0000000000076948
AUTHOR
Raúl Martínez-cuenca
Enhanced viewing-angle integral imaging by multiple-axis telecentric relay system
One of the main limitations of integral imaging is the narrow viewing angle. This drawback comes from the limited field of view of microlenses during the pickup and display. We propose a novel all-optical technique which allows the substantial increase of the field of view of any microlens and therefore of the viewing angle of integral-imaging displays.
Optical implementation of micro-zoom arrays for parallel focusing in integral imaging.
We report 3D integral imaging with an electronically tunable-focal-length lens for improved depth of field. The micro-zoom arrays are generated and implemented based on the concept of parallel apodization. To the best of our knowledge, this is the first report of parallel dynamic focusing in integral imaging based on the use of micro-zoom arrays.
Formation of real, orthoscopic integral images by smart pixel mapping.
Integral imaging systems are imaging devices that provide 3D images of 3D objects. When integral imaging systems work in their standard configuration the provided reconstructed images are pseudoscopic; that is, are reversed in depth. In this paper we present, for the first time we believe, a technique for formation of real, undistorted, orthoscopic integral images by direct pickup. The technique is based on a smart mapping of pixels of an elemental-images set. Simulated imaging experiments are presented to support our proposal.
3D integral imaging with optical processing
Integral imaging (InI) systems are imaging devices that provide auto-stereoscopic images of 3D intensity objects. Since the birth of this new technology, InI systems have faced satisfactorily many of their initial drawbacks. Basically, two kind of procedures have been used: digital and optical procedures. The "3D Imaging and Display Group" at the University of Valencia, with the essential collaboration of Prof. Javidi, has centered its efforts in the 3D InI with optical processing. Among other achievements, our Group has proposed the annular amplitude modulation for enlargement of the depth of field, dynamic focusing for reduction of the facet-braiding effect, or the TRES and MATRES devices…
Digital slicing of 3D scenes by Fourier filtering of integral images
We present a novel technique to extract depth information from 3D scenes recorded using an Integral Imaging system. The technique exploits the periodic structure of the recorded integral image to implement a Fourier-domain filtering algorithm. A proper projection of the filtered integral image permits reconstruction of different planes that constitute the 3D scene. The main feature of our method is that the Fourier-domain filtering allows the reduction of out-of-focus information, providing the InI system with real optical sectioning capacity.
Optimized integral imaging display by global pixel mapping
Integral imaging systems are imaging devices that provide 3D images of 3D objects. When integral imaging systems work in their standard configuration the provided reconstructed images are pseudoscopic; that is, are reversed in depth. In this paper we present a technique for formation of real, undistorted, orthoscopic integral images by direct pickup. The technique is based on a global mapping of pixels of an elemental-images set. Simulated imaging experiments are presented.
Orthoscopic long-focal-depth 3D integral imaging
Integral imaging systems are imaging devices that provide 3D images of 3D objects. When integral imaging systems work in their standard configuration the provided reconstructed images are pseudoscopic; that is, are reversed in depth. In this paper we present, a technique for formation of real, undistorted, orthoscopic integral images by direct pickup. The technique is based on the use of a proper relay system and a global mapping of pixels of the elemental-images set. Simulated imaging experiments are presented to support our proposal.
Facet braiding: a fundamental problem in integral imaging.
A rigorous explanation of a phenomenon that produces significant distortions in the three-dimensional images produced by integral imaging systems is provided. The phenomenon, which we refer to as the facet-braiding effect, has been recognized in some previous publications, but to our knowledge its nature has never been analyzed. We propose a technique for attenuating the facet-braiding effect. We have conducted experiments to illustrate the consequences of the facet-braiding effect on three-dimensional integral images, and we show the usefulness of the proposed technique in eliminating this effect.
