showing 37 related works from this author
Evaluating the Effects of the Rill Longitudinal Profile on Flow Resistance Law
2022
In this paper, for the first time, the effect of the longitudinal profile shape of the rill (uniform, concave, and convex) on flow resistance law was studied. The first part of the paper is based on a theoretical equation to estimate the Darcy–Weisbach friction factor f, deduced from the power velocity distribution and rill measurements performed on a plot. At first, the equation to estimate the Γ parameter of the velocity profile was calibrated using all available measurements. Then an analysis of the hydraulic characteristics at reach scale, for comparable values of discharge, was carried out, comparing the different profile shapes. To assess the influence of the rill profile …
Roughness effect on the correction factor of surface velocity for rill flows
2021
Flow velocity is one of the most important hydrodynamic variables for both channelized (rill and gullies) and interrill erosive phenomena. The dye tracer technique to measure surface flow velocity Vs is based on the measurement of the travel time of a tracer needed to cover a known distance. The measured Vs must be corrected to obtain the mean flow velocity V using a factor αv = V/Vs which is generally empirically deduced. The Vs measurement can be influenced by the method applied to time the travel of the dye-tracer and αv can vary in different flow conditions. Experiments were performed by a fixed bed small flume simulating a rill channel for two roughness conditions (sieved soil, gravel)…
Testing a theoretical resistance law for overland flow on a stony hillslope
2020
Overland flow, sediments, and nutrients transported in runoff are important processes involved in soil erosion and water pollution. Modelling transport of sediments and chemicals requires accurate estimates of hydraulic resistance, which is one of the key variables characterizing runoff water depth and velocity. In this paper, a new theoretical power–velocity profile, originally deduced neglecting the impact effect of rainfall, was initially modified for taking into account the effect of rainfall intensity. Then a theoretical flow resistance law was obtained by integration of the new flow velocity distribution. This flow resistance law was tested using field measurements by Nearing for the …
Analysis of rill step–pool morphology and its comparison with stream case
2021
In this paper, the morphology of step–pool features is analysed using rill measurements and literature data for streams. Close-range photogrammetry was used to carry out ground measurements on rills with step–pool units, shaped on a plot having slope equal to 14, 15, 22, 24 and 26%. Data were used to compare the relationships between H/L, in which H is the step height and L is the step length, and the mean gradient of the step–pool sequence, Sm, for streams or the slope of the step–pool unit, S, for rills. The relationship of H/L against Sm is widely used to test the occurrence of the maximum flow resistance condition in streams, which is associated with the range 1 ≤ (H/L)/Sm ≤ 2. Further …
On the variation of the correction factor of surface velocity with the measurement vertical for shallow flows over rough beds
2023
Considering that water flow energy affects the detachment of soil particles, the transport and deposit of the detached particles, the flow velocity is a key variable governing the soil erosion processes at the hillslope scale. The simple dye-tracer technique for measuring mean flow velocity can be applied in non-controlled field applications for which some measurement difficulties (e.g. due to sediment transport, and shallow flows) can occur. The correction factor is usually obtained as the ratio between the mean velocity, deriving from measurements of flow discharge and water depth, and surface velocity. Alternatively, the possibility of using the velocity profile in a given vertical to de…
Rill flow resistance law under sediment transport
2021
