EnergyClimatic dataWeather dataEnvironmental scienceElectrical and Electronic EngineeringTelecommunicationsbusinessCivil and Structural EngineeringEnergy
researchProduct

Suitability of Some Existing Damage Indexes for Regulating Contracts Between Curators of Museums and HVAC Maintenance and Management Companies

2018

Heating, Ventilating and Air-Conditioning (HVAC) systems in museums are called to properly control important microclimate parameters, not only for visitors’ wellbeing, but mostly for works of art preservation. Accordingly, in case of interruptions occurring to HVAC systems, due to maintenance interventions or drawbacks, it is essential to guarantee the shortest possible period of disservice to which possible damages for the works of art are related. In this regard the aim of this work is to introduce a protocol to follow to support curators in regulate the stipulation of contracts with external companies for a more effective management and maintenance of the HVAC systems in order to preserv…

Works of art preservationEconomic impactSettore ING-IND/11 - Fisica Tecnica AmbientaleEnvironmental conditionMuseumHVAC management and maintenance service contractRisk Indice
researchProduct

An Anthropometric Analysis of Seated and Standing People

2012

Thermal radiative exchanges of the human body with surrounding surfaces play an essential role in describing the thermal conditions of people in a given environment. Moreover, they could be induced by, among other causes, the presence of high intensity radiant sources, like lighting spots or infrared heating panels. This implies that a suitable set of radiation data related to human body anthropometry is required. This set of data mainly comprises the body surface area, the clothing area factor, the effective radiation area factor, and projected area factors. Several analytical or experimental methods may be utilized in order to compute these parameters. A detailed description of the most c…

Body surface areaeducation.field_of_studyDry Heat Exchanges clothing area factor effective radiation area factor projected area factors southern Italy.Settore ING-IND/11 - Fisica Tecnica Ambientalebusiness.industrySample (material)PopulationAnthropometryClothingStatisticsProjected areaRadiative transferEnvironmental scienceeducationSet (psychology)business
researchProduct

Effect of the thermal storage dimensions on the performances of solar photovoltaic-thermal systems

2020

Abstract PV/T panels are innovative systems increasingly used in the building sector. As a matter of fact, in that context they allow a set of common problems to be addressed and often solved: lack of physical space and economic issues, always existing when PV and thermal panels are to be installed separately. Obviously, the main objective of PV/T panels is to enhance the electrical efficiency by cooling the PV cells, but the side positive effect is also the production of thermal energy, which can be suitably exploited with a proper configuration of the whole system and an appropriate design of its components. Their energy production and overall efficiency depend on several factors and ther…

Settore ING-IND/11 - Fisica Tecnica Ambientale060102 archaeologyRenewable Energy Sustainability and the Environmentbusiness.industryComputer science020209 energyPhotovoltaic systemContext (language use)06 humanities and the arts02 engineering and technologyThermal energy storageSolar energyAutomotive engineeringSolar energyStorage tankThermalPhotovoltaic-thermal (PV/T) systemThermal storage0202 electrical engineering electronic engineering information engineering0601 history and archaeologybusinessElectrical efficiencyThermal energyRenewable Energy
researchProduct

Insulating Building Components Made from a Mixture of Waste and Vegetal Materials: Thermal Characterization of Nine New Products

2021

Nowadays, energy efficiency and sustainability are the fulcra of building policies. These policies promote the use of new technologies and materials that can reduce the primary energy involved and the environmental costs of construction, guarantying at the same time a high level of comfort for the building’s occupants. Synergy between previous construction techniques and the use of new materials should be pursued by employing materials with a low environmental impact and optimal thermal insulation properties. Within this framework, new materials derived from the agriculture sector, and waste or recycling products from the industrial/agricultural sectors have been studied. The aim of this pa…

