0000000000072857
AUTHOR
Konrad Kandler
Climatology of the average water-soluble volume fraction of atmospheric aerosol
The average water-soluble volume fraction of atmospheric aerosol particles was inferred from measurements at three different locations across Central Europe. Together with a comprehensive literature review these data sets are classified into four aerosol types. The classified data are parameterized as a function of particle size using a logarithmic normal distribution function, which seems most appropriate to represent the hygroscopicity maximum in the accumulation size range. This parameterization can be used as a simplified input parameter for various model calculations. In addition, a summary on water-soluble volume fractions and hygroscopic growth factors is presented along with a short…
Dust mobilization and transport in the northern Sahara during SAMUM 2006 – a meteorological overview
The SAMUM field campaign in southern Morocco in May/June 2006 provides valuable data to study the emission, and the horizontal and vertical transports of mineral dust in the Northern Sahara. Radiosonde and lidar observations show differential advection of air masses with different characteristics during stable nighttime conditions and up to 5-km deep vertical mixing in the strongly convective boundary layer during the day. Lagrangian and synoptic analyses of selected dust periods point to a topographic channel from western Tunisia to central Algeria as a dust source region. Significant emission events are related to cold surges from the Mediterranean in association with eastward passing upp…
Bulk composition of northern African dust and its source sediments — A compilation
Abstract This paper presents a review of bulk compositional data of northern African dust and its potential source sediments and includes elemental, isotope and mineralogical data. Northern African dust represents about one half of the total global atmospheric mineral dust burden, and its uplift, transport and deposition have strong impacts on climate and various terrestrial and marine ecosystems. The chemical data set shows, that an ‘average northern African dust’ exhibits comparable Si, Fe and Mn contents with respect to the average composition of the upper continental crust, is slightly depleted in the alkali metals K and Na, and enriched in Ti and P. However, the complete data set yield…
State of mixing, shape factor, number size distribution, and hygroscopic growth of the Saharan anthropogenic and mineral dust aerosol at Tinfou, Morocco
The Saharan Mineral Dust Experiment (SAMUM) was conducted in May and June 2006 in Tinfou, Morocco. A H-TDMA system and a H-DMA-APS system were used to obtain hygroscopic properties of mineral dust particles at 85% RH. Dynamic shape factors of 1.11, 1.19 and 1.25 were determined for the volume equivalent diameters 720, 840 and 960 nm, respectively. During a dust event, the hydrophobic number fraction of 250 and 350 nm particles increased significantly from 30 and 65% to 53 and 75%, respectively, indicating that mineral dust particles can be as small as 200 nm in diameter. Log-normal functions for mineral dust number size distributions were obtained from total particle number size distributio…
Chemical analysis of refractory stratospheric aerosol particles collected within the arctic vortex and inside polar stratospheric clouds
Abstract. Stratospheric aerosol particles with diameters larger than about 10 nm were collected within the arctic vortex during two polar flight campaigns: RECONCILE in winter 2010 and ESSenCe in winter 2011. Impactors were installed on board the aircraft M-55 Geophysica, which was operated from Kiruna, Sweden. Flights were performed at a height of up to 21 km and some of the particle samples were taken within distinct polar stratospheric clouds (PSCs). The chemical composition, size and morphology of refractory particles were analyzed by scanning electron microscopy and energy-dispersive X-ray microanalysis. During ESSenCe no refractory particles with diameters above 500 nm were sampled. I…
Individual-particle analysis of airborne dust samples collected over Morocco in 2006 during SAMUM 1
During the course of SAMUM 1 in May and June 2006, airborne samples were collected in southern Morocco at altitudes between 830 and 3340 m above ground. We analysed approximately 22 500 particles of 1–30 μm by automated individual-particle analysis with a scanning electron microscope (SEM) and an energy-dispersive X-ray (EDX) analyser. The major difference between samples is due to the presence and amount of chlorine- and sulphur-bearing particles, pointing to a varying maritime influence and to different degrees of aging. In contrast, the desert dust component is very homogeneous independent of altitude, activated local source area, and dust storm intensity, implying very fast mixing of th…
Electron microscopy of particles collected at Praia, Cape Verde, during the Saharan Mineral Dust Experiment: particle chemistry, shape, mixing state and complex refractive index
A large field experiment of the Saharan Mineral Dust Experiment (SAMUM) was performed in Praia, Cape Verde, in January and February 2008. The aerosol at Praia is a superposition of mineral dust, sea-salt, sulphates and soot. Particles smaller than 500 nm are mainly mineral dust, mineral dust–sulphate mixtures, sulphates and soot–sulphate mixtures. Particles larger then 2.5 μm consist of mineral dust, sea-salt and few mineral dust–sulphate mixtures. A transition range exists in between. The major internal mixtures are mineral dust–sulphate and soot–sulphate. Mineral dust–sea-salt mixtures occur occasionally, mineral dust–soot mixtures were not observed. The aspect ratio was 1.3–1.4 for dry p…
Enhancements of the refractory submicron aerosol fraction in the Arctic polar vortex: feature or exception ?