Abstract Purpose In this paper, a deduced flow resistance equation for open-channel flow was tested using measurements carried out in mobile bed rills with sediment-laden flows and fixed bed rills. The main aims were to (i) assess the effect of sediment transport on rill flow resistance, and (ii) test the slope-flow velocity relationship in fixed bed rills. Methods The following analysis was developed: (i) a relationship between the Γ function of the velocity profile, the rill slope and the Froude number was calibrated using measurements carried out on fixed bed rills; (ii) the component of Darcy-Weisbach friction factor due to sediment transport was deduced using the corresponding measurem…
A full‐scale study of Darcy‐Weisbach friction factor for channels vegetated by riparian species
2021
In this article, an open channel flow resistance equation, deduced applying dimensional analysis and incomplete self-similarity condition for the flow velocity distribution, was tested using measurements carried out in a full-scale channel equipped with three types of riparian plants (Salix alba L., Salix caprea L. and Alnus glutinosa L.). In the experimental channel, having banks lined with boulders, the vegetation branches were anchored in a concrete bottom. For each species, the measurements were carried out with plants having different amounts of leaves, different plant density and plant area index. The relationship between the scale factor Γ of the velocity profile and the Froude numbe…
New technique for measuring water depth in rill channels
2019
Abstract Water erosion is one of the most important soil degradation processes and rill erosion contribution to total soil loss is usually dominant as compared to interrill erosion. Rill erosion modelling requires that rill flow has to be adequately modelled. Flow depths in rills are typically of the order of millimeters to several centimeters and bed topography, characterized by steep slope values, significantly affects flow hydraulics. In this paper, a new technique for measuring the water depth inside a rill channel is proposed and the effects on flow resistance estimate are examined. This technique couples an accurate ground survey of the rill channel, obtained by close-range photogramm…
Deducing the stage-discharge relationship of rectangular broad and sharp-crested contraction devices
2023
Flumes with a local contraction of the channel width are a common way for accurately measuring the flow discharge. In this paper, the outflow process of rectangular broad and sharp-crested contraction devices is modeled using the dimensional analysis and the incomplete self-similarity condition. The proposed theoretical stage-discharge relationship is tested using measurements available in the literature. The proposed power equation is characterized by a value of the exponent close to 1.5 and a coefficient depending on the contraction ratio. The proposed flow-measuring flumes are characterized by a good accuracy of the measured discharge (ranging from -2.71 to 3.28% for the broad-crested co…
Experiments for testing soil texture effects on flow resistance in mobile bed rills
2018
Abstract In this paper a recently theoretically deduced rill flow resistance equation, based on a power-velocity profile, was tested experimentally on plots of varying slopes and soil texture in which mobile bed rills are incised. Measurements of flow velocity, water depth, cross section area, wetted perimeter and bed slope conducted in rill reaches incised on experimental plots, having different slope values (9, 14, 22, 24 and 26%) and soil texture (clay fraction ranging from 42 to 73%), and literature data were used to calibrate the flow resistance equation. In particular, the relationship between the velocity profile parameter Γ, the channel slope, the flow Froude number and texture frac…
A new approach for deducing the stage-discharge relationship of a triangular broad-crested device
2022
In this paper, the outflow process of a triangular broad-crested device is examined using the dimensional analysis and the incomplete self-similarity theory. A new theoretical stage-discharge relationship is proposed, and its applicability is verified using measurements available in literature. The proposed power equation is characterized by a coefficient depending on device apex angle and a constant value of the exponent.
