0000000000117167
AUTHOR
Alessandro Del Nevo
Conceptual design of the main Ancillary Systems of the ITER Water Cooled Lithium Lead Test Blanket System
Abstract The Water Cooled Lithium Lead Test Blanket System (WCLL TBS) is one of the EU Test Blanket Systems candidate for being installed and operated in ITER. In view of its Conceptual Design Review by F4E and ITER Organization (IO), planned for mid-September 2020, several technical activities have been performed in the areas of WCLL TBS Ancillary Systems design. In this article the outcomes of the conceptual design phase of the four main Ancillary Systems of WCLL TBS, namely the Water Cooling System (WCS), the Coolant Purification System (CPS), the PbLi loop and the Tritium Extraction System (TES), are reported and critically discussed. In particular, for each Ancillary System hereafter a…
On the effects of the Double-Walled Tubes lay-out on the DEMO WCLL breeding blanket module thermal behavior
Abstract The EU-DEMO Water-Cooled Lithium Lead Breeding Blanket (WCLL BB) concept foresees liquid Pb-15.7Li eutectic alloy as breeder and neutron multiplier, whereas pressurized subcooled water as coolant, with operative conditions typical of the PWR fission reactors (temperature in the range of 295–328 °C and pressure of 15.5 MPa). The cooling down of the BB is guaranteed by means of two separated cooling circuits: the one consisted in square channels housed within the complex of Side Walls and First Wall, and the one composed of a set of Double-Walled Tubes (DWTs) submerged in the Breeding Zone (BZ) and deputed to remove heat power therein generated. A parametric thermal study has been ca…
Parametric thermal analysis for the optimization of Double Walled Tubes layout in the Water Cooled Lithium Lead inboard blanket of DEMO fusion reactor
Abstract Within the roadmap that will lead to the nuclear fusion exploitation for electric energy generation, the construction of a DEMOnstration (DEMO) reactor is, probably, the most important milestone to be reached since it will demonstrate the technological feasibility and economic competitiveness of an industrial-scale nuclear fusion reactor. In order to reach this goal, several European universities and research centres have joined their efforts in the EUROfusion action, funded by HORIZON 2020 UE programme. Within the framework of EUROfusion research activities, ENEA and University of Palermo are involved in the design of the Water-Cooled Lithium Lead Breeding Blanket (WCLL BB), that …
Structural assessment of the EU-DEMO WCLL Central Outboard Blanket segment under normal and off-normal operating conditions
Abstract Within the framework of the EUROfusion design activities concerning the EU-DEMO Breeding Blanket (BB) system, a research campaign has been carried out at the University of Palermo with the aim of investigating the structural behaviour of the DEMO Water-Cooled Lithium Lead (WCLL) Central Outboard Blanket (COB) segment. The assessment has been performed considering three different loading scenarios: the Normal Operation (NO), the Over-Pressurization (OP) and the Upward Vertical Displacement Event (VDE-up). In particular, NO scenario represents the loading case referring to the nominal operating conditions, whereas the OP scenario refers to the loading conditions due to an in-box LOCA…
Parametric study of the influence of First Wall cooling water on the Water Cooled Lithium Lead Breeding Blanket nuclear response
Abstract In the framework of EUROfusion Work Package International Cooperation R&D activities, a close collaboration has been started among University of Palermo, ENEA Brasimone and ENEA Frascati for the development of the Water Cooled Lithium Lead (WCLL) Breeding Blanket (BB) concept. In this context, a research campaign has been carried out at the University of Palermo in order to investigate the influence of First Wall (FW) cooling water configuration on the nuclear response of the WCLL BB under irradiation in EU-DEMO, in order to gain useful indications for the WCLL BB pre-conceptual designs. To this end, three-dimensional nuclear analyses have been performed by MCNP5 v. 1.6 Monte Carlo…
The DEMO water-cooled lead–lithium breeding blanket: design status at the end of the pre-conceptual design phase
The Water-Cooled Lead–Lithium Breeding Blanket (WCLL BB) is one of the two blanket concept candidates to become the driver blanket of the EU-DEMO reactor. The design was enacted with a holistic approach. The influence that neutronics, thermal-hydraulics (TH), thermo-mechanics (TM) and magneto-hydro-dynamics (MHD) may have on the design were considered at the same time. This new approach allowed for the design team to create a WCLL BB layout that is able to comply with different foreseen requirements in terms of integration, tritium self-sufficiency, and TH and TM needs. In this paper, the rationale behind the design choices and the main characteristics of the WCLL BB needed for the EU-DEMO …
On the impact of the heat transfer modelling approach on the prediction of EU-DEMO WCLL breeding blanket thermal performances
Abstract The Water-Cooled Lithium-Lead Breeding Blanket is a key component of a fusion power plant, in charge of ensure Tritium production, shield Vacuum Vessel and magnets and remove the heat power deposited by radiation and particles arising from plasma. The last function is fulfilled by First Wall and Breeding Zone independent cooling systems. Several layouts of BZ coolant system have been investigated in the last years to identify a configuration that might guarantee EUROFER temperature below the limit (550 °C) and good thermal-hydraulic performances (i.e. water outlet temperature of 328 °C). A research activity is conducted to study and compare different modelling approaches to simulat…
Parametric study of the influence of double-walled tubes layout on the DEMO WCLL breeding blanket thermal performances
Abstract Within the framework of the EUROfusion activities regarding the EU-DEMO Breeding Blanket (BB) concept, the University of Palermo is long-time involved, in close cooperation with ENEA, in the design of the Water Cooled Lithium Lead (WCLL) BB, that is one of the two concepts under consideration for the DEMO reactor. It is mainly characterized by a liquid lithium-lead eutectic alloy acting as breeder and neutron multiplier, as well as by subcooled pressurized water flowing as coolant under PWR-like conditions (pressure of 15.5 MPa and inlet/outlet temperatures of 295 °C/328 °C). A research campaign has been recently carried out to study the potential influence of the Breeding Zone coo…
Recent Progress in the WCLL Breeding Blanket Design for the DEMO Fusion Reactor
The water-cooled lithium-lead (PbLi) breeding blanket is one of the candidate systems considered for the implementation in the European Demonstration Power Plant (DEMO) nuclear fusion reactor. This concept employs PbLi liquid metal as tritium breeder and neutron multiplier, water pressurized at 15.5 MPa as the coolant, and EUROFER as the structural material. The current design is based on the single module segment approach and follows the requirements of the DEMO-2015 baseline design. The module is constituted by a basic toroidal-radial cell that is recursively repeated along the poloidal direction where the liquid metal flows along a radial-poloidal path. The heat generated by the fusion r…