In situ measurements with a four-channel stratospheric condensation particle counter (CPC) were conducted at up to 20 km altitude on board the aircraft M-55 Geophysica from Kiruna, Sweden, in January through March (EUPLEX 2003, RECONCILE 2010) and in December (ESSenCe 2011). During all campaigns air masses from the upper stratosphere and mesosphere were subsiding inside the Arctic winter vortex, thus initializing a transport of refractory aerosol into the lower stratosphere (Θ 3 were generally detected. Up to 8 of these 11 particles per cm3 were found to contain thermo-stable (at 250 °C) residuals with diameters of 10 nm to about 1 μm. Particle mixing ratios (150 mg−1) and fractions of non-…
Chemical composition and complex refractive index of Saharan Mineral Dust at Izaña, Tenerife (Spain) derived by electron microscopy
Abstract Samples from two strong homogeneous dust plumes from the Saharan desert reaching Izana (Tenerife, Spain) in July and August 2005 were taken with a miniature impactor system and filter samplers. Size, aspect ratio and chemical composition of more than 22,000 individual particles were studied by scanning electron microscopy. The mineralogical phase composition of about 200 particles was investigated by transmission electron microscopy. In addition, the aerosol size distribution was measured with an optical particle spectrometer. In all samples, the aerosol was dominated by mineral dust with an average composition (by volume) of 64% silicates, 6% quartz, 5% calcium-rich particles, 14%…
Saharan dust absorption and refractive index from aircraft-based observations during SAMUM 2006
During the Saharan Mineral Dust Experiment (SAMUM) conducted in summer 2006 in southeast Morocco, the complex refractive index of desert dust was determined from airborne measurements of particle size distributions and aerosol absorption coefficients at three different wavelengths in the blue (467 nm), green (530 nm) and red (660 nm) spectral regions. The vertical structure of the dust layers was analysed by an airborne high spectral resolution lidar (HSRL). The origin of the investigated dust layers was estimated from trajectory analyses, combined with Meteosat 2nd Generation (MSG) scenes and wind field data analyses. The real part n of the dust refractive index was found almost constant w…
Ground-based off-line aerosol measurements at Praia, Cape Verde, during the Saharan Mineral Dust Experiment: microphysical properties and mineralogy
A large field experiment of the Saharan Mineral Dust Experiment (SAMUM) was performed in Praia, Cape Verde, in January and February 2008. This work reports on the aerosol mass concentrations, size distributions and mineralogical composition of the aerosol arriving at Praia. Three dust periods were recorded during the measurements, divided by transitional periods and embedded in maritime-influenced situations. The total suspended particle mass/PM 10 /PM 2.5 were 250/180/74 μg/m 3 on average for the first dust period (17–21 January) and 250/230/83 μg/m 3 for the second (24–26 January). The third period (28 January to 2 February) was the most intensive with 410/340/130 μg/m 3 . Four modes were…
Single-particle characterization of ice-nucleating particles and ice particle residuals sampled by three different techniques
Abstract. In the present work, three different techniques to separate ice-nucleating particles (INPs) as well as ice particle residuals (IPRs) from non-ice-active particles are compared. The Ice Selective Inlet (ISI) and the Ice Counterflow Virtual Impactor (Ice-CVI) sample ice particles from mixed-phase clouds and allow after evaporation in the instrument for the analysis of the residuals. The Fast Ice Nucleus Chamber (FINCH) coupled with the Ice Nuclei Pumped Counterflow Virtual Impactor (IN-PCVI) provides ice-activating conditions to aerosol particles and extracts the activated particles for analysis. The instruments were run during a joint field campaign which took place in January and …
Ice nucleation properties of the most abundant mineral dust phases
[1] The ice nucleation properties of the nine most abundant minerals occurring in desert aerosols (quartz, albite, microcline, kaolinite, montmorillonite, illite, calcite, gypsum, and hematite) were investigated by environmental scanning electron microscopy (ESEM). In this instrument, the pure minerals are exposed to water vapor at variable pressures and temperatures. The crystallization of ice on the mineral particles is observed by secondary electron imaging, and the supersaturation for an activated particle fraction of 1–3% is determined as function of temperature. In all experiments, condensation of water prior to ice formation was not observed within detectable limits, even at water su…
Regional Saharan dust modelling during the SAMUM 2006 campaign