Rill flow velocity and resistance law: A review
2022
Rills caused by runoff concentration on erodible hillslopes generally have very irregular longitudinal profiles and cross-section shapes. Rill erosion directly depends on the hydraulics of flow within the rills which may differ greatly from that in larger and regular channels like streams or rivers. At first, in this paper, a review of the two different approaches to estimate rill flow velocity, based on flow regime and flow resistance laws, is presented. Recent advances in measurements of rill geometry by the three-dimensional photo-reconstruction (3D-PR) technique, which allows one to obtain a Digital Terrain Model (DTM) by low-altitude aerial and terrestrial photogrammetry, are also disc…
Effects of Biochar Addition on Rill Flow Resistance
2021
The development of rills on a hillslope whose soil is amended by biochar remains a topic to be developed. A theoretical rill flow resistance equation, obtained by the integration of a power velocity distribution, was assessed using available measurements at plot scale with a biochar added soil. The biochar was incorporated and mixed with the arable soil using a biochar content BC of 6 and 12 kg m−2. The developed analysis demonstrated that an accurate estimate of the velocity profile parameter Гv can be obtained by the proposed power equation using an exponent e of the Reynolds number which decreases for increasing BC values. This result pointed out that the increase of biochar content dump…
Dye-tracer technique for rill flows by velocity profile measurements
2020
Abstract Water flow on hillslope soil surface supplies energy which is required to detach soil particles, to transport and deposit sediments, therefore flow velocity is a key variable related to hillslope hydrodinamics of soil erosion processes. Among the different methods available for measuring velocity of shallow interrill and rill flow, the trace technique is widely used. Trace technique is applied by adding a material (salt, magnetic material, water isotope, floating object) and then measuring the speed of the material to travel a known distance from the injection point. When flow velocity is measured using a dye-tracing method, the mean velocity is calculated by multiplying the measur…
Evaluating the Effects of Sediment Transport on Pipe Flow Resistance
2021
In this paper, the applicability of a theoretical flow resistance law to sediment-laden flow in pipes is tested. At first, the incomplete self-similarity (ISS) theory is applied to deduce the velocity profile and the corresponding flow resistance law. Then the available database of measurements carried out by clear water and sediment-laden flows with sediments having a quasi-uniform sediment size and three different values of the mean particle diameter Dm (0.88 mm, 0.41 mm and 0.30 mm) are used to calibrate the Γ parameter of the power-velocity profile. The fitting of the measured local velocity to the power distribution demonstrates that (i) for clear flow the exponent δ can be estimated b…
Measuring Rainfall Kinetic Power in Two Sicilian Experimental Areas by Drop-Size Distribution Data
2023
The rainfall kinetic energy, which affects soil erosion processes, can be calculated by the drop-size distribution (DSD) and falling velocity. This study presents the outcomes derived by the DSDs recorded with the same optical disdrometer in two experimental areas, located in Sicily (southern Italy). Specifically, the DSDs were recorded from March 2017 to December 2019 at Sparacia and from June 2006 to April 2014 at Palermo. The aims of this paper are both to compare the DSDs for the two sites and to evaluate the applicability of Gamma theoretical distribution. Moreover, the relations of rainfall kinetic power vs. rainfall intensity are assessed. Differences in DSDs, especially for rainfall…
Estimating flow resistance in steep slope rills
2021
Recent research recognized that the slope of 18% can be used to distinguish between the ‘gentle slope’ case and that of ‘steep slope’ for the detected differences in hydraulic variables (flow depth, velocity, Reynolds number, Froude number) and those representatives of sediment transport (flow transport capacity, actual sediment load). In this paper, using previous measurements carried out in mobile bed rills and flume experiments characterized by steep slopes (i.e., slope greater than or equal to 18%), a theoretical rill flow resistance equation to estimate the Darcy-Weisbach friction factor is tested. The main aim is to deduce a relationship between the velocity profile parameter Γ, the c…
Flow resistance law under suspended sediment laden conditions
2020
Abstract The uniform flow resistance equation, in the form due to Manning or Darcy-Weisbach, is widely applied to establish the stage-discharge relationship of a river cross-section. The application of this equation, namely the slope-area method, allows to indirectly measure the corresponding river discharge by measurements of bed slope, water level, cross-section area, wetted perimeter and an estimate of channel roughness. In this paper, a recently deduced flow resistance equation for open channel flow was tested during conditions of suspended sediment-laden flow. First, the flow resistance equation was determined by dimensional analysis and by applying the condition of incomplete self-sim…
Comment on “Rill erosion processes on steep colluvial deposit slope under heavy rainfall in flume experiments with artificial rain by F. Jiang et al.”