Optically-corrected elemental images for undistorted Integral image display
Conventional macro objectives are generally used as relay systems in the capture stage in Integral Imaging. This choice leads to microimage overlap and shift, which produce undesirable effects on the reconstructed three-dimensional images, such as loss in resolution and image distortions. In this paper, we propose and demonstrate a new architecture for the capture stage. Our method uses a telecentric relay system to overcome the conventional drawbacks. Experiments conducted with our system show an important improvement in the quality of displayed images.
Diffractive pulse-front tilt for low-coherence digital holography
We use a diffractive lens to generate the proper pulse-front-tilt to record full-field off-axis holograms with a 10fs laser source. We experimentally demonstrate optical sectioning of three-dimensional samples with a resolution of about 5 microns.
Free-motion beam propagation factor measurement by means of a liquid crystal SLM
We propose a compact and robust method to measure beam propagation factor (M2) of continuous wave (cw) laser beams. In contrast to the conventional scanning procedure described in the ISO/DIS 11146 standard, our proposal takes advantage of the features of programmable liquid crystal spatial light modulators (SLMs) where a lens is codified. Then, by using a CCD at a fixed position, the beam width according to the second order moment of the irradiance is determined for each focal length of the codified lenses. After adjusting the measured data to the theoretical focusing behavior of a real laser beam, the beam propagation factor is obtained. The proposed method was successfully validated in t…
Diffractive optics for high-resolution low-coherence digital holography
We study the properties of the recording of off-axis holograms when a 10 fs pulsed laser is used as illumination source. A proper optical design involving one diffractive lens outside a Michelson interferometer enables the recording of full-field off-axis holograms with high resolution and optical sectioning. We demonstrate our approach with some experimental results that show optical sectioning with a maximum resolution of 3.5 µm. We note that the axial resolution of the technique is reduced up to 9 µm when the object beam travels through a few millimeters of glass due to the pulse broadening along dispersive media.
Spatio-temporal control of ultra-short pulses by using diffractive optical elements
Diffractive optical elements (DOEs) have shown their applicability to control the spatio-temporal characteristics of ultra-short laser pulses. DOEs can provide high efficiency, compactness, very low material dispersion and, when implemented with spatial light modulators, real-time pulse engineering. In this communication, we report management of temporal and spectral profiles of ultra-short pulses by means of a quasi-direct space-to-time (QDST) pulse shaper. Moreover, we present spatio-temporal control, including dispersion compensation, by DOEs, and applications for activating nonlinear processes. On the other hand, we have achieved complete spatial control of ultra-short pulses, overcomin…
Dispersion management in two-photon microscopy by using diffractive optical elements.
We demonstrate efficient generation of wide-field fluorescence signals in two-photon microscopy exploiting diffractive optical elements and short pulses by using a dispersion-compensated beam delivery optics module. Computer-generated holograms are codified onto a phase-only spatial light modulator, which allows for arbitrary single-shot patterning of the sample. Spatiotemporal shaping of the pulse is mandatory to overcome spatial chirp and pulse-front tilt effects that spread both in space and time the irradiance patterns, thus limiting not only the spatial resolution but also the signal-to-noise ratio in two-photon microscopy. By using a multipass amplifier delivering 30 fs, 0.8 mJ pulses…
Three-dimensional object-distortion-tolerant recognition for integral imaging using independent component analysis
Independent component analysis (ICA) aims at extracting unknown components from multivariate data assuming that the underlying components are mutually independent. This technique has been successfully applied to the recognition and classification of objects. We present a method that combines the benefits of ICA and the ability of the integral imaging technique to obtain 3D information for the recognition of 3D objects with different orientations. Our recognition is also possible when the 3D objects are partially occluded by intermediate objects.
Enhanced field-of-view integral imaging display using multi-Köhler illumination.