The regional dust model system LM-MUSCAT-DES was developed in the framework of the SAMUM project. Using the unique comprehensive data set of near-source dust properties during the 2006 SAMUM field campaign, the performance of the model system is evaluated for two time periods in May and June 2006. Dust optical thicknesses, number size distributions and the position of the maximum dust extinction in the vertical profiles agree well with the observations. However, the spatio-temporal evolution of the dust plumes is not always reproduced due to inaccuracies in the dust source placement by the model. While simulated winds and dust distributions are well matched for dust events caused by dry syn…
Hygroscopic properties and water-soluble volume fraction of atmospheric particles in the diameter range from 50 nm to 3.8 μm during LACE 98
[1] Hygroscopic properties of atmospheric aerosol particles in the Aitken, large, and giant particle range were studied during the Lindenberg Aerosol Characterization Experiment (LACE 98) in a rural area 80 km southeast of Berlin. The hygroscopic behavior of Aitken particles were determined in situ in four size classes (50, 100, 150, 250 nm) with a Hygroscopic Tandem Differential Mobility Analyzer for relative humidities (RH) of 60% and 90%. Measurements at 60% RH served as reference data used by other LACE 98 investigators for mass closure and radiative transfer calculations. In most cases, at 90% RH, the atmospheric particles could be classified into two groups (“more” and “less” hygrosco…
A comprehensive laboratory study on the immersion freezing behavior of illite NX particles: a comparison of 17 ice nucleation measurement techniques
Immersion freezing is the most relevant heterogeneous ice nucleation mechanism through which ice crystals are formed in mixed-phase clouds. In recent years, an increasing number of laboratory experiments utilizing a variety of instruments have examined immersion freezing activity of atmospherically relevant ice-nucleating particles. However, an intercomparison of these laboratory results is a difficult task because investigators have used different ice nucleation (IN) measurement methods to produce these results. A remaining challenge is to explore the sensitivity and accuracy of these techniques and to understand how the IN results are potentially influenced or biased by experimental param…
Dust mobilization due to density currents in the Atlas region: Observations from the Saharan Mineral Dust Experiment 2006 field campaign
[1] Evaporation of precipitation is a ubiquitous feature of dry and hot desert environments. The resulting cooling often generates density currents with strong turbulent winds along their leading edges, which can mobilize large amounts of dust. Mountains support this process by triggering convection, by downslope acceleration of the cool air, and by fostering the accumulation of fine-grained sediments along their foothills through the action of water. For the Sahara, the world's largest dust source, this mechanism has been little studied because of the lack of sufficiently high resolution observational data. The present study demonstrates the frequent occurrence of density currents along th…
Global aerosol modeling with MADE3 (v3.0) in EMAC (based on v2.53): model description and evaluation
Recently, the aerosol microphysics submodel MADE3 (Modal Aerosol Dynamics model for Europe, adapted for global applications, third generation) was introduced as a successor to MADE and MADE-in. It includes nine aerosol species and nine lognormal modes to represent aerosol particles of three different mixing states throughout the aerosol size spectrum. Here, we describe the implementation of the most recent version of MADE3 into the ECHAM/MESSy Atmospheric Chemistry (EMAC) general circulation model, including a detailed evaluation of a 10-year aerosol simulation with MADE3 as part of EMAC. We compare simulation output to station network measurements of near-surface aerosol component mass con…
Particle chemical properties in the vertical column based on aircraft observations in the vicinity of Cape Verde Islands
During the second Saharan Mineral Dust Experiment (SAMUM-2) field campaign, particles with geometric diameters (d) between ∼0.1 and 25 μm were collected on board of the Deutsches Zentrum für Luft- und Raumfahrt (German Aerospace Center, DLR) Falcon aircraft. Size, chemical composition and mixing state of aerosols sampled (spatially and vertically resolved) along the West African coastline and in the Cape Verde Islands region were determined by electron microscopy. A pronounced layer structure of biomass-burning aerosol and desert dust was present for all days during the sampling period from 23 January to 6 February. The aerosol composition of the small particles (d < 0.5 μm) was highly v…