2020
Abstract Since rill flows are characterized by small water depths and steeply sloping channels, the corresponding hydraulic conditions are very different to those which are typically found in channels of streams and rivers. Furthermore, limited information is currently available on the effect of rainfall on flow resistance. The objective of this comment was to investigate the applicability of a recently theoretically deduced rill flow resistance equation, based on a power-velocity profile, using measurements carried out by Jiang et al. for both different slope steepness conditions and rainfall intensity. The relationship between the velocity profile parameter Γ, the channel slope and the fl…
Effects of Boulder Arrangement on Flow Resistance Due to Macro-Scale Bed Roughness
2023
Flow resistance in gravel-bed channels is not only affected by the shape and size of the roughness elements, but also by their arrangement on the channel bed surface (position to flow streamlines, spacing between elements, and their protrusion from the channel bed). Many investigations proved that open channel flow resistance can be obtained by integrating the power velocity profile. For a macro-scale roughness condition, this study aims to investigate the effect of different boulder arrangements on flow resistance. First, for each arrangement, the equation relating Γ function of the power velocity profile, the Froude number, and the channel slope was calibrated using available measur…
Flow resistance in mobile bed rills shaped in soils with different texture
2021
Rill erosion is considered one of the most important soil processes because of the large amount of soil loss due to the development of a rill network able to promote an efficient transport of both rill flow-detached particles and those delivered from the inter-rill areas. Rill flow experiments are useful to overcome the gap in rill hydraulics knowledge and to test the reliability of currently applied uniform open channel flow equations for mobile bed rills. In this paper the applicability of a theoretical flow resistance equation, based on a power-velocity profile, to rill channels shaped on soils having different textures was investigated. The measurements (437 runs) of water depth, cross-…
Comparing flow resistance law for fixed and mobile bed rills
2019
Rills caused by run-off concentration on erodible hillslopes have very irregular profiles and cross-section shapes. Rill erosion directly depends on the hydraulics of flow in the rills, which may differ greatly from hydraulics of flow in larger and regular channels. In this paper, a recently theoretically deduced rill flow resistance equation, based on a power–velocity profile, was tested experimentally on plots of varying slopes (ranging from 9% to 26%) in which mobile and fixed bed rills were incised. Initially, measurements of flow velocity, water depth, cross-section area, wetted perimeter, and bed slope, carried out in 320 reaches of mobile bed rills and in 165 reaches of fixed rills, …
Testing a theoretically-based overland flow resistance law by Emmett’s database
2021
Abstract The main aim of this paper was to test a recently theoretically deduced flow resistance equation, based on a power-velocity profile, using a wide database of available measurements carried out in laboratory and field experimental runs with overland flow under simulated rainfall. In comparison with previous calibrations and validations of this theoretically deduced flow resistance equation, the used database by Emmett is characterized by a wide range of rainfall intensities (from 79.2 to 303.5 mm h−1 for laboratory runs and from 178.3 to 215.9 mm h−1 for field investigations) and bed slopes (from 0.33 to 17% for laboratory runs and from 2.9 to 33.2% for field investigations). For th…
Slope threshold for overland flow resistance on sandy soils
2021
Recent research on rill flows recognised that an 18% slope can be used to distinguish between ‘gentle’ and ‘steep’ slope cases for the detected differences in hydraulic (flow depth and velocity) and sediment transport variables (flow transport capacity, actual sediment load). The effects of slope on flow velocity, friction factor and transport capacity and their interactions affect process-based erosion modelling. The main aim of this paper is to investigate, for the first time, how slope affects the overland flow resistance on sandy soils, which are characterised by loose particles readily available to be transported and deposited. Using literature measurements carried out in sandy soils f…
