0000000000074137
AUTHOR
Nicolae Rosca
Experimental studies on uniaxial and echibiaxial tensile tests applied to plastic materials sheets
Abstract The main objective of this paper is to determine the behavior of few plastic materials using two different type of tests. We use classical uniaxial tensile test to determine the most important mechanical and elastic characteristics, such as: yield stress, Young modulus, tangent modulus, maximum stress and maximum strain and to plot engineering stress vs. engineering strain curve for these materials. The second test, that was used in this study, was echibiaxial tensile test on the spherical punch. This test was used to determine maximum breaking force and, of course maximum displacement of specimen on punch direction and others few important characteristics, such as: major and minor…
Numerical-Experimental Study Regarding the Single Point Incremental Forming Process
The present paper proposes a numerical-experimental comparative study on the single point incremental forming process. A DC04 steel sheet with a thickness of 0.6 mm was used for both the numerical simulation using the finite element method and the experimental research. The type of trajectory used was a spiral trajectory and the finished part obtained was a truncated cone-shaped part. The analysis program used for simulation was Ls-Dyna. The simulations were performed in several variants: with a fixed mesh and with an adaptive mesh, using two different element formulations: 25 (Belytschko-Tsay formulation with thickness stretch) and -16 (fully integrated shell element modified for higher ac…
Optical study for springback prediction, thickness reduction and forces variations on single point incremental forming
Abstract The goal of the present work is to present an experimental study regarding the influence of the main technological influence factors such as the vertical step and the punch diameter on the single point incremental forming process (SPIF). In this paper we estimate the influence of these two factors on springback, thickness reduction and forces. Both parameters were varied on two levels: (d) punch diameter 6 and 10 mm and (s) vertical step 0,1 and 0,5 mm. The experiments were done on experimental layout composed by a robot, a clamping system that contains the die’s lower part and the optical system.
Experimental Study Regarding PA and PE Sheets on Single Point Incremental Forming Process
The present paper aims to present an experimental study on the behaviour of PA and PE sheets during the single point incremental forming. Due to the fact that the purpose of this research is to study the behaviour of PA and PE sheets during the single point incremental process both in terms of process forces and in terms of major and minor strain and thickness reduction, a Kuka Kr210 robot was chosen as an alternative to using a universal milling machine. The specimens were made of 3 mm PA and PE sheets. The size of the sheets was 250 mm x 250 mm. The forces measured on the three directions of the coordinate axes were compared. To measure the major strain, minor strain and thickness reducti…