0000000000076514
AUTHOR
Soodabeh Kimyai
Effect of 15% carbamide peroxide bleaching gel on color stability of giomer and microfilled composite resin: an in vitro comparison
Objectives: The effect of 15% carbamide peroxide bleaching gel on color stability and surface topography of a giomer and a microfilled composite resin was evaluated in the present in vitro study. Study design: Forty discs measuring 10 mm in diameter and 1 mm in thickness were prepared from a giomer and a microfilled composite resin. Each material yielded 20 discs with completely smooth surfaces. Then a spectrophotometer was used to measure L* (lightness), a* (redness, greenness) and b* (blueness, yellowness) color coordinates of all the discs. Subsequently, the specimens were subjected to 15% carbamide peroxide bleaching gel. After measuring the color coordinates once again, color changes (…
Effect of pre-heating on the mechanical properties of silorane-based and methacrylate-based composites
Background The use of composites in dental restoration has been commonly criticized, due to their underwhelming mechanical properties. This problem may be solved partially by preheating. The present research aims to determine the effect of preheating on the mechanical properties of two different classes of composites. Material and methods A Silorane-based (Silorane) and a Methacrylate-based (Z250) composite were preheated to different temperatures (25, 37, and 68 °C) and afterwards were tested with the appropriate devices for each testing protocol. The material's flexural strength, elastic modulus, and Vickers microhardness were evaluated. Two-way ANOVA, and Tukey's post hoc were used to an…
Effects of different etching strategies on the microtensile repair bond strength of beautifil II giomer material
Background Considering the differences in the filler particles between giomer and conventional composite resins and the importance of these fillers in the repair bond strength, the aim was to evaluate the effects of different etching strategies with phosphoric acid (PA) and hydrofluoric acid (HF) on the microtensile repair bond strength (µTRBS) of giomer. Material and Methods Ten giomer blocks were randomly assigned into 10: 1) control; 2) 37%PA-20s; 3) 3%HF-20s; 4) 3%HF-120s; 5) 9.6%HF-20s; 6) 9.6%HF-120s; 7) 37%PA-20s + 3%HF-120s; 8) 37%PA-20s + 9.6%HF-120s; 9) 3%HF-120s + 37%PA-20s; 10) 9.6%HF-120s + 37%PA-20s. In all groups, the One-Step Plus bonding system was applied and the new giome…
Effect of calcium hydroxide dressing on microleakage of composite restorations in endodontically treated teeth subsequent to bleaching
Objective: This study evaluates the effect of calcium hydroxide dressing on microleakage of composite restorations following non-vital bleaching. Methods: A total of 45 sound extracted human maxillary central incisors underwent endodontic treatment. The teeth were randomly divided into three groups (n=15). In group 1, access cavities were restored with composite. In group 2, the teeth underwent a bleaching procedure for one week before being restored with composite. In group 3, following a bleaching procedure, calcium hydroxide paste was placed in the pulp chamber for one week. The teeth were then restored with composite. The specimens were subjected to a dye leakage test. The data was anal…
Effect of two prophylaxis methods on adherence of Streptococcus mutans to microfilled composite resin and giomer surfaces
Objectives: Surface attributes of a restoration play an important role in adherence of plaque bacteria. Prophylaxis methods may be involved in modification of or damaging the restoration surface. The aim of the present study was to evaluate the effect of two prophylaxis methods on adherence of Streptococcus mutans to the surface of two restorative materials. Study design: A total of 60 specimens were prepared from each material; a microfilled composite resin (HelioProgress) and a giomer (Beautifil II). For each material, the specimens were randomly divided into three groups (n=20). Group 1: no prophylaxis treatment (control); Group 2: prophylaxis with pumice and rubber cup; Group 3: prophyl…
Effect of self-etching primer/adhesive and conventional bonding on the shear bond strength in metallic and ceramic brackets
Introduction: Bracket debonding from the tooth surface is a common problem in fixed orthodontics. The aims of the present study were to assess the bond strength and failure sites in two ways of bonding technique, with metallic and ceramic brackets. Material and Methods: One hundred premolars were assigned to 4 groups of 25 each: Group A, metallic brackets/ conventional procedure; Group B, metallic brackets/Transbond XT; Group C, ceramic brackets/conventional procedure; and Group D, ceramic brackets/Transbond XT. Transbond XT composite paste was used for bracket bonding and cured by conventional light-cure device. Specimens were subjected to thermocycling. One week after bonding shearing for…
Effect of three prophylaxis methods on surface roughness of giomer
Objectives: Plaque and stains are removed by prophylaxis methods from tooth surfaces. Since prophylaxis methods can have a detrimental effect on the surface finish of restorations, the aim of this in vitro study was to investigate the effect of three prophylaxis methods, including pumice with rubber cup, pumice with brush, and air-powder polishing device (APD) on the surface roughness of giomer. Study design: Sixty four cylindrical giomer (Beautifil II, Shofu) samples with a diameter of 6 mm and a height of 2 mm were used. Subsequent to a 3-month period of storage in distilled water at 37ºC, the samples were randomly divided into four groups of 16. In group 1 (control), no prophylaxis proce…
Effect of alkaline ph on sealing ability of white mineral trioxide aggregate