Testing a theoretical resistance law for overland flow under simulated rainfall with different types of vegetation
2020
Abstract In this paper a recently theoretically deduced flow resistance equation, based on a power-velocity profile, was tested using data collected for overland flow under simulated rainfall carried out in plots with vegetation. The available data were obtained exploring a wide range of rainfall intensities (from 60 to 181 mm h−1) and slopes (from 3.6 to 39.6%), and with four different types of vegetation. The database, including measurements of flow velocity, water depth, cross sectional flow area, wetted perimeter and bed slope, was divided in four datasets (one for each vegetation type), which allowed the calibration of the relationship between the velocity profile parameter Γ, the slop…
Flow resistance of overland flow on a smooth bed under simulated rainfall
2020
In this paper a recently theoretically deduced flow resistance equation, based on a power-velocity profile, was tested using laboratory measurements by Yoon and Wenzel for an overland flow on a smooth bed under rainfall. These measurements of the Darcy-Weisbach friction factor, corresponding to a wide range of the flow Reynolds number (191–5700), were carried out for an overland flow under a simulated rainfall characterized by different intensity values ranging from 13 to 381 mm h−1. At first, the available measured values of flow velocity, water depth, cross sectional area, wetted perimeter and bed slope were used to calibrate the relationship between the velocity profile parameter Γ, the …
Assessing an overland flow resistance approach under equilibrium sediment transport conditions
2021
Abstract In this study, for the first time, a theoretically deduced flow resistance equation was tested for an overland flow under equilibrium sediment transport conditions using available experimental data by Liu et al. for five Chinese soils. Initially the relationship among the velocity profile parameter Γ, the channel slope, the flow Reynolds number, the Froude number and the sediment concentration was calibrated using 90 measurements of the available database (Loessial, Cinnamon and Black soil) and tested by other 60 measurements (Red and Purple soil). The results proved that the Darcy–Weisbach friction factor can be accurately estimated by the proposed theoretical approach, with error…
Flow resistance due to shrubs and woody vegetation
2023
In this paper, a theoretical open channel flow resistance equation was verified using flow depth and discharge measurements carried out by Freeman et al. in a large channel, 2.44 m wide, for ten different types of uniform-sized plants (shrubs and woody vegetation). The plants, which are broadleaf deciduous vegetation commonly found in floodplains and riparian zones, were placed in staggered rows inside the channel whose bed was constructed to accept plants with their root systems. For each species, the available measurements were carried out by Freeman et al. with plants having different values of plant density, height, and bending stiffness. The available literature database (87 measuremen…
Rill flow resistance law under equilibrium bed‐load transport conditions
2019
In this paper, a recently deduced flow resistance equation for open channel flow was tested under equilibrium bed-load transport conditions in a rill. First, the flow resistance equation was deduced applying dimensional analysis and the incomplete self-similarity condition for the flow velocity distribution. Then, the following steps were carried out for developing the analysis: (a) a relationship (Equation) between the Γ function of the velocity profile, the rill slope, and the Froude number was calibrated by the available measurements by Jiang et al.; (b) a relationship (Equation) between the Γ function, the rill slope, the Shields number, and the Froude number was calibrated by the same …
A generalized stage-discharge relationship for sharp-crested power-law weirs by dimensional analysis and self-similarity
2022
Weirs are characterized by a stage-discharge relationship which mainly depends on the shape and dimensions of the hydraulic structure. A weir with symmetrical power-law sides is a versatile weir that can produce some known weir types (rectangular, triangular, parabolic) as special cases. In this paper, the outflow process of sharp-crested power-law weirs is investigated using the dimensional analysis and the incomplete self-similarity theory. A new generalized theoretical stage-discharge relationship is proposed, and its applicability is tested using measurements available in the literature for different weir types.