A common drawback in 3D integral imaging displays is the appearance of pseudoimages beyond the viewing angle. These pseudoimages appear when the light rays coming from each elemental image are not passing through the corresponding microlens, and a set of barriers must be used to avoid this flipping effect. We present a pure optical arrangement based on Köhler illumination to generate these barriers thus avoiding the pseudoimages. The proposed system does not use additional lenses to project the elemental images, so no optical aberrations are introduced. As an added benefit, Köhler illumination provides a higher contrast 3D display. This work was supported in part by the Plan Nacional I + D …
Fully programmable display parameters in integral imaging by smart pseudoscopic-to-orthoscopic conversion
Previously, we reported a digital technique for formation of real, non-distorted, orthoscopic integral images by direct pickup. However the technique was constrained to the case of symmetric image capture and display systems. Here, we report a more general algorithm which allows the pseudoscopic to orthoscopic transformation with full control over the display parameters so that one can generates a set of synthetic elemental images that suits the characteristics of the Integral-Imaging monitor and permits control over the depth and size of the reconstructed 3D scene.
Automatic target recognition using 3D passive sensing and imaging with independent component analysis
We present an overview of a method using Independent Component Analysis (ICA) and 3D Integral Imaging (II) technique to recognize 3D objects at different orientations. This method has been successfully applied to the recognition and classification of 3D scenes.
Relay optics for enhanced integral imaging
Integral imaging provides with three-dimensional (3D) images. This technique works perfectly with incoherent light and does not need the use of any special glasses nor stabilization techniques. Here we present relay systems for both acquire and display 3D images. Some other important challenges are revisited.
3D integral imaging display by smart pseudoscopic-to-orthoscopic conversion (SPOC).
Previously, we reported a digital technique for formation of real, non-distorted, orthoscopic integral images by direct pickup. However the technique was constrained to the case of symmetric image capture and display systems. Here, we report a more general algorithm which allows the pseudoscopic to orthoscopic transformation with full control over the display parameters so that one can generate a set of synthetic elemental images that suits the characteristics of the Integral-Imaging monitor and permits control over the depth and size of the reconstructed 3D scene.
Enhanced depth of field integral imaging with sensor resolution constraints.
One of the main challenges in integral imaging is to overcome the limited depth of field. Although it is widely assumed that such limitation is mainly imposed by diffraction due to lenslet imaging, we show that the most restricting factor is the pixelated structure of the sensor (CCD). In this context, we demonstrate that by proper reduction of the fill factor of pickup microlenses, the depth of field can be substantially improved with no deterioration of lateral resolution.
Multifacet structure of observed reconstructed integral images.
Three-dimensional images generated by an integral imaging system suffer from degradations in the form of grid of multiple facets. This multifacet structure breaks the continuity of the observed image and therefore reduces its visual quality. We perform an analysis of this effect and present the guidelines in the design of lenslet imaging parameters for optimization of viewing conditions with respect to the multifacet degradation. We consider the optimization of the system in terms of field of view, observer position and pupil function, lenslet parameters, and type of reconstruction. Numerical tests are presented to verify the theoretical analysis.
Progress in 3-D Multiperspective Display by Integral Imaging
Three-dimensional (3-D) imaging techniques have the potential to establish a future mass-market in the fields of entertainment and communications. Integral imaging (InI), which can capture and display true 3-D color images, has been seen as the right technology for 3-D viewing for audiences of more than one person. Due to the advanced degree of its development, InI technology could be ready for massive commercialization in the coming years. This development is the result of a strong research effort performed over the past few years. In this sense, this paper is devoted to reviewing some recent advances in InI, which have allowed improvement in the response of InI systems to the problems of …
Reduction of focus size in tightly focused linearly polarized beams
The electromagnetic theory predicts that when a linearly polarized collimated field is focused by a high-angle focusing system, components perpendicular to the initial polarization are generated. The use of annular masks to reduce the area of the focal spot usually increases the magnitude of this phenomenon, known as depolarization. We present a class of masks, the three-ring masks, which are important because they narrow the central lobe of the focal intensity distribution without increasing the depolarization. This can be very useful in modern optical applications, such as confocal microscopy or multiphoton scanning microscopy.
