0000000000115754
AUTHOR
Fabio Cismondi
showing 11 related works from this author
Systems engineering activities supporting the heating & current drive and fuelling lines systems integration in the European DEMO breeding blanket
2019
This paper describes the contribution given by the application of the systems engineering approach to the European DEMO Breeding Blanket (BB) integration studies, focussing on the integration of Heating & Current Drive (H&CD) and Fuelling Lines (FL) systems. In particular, attention has been paid to the BB-H&CD and BB-FL interfaces identification, definition and capture of the proper interface requirements necessary to drive the integration process and, as a consequence, supply a feedback for the reciprocal design of the interconnected systems. The defined interfaces are synthetically described in the paper and the results of the interface requirements capture process are shown,…
Design of the EU-1MW gyrotron for ITER
2013
EU is developing a 1 MW cylindrical cavity gyrotron. In the last year the design of the components of the new gyrotron has been finalized while the technological design of the new tube has been defined. In the present paper, the main characteristics of the new EU gyrotron for ITER are presented.
Status of the EU DEMO HCLL breeding blanket design development
2018
International audience; In the framework of the European “HORIZON 2020” innovation and research programme, the EUROfusion Consortium develops a design of a fusion power demonstrator (DEMO). One of the key components in the fusion reactor is the Breeding Blanket (BB) surrounding the plasma, ensuring tritium self-sufficiency, heat removal for conversion into electricity, and neutron shielding. CEA-Saclay, with the support of Wigner-RCP and Centrum výzkumu Řež, is in charge of the development of one of the four BB concepts investigated in Europe for DEMO: the Helium Cooled Lithium Lead (HCLL) BB. The rationales of the HCLL are the use of Eurofer as structural material, eutectic liquid lithium-…
Investigation of the DEMO WCLL Breeding Blanket Cooling Water Activation
2020
Abstract Within the framework of the activities foreseen by the EUROfusion action on the cooling water activation assessment for a DEMO reactor equipped with a Water Cooled Lithium Lead Breeding Blanket (WCLL BB), the University of Palermo is involved in the assessment of dose rates induced by the decay of nitrogen radioisotopes produced by water activation, nearby the main components (e.g. isolation valves) of both First Wall (FW) and Breeder Zone (BZ) cooling circuits. In particular, the aim of this work is to evaluate the spatial distribution of nitrogen isotopes (16N and 17N) in the WCLL BB cooling circuits. To this purpose, a coupled neutronic/fluid-dynamic problem is solved following …
Overview of the DEMO staged design approach in Europe
2019
This paper describes the status of the pre-conceptual design activities in Europe to advance the technical basis of the design of a DEMOnstration Fusion Power Plant (DEMO) to come in operation around the middle of this century with the main aims of demonstrating the production of few hundred MWs of net electricity, the feasibility of operation with a closed-tritium fuel cycle, and maintenance systems capable of achieving adequate plant availability. This is expected to benefit as much as possible from the ITER experience, in terms of design, licensing, and construction. Emphasis is on an integrated design approach, based on system engineering, which provides a clear path for urgent R&D …
Consolidated design of the HCPB Breeding Blanket for the pre-Conceptual Design Phase of the EU DEMO and harmonization with the ITER HCPB TBM program
2020
Abstract From 2014 to 2020, the Pre-Conceptual Design phase (PCD) of the EU DEMO has taken place. The activities in the PCD phase differ from past exercises in their strong Systems Engineering methodology, as well as for the pragmatic approach in their technology choices. The Helium Cooled Pebble Bed (HCPB) is one of the 2 candidates as driver blanket for the EU DEMO in the PCD phase. Several design iterations have been required during the PCD phase in order to adjust the design to the current demanding DEMO requirements, to the very challenging systems integration and to the need to keep near-term technologies. To this respect, the design has evolved to a so-called fuel-breeder pin archite…
Integrated design of breeding blanket and ancillary systems related to the use of helium or water as a coolant and impact on the overall plant design
2021
Currently, for the EU DEMO, two Breeding Blankets (BBs) have been selected as potential candidates for the integration in the reactor. They are the Water Cooled Lithium Lead and the Helium Cooled Pebble Bed BB concepts. The two BB variants together with the associated ancillary systems drive the design of the overall plant. Therefore, a holistic investigation of integration issues derived by the BB and the installation of its ancillary systems has been performed. The issues related to the water activation due to the 16N and 17N isotopes and the impact on the primary heat transfer systems have been investigated providing guidelines and dedicated solution for the integration of safety devices…
Progress of the conceptual design of the European DEMO breeding blanket, tritium extraction and coolant purification systems
2020
Abstract In the frame of the EUROfusion consortium activities the Helium Cooled Pebble Bed (HCPB) and the Water Cooled Lithium Lead (WCLL) concepts are being developed as possible candidates to become driver Breeding Blanket (BB) for the EU DEMO, which aims at the tritium self-sufficiency and net electricity production. The two BB design options encompass water or helium as coolants and solid ceramic with beryllium/beryllides or PbLi as tritium breeder and neutron multipliers. The BB segments have evolved towards a more stable conceptual design taking into account multiple feasibility aspects and requirements imposed by interfacing systems. Possible solutions to improve shielding capabiliti…
Feasibility of D-D start-up under realistic technological assumptions for EU-DEMO
2021
Abstract One of the main issues in view of the realization of a DEMOnstration fusion reactor is the availability of a sufficient external supply of tritium (T) to start operation. T is an unstable nuclide, which is almost absent in nature and is currently available as by-product in e.g. CANDU, whose operation in the next decades (both in terms of life extension of existing reactors and construction of new ones) is at the moment under debate. During DEMO operation, T will be generated on-site by breeding blanket, employing the neutrons originating from D-T reaction. However, it is considered that a certain initial amount of T is needed to start operation, the so-called start-up inventory. An…
Progress in EU Breeding Blanket design and integration
2018
Abstract In Europe (EU), in the frame of the EUROfusion consortium activities, four Breeding Blanket (BB) concepts are being developed with the aim of fulfilling the performances required by a near-term fusion power demonstration plant (DEMO) in terms of tritium self-sufficiency and electricity production. The four blanket options cover a wide range of technological possibilities, as water and helium are considered as possible coolants and solid ceramic breeder in combination with beryllium and PbLi as tritium breeder and neutron multipliers. The strategy for the BB selection and operation has to account for the challenging schedule of the EU DEMO, the ambitious operational requirements of …
Assessment of DEMO WCLL breeding blanket primary heat transfer system isolation valve absorbed doses due to activated water
2020
Abstract Within the framework of the activities foreseen by the EUROfusion action on the cooling water activation assessment for a DEMO reactor equipped with a Water Cooled Lithium Lead Breeding Blanket (WCLL BB), the University of Palermo is involved in the investigation of the absorbed dose induced by the decay of nitrogen radioisotopes produced by water activation, in the main components (e.g. isolation valves) of both First Wall (FW) and Breeder Zone (BZ) cooling circuits. The aim of this work is to assess the spatial distribution of the absorbed dose in the DEMO Upper Pipe Chase (UPC), focusing the attention on the space neighbouring a typical isolation valve of the Primary Heat Transf…