Objectives: The aim of this study was to evaluate microleakage of white mineral trioxide aggregate (WMTA) after its exposure to a range of alkaline environments during hydration. Study Design: Seventy single-rooted teeth were divided into 4 experimental and 2 control groups. All the teeth were instrumented, and their apices were resected. Root-end cavities were filled with WMTA in the experimental groups. In the control groups, root-end cavities were not filled. Root-end fillings were exposed to alkaline environments with pH values of 7.4, 8.4, 9.4, or 10.4 for 3 days. Microleakage was evaluated by bovine serum albumin. Evaluations were carried out at 24-hour intervals for 80 days. Data wer…
Effect of disinfecting the cavity with chlorhexidine on the marginal gaps of Cl V giomer restorations
Background Considering the effect of cavity disinfecting agents on the bonding and sealing ability of restorations bonded to dentin, the aim of this study was to evaluate the effect of chlorhexidine (CHX) disinfecting agent on the marginal gaps of Cl V giomer restorations. Material and Methods Cl V cavities were prepared on the buccal surfaces of 60 sound bovine permanent incisors in this in vitro study, with the occlusal and gingival margins in enamel and dentin, respectively. The teeth were randomly divided into two groups (n=30). The teeth in groups 1 and 2 were restored without and with the use of the disinfecting agent in the cavity, respectively, before applying the adhesive. BeautiBo…
Effect of different application strategies of universal adhesive used for immediate and delayed dentin sealing on the microtensile bond strength of self-adhesive resin cement to dentin with and without aging
Bond strength of indirect restorations is a very important issue that should be given special attention. Immediate dentin sealing (IDS) technique has been suggested in recent years. The aim of the present study was to investigate the effect of different s
Effect of aluminum chloride hemostatic agent on microleakage of class V composite resin restorations bonded with all-in-one adhesive
Objectives: Since hemostatic agents can induce changes on enamel and dentin surfaces and influence composite resin adhesion, the aim of the present study was to evaluate the effect of the aluminum chloride hemostatic agent on the gingival margin microleakage of class V (Cl V) composite resin restorations bonded with all-in-one adhesive. Study design: Cl V cavities were prepared on the buccal surfaces of 60 sound bovine permanent incisors. Gingival margins of the cavities were placed 1.5 mm apical to the cemento-enamel junction (CEJ). The teeth were randomly divided into two groups of 30. In group 1, the cavities were restored without the application of a hemostatic agent; in group 2, the ca…
Effect of hemostatic agent on marginal gaps of class V giomer restorations
Background Contamination of dentin with hemostatic agents might exert a deleterious effect on adhesive procedures on dentin. The present study was undertaken to investigate the effect of aluminum chloride hemostatic agent on marginal gaps in Cl V giomer restorations. Material and Methods Fifty sound bovine permanent incisors were selected for the purpose of this in vitro study and Cl V cavities were prepared on their buccal surfaces; the gingival margins of the cavities were placed in dentin. The tooth samples were randomly assigned to two groups (n=25). The samples in groups 1 and 2 underwent a restorative procedure without and with the application of aluminum chloride hemostatic agent in …
Reparability of giomer using different mechanical surface treatments
Background In the repair process achieving high bond strength between the new and old resin based materials is necessary for clinical longevity. This study compared the effect of three different mechanical surface treatments (air abrasion, Nd:YAG laser and diamond bur) on the repair bond strength of giomer. Material and Methods In this in vitrostudy, 125 cylindrical giomer samples were used. The giomer samples were randomly assigned to 5 groups (n=25). In group 1, the samples did not undergo any surface treatment. In groups 2 to 4, the samples underwent surface treatments with air abrasion, Nd:YAG laser and a diamond bur. The samples in group 5 were prepared to measure giomer cohesive stren…
Effect of sodium ascorbate on the bond strength of all-in-one adhesive systems to NaOCl-treated dentin
Background: Ascorbic acid and its salts are low-toxicity products, which are routinely used in food industries as antioxidants. The aim of the present study was to evaluate the effect of 10% sodium ascorbate on the bond strength of two all-in-one adhesive systems to NaOCl-treated dentin. Material and Methods: After exposing the dentin on the facial surface of 90 sound human premolars and mounting in an acrylic resin mold, the exposed dentin surfaces were polished with 600-grit SiC paper under running water. Then the samples were randomly divided into 6 groups of 15. Groups 1 and 4 were the controls, in which no surface preparation was carried out. In groups 2 and 5 the dentin surfaces were …
Effect of two different tooth bleaching techniques on microhardness of giomer
Background Tooth bleaching is a safe and conservative treatment modality to improve the esthetic appearance of discolored teeth. One of the problems with the use of bleaching agents is their possible effect on surface microhardness of resin-based materials. The present study was carried out to evaluate the effect of in-office and at-home bleaching on surface microhardness of giomer. Material and Methods Seventy-five disk-shaped giomer samples (Beautifil II) were prepared and cured with a light-curing unit. The samples were randomly assigned to three groups (n=25). In group 1 (control), the samples were stored in distilled water for 14 days. The samples in groups 2 and 3 underwent a bleachin…