Size distribution, mass concentration, chemical and mineralogical composition and derived optical parameters of the boundary layer aerosol at Tinfou, Morocco, during SAMUM 2006
During the SAMUM 2006 field campaign in southern Morocco, physical and chemical properties of desert aerosols were measured. Mass concentrations ranging from 30 Ã�¼g m-3 for PM2.5 under desert background conditions up to 300,000 Ã�¼g m-3 for total suspended particles (TSP) during moderate dust storms were measured. TSP dust concentrations are correlated with the local wind speed, whereas PM10 and PM2.5 concentrations are determined by advection from distant sources. Size distributions were measured for particles between 20 nm and 500 Ã�¼m diameter (parameterizations are given). Two major regimes of the size spectrum can be distinguished. Smaller than 500 nm particle diameter, the distrib…
Solar radiative effects of a Saharan dust plume observed during SAMUM assuming spheroidal model particles
The solar optical properties of Saharan mineral dust observed during the Saharan Mineral Dust Experiment (SAMUM) were explored based on measured size-number distributions and chemical composition. The size-resolved complex refractive index of the dust was derived with real parts of 1.51–1.55 and imaginary parts of 0.0008–0.006 at 550 nm wavelength. At this spectral range a single scattering albedo ω o and an asymmetry parameter g of about 0.8 were derived. These values were largely determined by the presence of coarse particles. Backscatter coefficients and lidar ratios calculated with Mie theory (spherical particles) were not found to be in agreement with independently measured lidar data.…
Recent progress in understanding physical and chemical properties of African and Asian mineral dust
International audience; This paper presents a review of recently acquired knowledge on the physico-chemical properties of mineral dust from Africa and Asia based on data presented and discussed during the Third International Dust Workshop, held in Leipzig (Germany) in September 2008. Various regional field experiments have been conducted in the last few years, mostly close to source regions or after short-range transport. Although significant progress has been made in characterising the regional variability of dust properties close to source regions, in particular the mineralogy of iron and the description of particle shape and mixing state, difficulties remain in estimating the range of va…
In situ measurements of optical properties at Tinfou (Morocco) during the Saharan Mineral Dust Experiment SAMUM 2006
In situ measurements of optical and physical properties of mineral dust were performed at the outskirts of the Saharan Desert in the framework of the Saharan Mineral Dust Experiment part 1 (SAMUM-1). Goals of the field study were to achieve information on the extent and composition of the dust particle size distribution and the optical properties of dust at the ground. For the particle number size distribution, measured with a DMPS/APS, a size dependent dynamic shape factor was considered. The mean refractive index of the particles in this field study is 1.53–4.1 × 10 -3 i at 537 nm wavelength and 1.53–3.1 × 10 -3 i at 637 nm wavelength derived from measurements of scattering and absorption…
Airborne measurements of dust layer properties, particle size distribution and mixing state of Saharan dust during SAMUM 2006
The Saharan Mineral Dust Experiment (SAMUM) was conducted in May/June 2006 in southern Morocco. As part of SAMUM, airborne in situ measurements of the particle size distribution in the diameter range 4 nm < Dp < 100 μm were conducted. The aerosol mixing state was determined below Dp < 2.5 μm. Furthermore, the vertical structure of the dust layers was investigated with a nadir-looking high spectral resolution lidar (HSRL). The desert dust aerosol exhibited two size regimes of different mixing states: below 0.5 μm, the particles had a non-volatile core and a volatile coating; larger particles above 0.5 μm consisted of non-volatile components and contained light absorbing material. In…
Composition and mixing state of the urban background aerosol in the Rhein-Main area (Germany)
Abstract Size-resolved aerosol particle samples in the size range 0.1–10 μm aerodynamic diameter were collected in the years 2003 and 2004 at an urban background station in Mainz, Germany. Size, morphology, chemical composition and mixing state of more than 5400 individual particles of 7 selected sampling days were analyzed in detail by scanning electron microscopy and energy-dispersive X-ray microanalysis. In addition, transmission electron microscopy, aerosol mass spectrometry and atomic force microscopy were applied to obtain detailed information about the mixing state of the particles. The fine particle fraction (diameter 1 μm diameter) is strongly dependant on air mass history with var…