Method to Remedy Image Degradations Due to Facet Braiding in 3D Integral-Imaging Monitors
One of the main challenges in 3D integral imaging (InI) is to overcome the limited depth of field of displayed 3D images. Although this limitation can be due to many factors, the phenomenon that produces the strongest deterioration of out-of-focus images is the facet braiding. In fact, the facet braiding is an essential problem, since InI 3D monitors are not feasible if the braiding problem is not solved. In this paper, we propose a very simple method for overcoming the facet braiding effect which is a serious limitation for realization of 3D TV based on InI. Hybrid experiments are presented to verify the theoretical analysis.
Reduction of spherical-aberration impact in microscopy by wavefront coding
In modern high-NA optical scanning instruments, like scanning microscopes, the refractive-index mismatch between the sample and the immersion medium introduces a significant amount of spherical aberration when imaging deep inside the specimen, spreading out the impulse response. Since such aberration depends on the focalization depth, it is not possible to achieve a static global compensation for the whole 3D sample in scanning microscopy. Therefore a depth-variant impulse response is generated. Consequently, the design of pupil elements that increase the tolerance to this aberration is of great interest. In this paper we report a hybrid technique that provides a focal spot that remains alm…
One-shot color digital holography based on the fractional talbot effect
We present a simple method for recording on-axis color digital holograms in a single shot. Our system performs parallel phase-shifting interferometry by using the fractional Talbot effect for every chromatic channel simultaneously. Experimental results are also shown.
Reconfigurable Shack-Hartmann sensor without moving elements.
We demonstrate wavefront sensing with variable measurement sensitivity and dynamic range by means of a programmable microlens array implemented onto an off-the-shelf twisted nematic liquid crystal display operating as a phase-only spatial light modulator. Electronic control of the optical power of a liquid lens inserted at the aperture stop of a telecentric relay system allows sensing reconfigurability without moving components. Results of laboratory experiments show the ability of the setup to detect both smooth and highly aberrated wavefronts with adequate sensitivity.
Extended Depth-of-Field 3-D Display and Visualization by Combination of Amplitude-Modulated Microlenses and Deconvolution Tools
One of the main challenges in 3-D display and visualization is to overcome its limited depth of field. Such limitation is due to the fast deterioration of lateral resolution for out-of-focus object positions. Here we propose a new method to significantly extend the depth of field. The method is based on the combined benefits of a proper amplitude modulation of the microlenses, and the application of deconvolution tools. Numerical tests are presented to verify the theoretical analysis.
Progresses in 3D integral imaging with optical processing
Integral imaging is a promising technique for the acquisition and auto-stereoscopic display of 3D scenes with full parallax and without the need of any additional devices like special glasses. First suggested by Lippmann in the beginning of the 20th century, integral imaging is based in the intersection of ray cones emitted by a collection of 2D elemental images which store the 3D information of the scene. This paper is devoted to the study, from the ray optics point of view, of the optical effects and interaction with the observer of integral imaging systems.
Lightfield recording and reconstruction by integral imaging
Integral imaging is a rising 3D imaging technique that can be considered the incoherent version of holography. In integral imaging the multiperspective information of 3D scenes is stored in a 2D picture. Such picture is nothing but a sampling version of the lightfield emitted by the 3D scene. The recorded lightfield can be used for many purposes. One is the display of 3D color scenes to audiences or much more than one person. Other is the 3D display, with full parallax, in personal monitors, like the screen of a Smartphone, a tablet, or the monitor used by a surgeon in an endoscopic operation. Other important types of applications are connected with the topographic reconstruction, slice by …
High-visibility interference fringes with femtosecond laser radiation.
We propose and experimentally demonstrate an interferometer for femtosecond pulses with spectral bandwidth about 100 nm. The scheme is based on a Michelson interferometer with a dispersion compensating module. A diffractive lens serves the purpose of equalizing the optical-path-length difference for a wide range of frequencies. In this way, it is possible to register high-contrast interference fringes with micrometric resolution over the whole area of a commercial CCD sensor for broadband femtosecond pulses.