Settore ING-IND/11 - Fisica Tecnica AmbientaleThermal conductivity measurementEnvironmental effects of industries and plantsRenewable Energy Sustainability and the EnvironmentGeography Planning and DevelopmentTJ807-830vegetal materialManagement Monitoring Policy and LawTD194-195thermal conductivity measurements; building envelope sustainability; waste material; vegetal material; environmentally friendly compositesRenewable energy sourceswaste materialEnvironmental sciencesbuilding envelope sustainabilitythermal conductivity measurementsGE1-350environmentally friendly compositesSustainability; Volume 13; Issue 24; Pages: 13820
researchProduct

People comfort and artwork saving in museums: comparing indoor requisites

2009

In museums, environmental indoor conditions should, contemporaneously, preserve the exhibited works of art and ensure the comfort conditions for people. Unfortunately, human and artworks requirements are characterised by different values of the physical indoor parameters that, occasionally, could become conflicting. In the paper, these problems are addressed by means of a literature analysis, with a specific attention to thermal comfort conditions of people. The possibility of finding common ranges of values for both requisites is finally discussed. Some recent technical recommendations on the matter have also been considered for indicating some HVAC equipment and appliances to be adopted i…

Architectural engineeringEngineeringSettore ING-IND/11 - Fisica Tecnica Ambientalecomfort indoorbusiness.industrymuseum buildingThermal comfortworks of art conservationmicroclimatic parameterslaw.inventionConservationlawAir conditioningVentilation (architecture)HVACbusinessInternational Journal of Sustainable Design
researchProduct

A model for managing and evaluating solar radiation for indoor thermal comfort

2007

Thermal comfort of people occupying indoor spaces depends, to a large extent, on the direct component of solar radiation incident on the human body. In turn, even the diffuse component of the solar radiation could affect the thermal sensations of people. Despite this evidence, at the present there is a lack in the availability of simple and reliable methods capable of taking into account the influence of the solar radiation on thermal balance in the human body. In this work a comprehensive method is presented for the computation of the mean radiant temperature of people in thermal moderate indoor environments in the presence of solar radiation. The effects produced on the amount of solar ra…

Direct componentRenewable Energy Sustainability and the EnvironmentThermalEvaluation methodsThermal comfortEnvironmental scienceGeneral Materials ScienceMean radiant temperatureRadiationThermal balanceAutomotive engineeringRemote sensing
researchProduct

An MAS-based subjective model for indoor adaptive thermal comfort

2015

The achievement of high level personalized sets of comfort parameters is contemplated within the more general context of the so-called smart buildings, where people, by means of the new communication technologies, become active actors to the process of the singling out and control of the best indoor conditions. This Dynamic Intelligence approach would usefully contribute to a better energy efficient and environmental friendly management of buildings. Multi-Agent schemes are suitable tools in this aim, since they are able to manage the user-building-plant system where the adaptivity of people to the indoor conditions is suitably achieved. In this paper a contribution to a development of the …

Fluid Flow and Transfer ProcessesEngineeringArchitectural engineeringSettore ING-IND/11 - Fisica Tecnica AmbientaleEnvironmental Engineeringbusiness.industryProcess (engineering)Thermal Comfort Subjective and Adaptive Approach Multi-Agent Systems Adaptive FactorsControl (management)Thermal comfortContext (language use)Building and ConstructionbusinessBuilding automationScience and Technology for the Built Environment
researchProduct

Angle Factors and Projected Area Factors for Comfort Analysis of Subjects in Complex Confined Enclosures: Analytical Relations and Experimental Resul…

2008

This paper addresses an important problem in the evaluation of the thermal comfort of people living or working in the sort of confined spaces typical of current architecture. In the details, a new algorithm is proposed for the evaluation of the angle factors of people within rooms characterized by complex shapes, where the envelope components are not always mutually orthogonal. The algorithm is based on field data obtained by means of an experimental photographic apparatus which allows measurements of projected area factors of seated or standing people in such complex confined environments.