Comment on “Effects of different tillage practices on the hydraulic resistance of concentrated flow on the loess plateau in China” by J. Sun et al
2020
Abstract For concentrated flows, which are characterized by small water depth and steep sloping beds, hydraulic conditions different from those typical of streams and rivers occur. In this study a new theoretically deduced flow resistance equation was tested using the experimental data by Sun et al. for three different tilled surfaces (Manual Dibbling, MD, Manual Hoeing, MH, and Contour Drilling, CD). At first, the profile parameter-relationship, which is the relationship between the velocity profile parameter Γ, the channel slope and the flow Froude number, was calibrated using rill flow data by Di Stefano et al. Then, the applicability of this relationship was tested by the measurements o…
Flume experiments for assessing the dye-tracing technique in rill flows
2021
Abstract Flow velocity controls hillslope soil erosion and is a key hydrodynamic variable involved in sediment transport and deposition processes. The dye-tracer technique is one of the most applied methods for measuring velocity of shallow interrill and rill flow. The technique is based on the injection of a tracer in a specific point and the measurement of its speed to travel the known distance from the injection point to a given channel section. The dye-tracer technique requires that the measured surface flow velocity has to be corrected to obtain the mean flow velocity using a correction factor which is generally empirically deduced. The technique has two sources of uncertainties: i) th…
Slope threshold in rill flow resistance
2022
The applicability of a theoretical rill flow resistance equation, based on the integration of a power velocity distribution, was tested using measurements carried out in mobile and fixed bed rills, shaped on plots having different slopes (9, 14, 15, 18, 22, 24, 25 and 26%) and soil textures (clay fractions ranging from 32.7% to 73% and silt of 19.9–30.9%), and flume measurements available in the literature. The Darcy–Weisbach friction factor resulted dependent on the slope, Froude number, Reynolds number and clay and silt percentages, used as variables representative of soil transportability and detachability, respectively. This theoretical approach was applied to two different databases di…
New Stage–Discharge Relationship for Triangular Broad-Crested Weirs
2022
Simple hydraulic structures, such as weirs, allow measuring flow discharge by using the upstream flow depth and a stage–discharge relationship. In this relationship, a discharge coefficient is introduced to correct all the effects neglected in the derivation (viscosity, surface tension, velocity head in the approach channel, flow turbulence, non-uniform velocity profile, and streamline curvature due to weir contraction). In this paper, the dimensional analysis and the incomplete self-similarity theory are used to investigate the outflow process of triangular broad-crested weirs, characterized by different values of the ratio between crest height p and channel width B, and to theoretic…
Testing a new rill flow resistance approach using the Water Erosion Prediction Project experimental database
2018
In this paper, a recently theoretically deduced rill flow resistance equation, based on a power‐velocity profile, was tested using the Water Erosion Prediction Project database. This database includes measurements of flow velocity, water depth, cross section area, wetted perimeter, and bed slope that were made in rills shaped on experimental sites distributed across the continental United States. In particular, three different experimental conditions (only rainfall, only flow, and rain with flow) were examined, and for each condition, the theoretically based relationship for estimating the Γ function of the power velocity profile was calibrated. The results established that (a) the Darcy‐We…
Measurement of Water Soil Erosion at Sparacia Experimental Area (Southern Italy): A Summary of More than Twenty Years of Scientific Activity
2022
The main purpose of this article is to give a general idea of the scientific activity that was carried out starting from the 2000s on the basis of the data collected in the plots installed at the Sparacia experimental station for soil erosion measurement in Sicily, South Italy. The paper includes a presentation of the experimental site, a description of the methods and procedures for measuring soil erosion processes both available in the literature and applied at the Sparacia station (sediment sampling and water level reading in the storage tanks for total erosion measurements; profilometer, and Structure from Motion technique for rill erosion measurements), and the main results obtained in…
EXPERIMENTAL STUDY OF RILL FLOW RESISTANCE AT PLOT SCALE
2021
I processi erosivi costituiscono un rilevante problema ambientale con impatto anche di tipo socioeconomico. Infatti, questi processi determinando l’asportazione degli strati superficiali di suolo, causano la riduzione della fertilità e produttività del suolo, e hanno un considerevole impatto sulla biodiversità. La perdita di suolo dovuta all’erosione idrica è un fenomeno naturale ed inevitabile, che può divenire intollerabile in condizioni particolari che spesso dipendono da fattori antropici (Di Stefano e Ferro, 2016). I processi di erosione idrica sono generalmente caratterizzati dall’erosione interrill o rill. Nelle aree interrill, caratterizzate da correnti overland, il processo erosivo…