EngineeringSettore ING-IND/11 - Fisica Tecnica AmbientaleProjected area factorbusiness.industryField dataAcousticsBuilding complex geometriePublic Health Environmental and Occupational HealthThermal comfortAngle factorThermal comfortField analysisProjected areasortbusinessConfined spaceSimulationField analysisEnvelope (motion)Indoor and Built Environment
researchProduct

Suitability of some existing damage indexes for assessing agreements in maintenance and management of museum climatization systems

2020

Heating, Ventilating and Air-Conditioning systems in museums are called to properly control important microclimate parameters, not only for visitors’ wellbeing, but mostly for the preservation of works of art. Accordingly, in case of interruptions to Heating, Ventilating and Air-Conditioning systems, due to maintenance interventions or drawbacks, it is essential to guarantee the acceptable break from service to which possible damages for the works of art are related. In this regard, the aim of this work is to introduce a simple indicator to support curators in regulating the stipulation of contracts with external companies, a more effective management and maintenance of the Heating, V…

Management and maintenance service contractSettore ING-IND/11 - Fisica Tecnica Ambientalelcsh:TRenewable Energy Sustainability and the EnvironmentEnvironmental conditionHeating ventilating and air-conditioningventilating and air-conditioning management and maintenance service contractEnergy Engineering and Power TechnologyheatingEnvironmental Science (miscellaneous)Environmental economicslcsh:Technologylcsh:HD72-88environmental conditionslcsh:Economic growth development planningWorks of art preservationeconomic cost.risk indexesEconomic costRisk indexeMuseumEconomic costBusinessmuseumsWater Science and Technology
researchProduct

Assessment of the mean radiant temperature in urban areas: methods at comparison

2018

Mean radiant temperature may play a pivotal role in the assessment of the outdoor environmental conditions in urban areas. However, its assessment in urban settings is not a simple task owing to the presence of complex and articulated environment and of solar radiation. The article aims to perform a comparison among the results yielded by different methods: the globe-thermometer method, and the six-directional technique. The scope of such a survey is an analysis of the actual appropriateness of the more practical, albeit less accurate, globe-thermometer method to outdoor environments. Furthermore, an analytical model, previously elaborated by the authors and here modified to make it applica…

Settore ING-IND/11 - Fisica Tecnica AmbientaleOutdoor environment mean radiant temperature solar radiation urban planning
researchProduct

Tunnel fire active protection: improving ventilation system

2019

Abstract The main aim of this work is to evaluate how the use of an active protection method, consisting in an improved forced longitudinal ventilation system, can determine a positive impact on heat extraction and people evacuation time in a tunnel fire scenario, by considering a case study which simulations are based on a real gallery.

HistoryFDS modellingSettore ING-IND/11 - Fisica Tecnica AmbientaleTunnel fire safetyComputational Fluid Dynamicventilation systemAutomotive engineeringComputer Science ApplicationsEducationlaw.invention'Active' protectionlawVentilation (architecture)Environmental science
researchProduct

A generalized model of human body radiative heat exchanges for optimal design of indoor thermal comfort conditions

2018

Abstract Human thermal sensation depends heavily on radiative exchanges between the human body and the surrounding environment. Because these exchanges play a crucial role in the thermal balance of the human body, about 35% of the process, human thermal sensation should draw the attention of planners when designing both indoor environments and equipment. The present study aims to contribute to this field by proposing a procedure for delineating the optimal comfort conditions for occupants in most of the articulate and realistic configurations of actual indoor environments. Specifically, this procedure enables accurate assessment of the radiant field surrounding a subject in a given indoor r…

Optimal designThermal comfort Radiative exchange Projected area factors View factorsSettore ING-IND/11 - Fisica Tecnica AmbientaleRenewable Energy Sustainability and the Environmentbusiness.industryComputer science020209 energyProcess (computing)Thermal comfort02 engineering and technologyAir conditioningThermal radiationLimit (music)Thermal0202 electrical engineering electronic engineering information engineeringRadiative transferGeneral Materials SciencebusinessSimulation
researchProduct