VIRTUAL REALITY AND BIM FOR INFRASTRUCTURES

Abstract. Building Information Modelling (BIM) has been widely adopted in the construction industry as a means of improving project efficiency, reducing errors, and facilitating collaboration among stakeholders. However, its potential for the infrastructure sector has not been fully explored. Infrastructure projects, such as roads, bridges, tunnels, and airports, are often complex and require the integration of multiple systems and disciplines. BIM has the potential to provide a digital representation of the infrastructure project, allowing for improved design, construction, and maintenance. This paper aims to explore the potential benefits of BIM in the infrastructure sector, examine the c…

Life-Cycle Costing Decision-Making Methodology and Urban Intersection Design: Modelling and Analysis for a Circular City

The importance of being circular reflects one of the key concepts of the life-cycle thinking that promotes the sustainable production of goods and services. If it is true that the analysis of the product life-cycle is fundamental to optimize the use of resources and to plan for the future reduction of adverse effects on urban environment, it is also true that there are still several barriers covering conceptual and practical issues which hinder the building of shared approaches for the economic evaluation of infrastructure projects. The chapter presents a case study where the Life-Cycle Cost methodology is used to compare three alternative intersection projects based on their total life-cyc…

A Top-Down Approach Based on the Circularity Potential to Increase the Use of Reclaimed Asphalt

Resource depletion and climate change, amongst others, are increasingly worrying environmental challenges for which the road engineering sector is a major contributor. Globally, viable solutions that comply with the principles of circular economy (CE) are being investigated that can replace conventional asphalt mixtures in a post-fossil fuel society. The use of reclaimed asphalt (RA) is a widely used and well-established method to reduce the environmental and economic impacts of asphalt mixtures while increasing their circularity. However, RA’s market supply and demand have not yet been systematically analyzed and established. Moreover, the actual circularity potential and the opportu…

Integrating vehicle specific power methodology and microsimulation in estimating emissions on urban roundabouts

In this study pollutant emissions were estimated from VSP modal emission rates and the distribution of time spent in each VSP mode obtained from the speed profiles both gathered in the field and simulated in AIMSUN at a sample of urban roundabouts. The versatility of the micro-simulation model for a calibration aimed at improving accuracy of emissions estimates was tested in order to ensure that second-by-second trajectories experienced in the field by a test vehicle through the sampled roundabouts properly reflected the simulated speed profiles. The first results which the thesis will refer, confirmed the feasibility of the smart approach that integrates the use of field-observed and simul…

Examining the critical factors that influence the success of construction and demolition waste reverse logistics operations

The reverse logistics (RL) performance of construction and demolition waste (C&DW) differs significantly between countries. Although some countries are successfully circular, other countries are still far behind; with C&DW being largely directed to landfills or being illegally dumped. There is a lack of guidelines on the requirements for transitioning countries towards C&DW diversion, and little attention has been given to the factors that influence the success of C&DW RL and increased circularity. This study aims to develop a framework that helps in structuring and assessing the success of C&DW RL on a regional level and serves as a guide for transitioning developing co…

UAV experimentation for pavement distresses detection

In recent years, due to the high costs of traditional road failure detection techniques, the research has focused its attention on the use of the drone for the recognition of deterioration by experimenting with lowcost 3D detection techniques. The use of these techniques allows to carry out monitoring operations according to a structured and effective planning to guarantee the safety of users. The purpose of this paper is to verify the gradient that determines the loss of accuracy of the 3D acquisition as the flight altitude changes. in this way, the practitioner will have a handbook through which he can decide the altitude of the flight to obtain that degree of metric accuracy. The applica…

Effect of temperature and traffic on mix-design of bituminous asphalt for railway sub-ballast layer

A wide integrated research has been carried out to assess the suitability of bituminous mixtures as the sub-ballast layer in railways. The influence of temperature on the mechanical characteristics and thermal susceptibility of the bituminous conglomerate—which forms sub-ballast layer of railway lines—has provided the motivation for carrying out a measurement of the thermal cycles in this layer. The evaluation of the average seasonal temperatures has proven to be well interpolated by sinusoidal functions, of which characteristic parameters are determined. To expand the validity of the study in different weather situations apart from Sicily, where the experiment was held, we proceeded to app…

Environmental Performance Evaluation at Urban Roundabouts

Transformation toward greener, healthier and safer management of urban mobility demand is needed soon. Smart tools are available to assess the impact of new infrastructural projects and road facilities also from an environmental point of view. In this pilot study pollutant emissions at a sample of urban roundabouts were estimated employing the Vehicle Specific Power methodology which needs second-by-second speed profiles both gathered in the field and simulated in AIMSUN. The versatility of the micro-simulation model for a calibration aimed at improving accuracy of the emissions estimates was tested in order to ensure that second-by-second trajectories experienced in the field properly refl…

STATE OF PRACTICE IN THE C&DW SECTOR WHILE PURSUING CIRCULAR ECONOMY: THE ITALIAN RECYCLED MATERIALS MARKET IN ROAD ENGINEERING

Construction and demolition waste (C&DW) is mainly produced during the construction, demolition, or renovation activities of engineering structures and it accounts for a remarkable amount of the total C&DW generated, as it is estimated to be around 30%. This proportion differs across countries belonging to different types of economies and tends to be greater in countries with developing economies reaching 74% of total annual production. There is a plethora of applications that C&DW can be used for under a circular economic model and in this research study a focus is being given in the utilization of C&DW within the pavement engineering sector, and more specifically, in the u…

Impacts of roundabouts in suburban areas on congestion-specific vehicle speed profiles, pollutant and noise emissions: an empirical analysis

Abstract Increasing concern about global warming and air quality has meant an increasing use of energetic and environmental indicators in roundabout design. This research compares different suburban roundabouts in terms of traffic performance, pollutant and noise emissions through an integrated empirical assessment. Field measurements were carried out with a light duty vehicle in single-lane (SL), compact two-lane (CTL) and multi-lane (ML) roundabouts using Portable Emission Measurements Systems, On-Board Diagnostic scan tool and Sound Level Meter, to measure real-world exhaust emissions, engine activity and acoustic data, respectively. Afterwards, predictive discrete choice models that cor…

Comparing the Material Circularity Index of the Italian and Spanish motorways: A case study over the Mediterranean basin

Closely following the attempt of the pavement engineering industry to comply with the principles of Circular Economy (CE) while simultaneously promoting its principles, it can be detected that a significant effort is being made towards the minimization of the energy and raw materials usually utilized. In this regard, Reclaimed Asphalt (RA) is a product that exhibits a tremendous exploitation potential. Knowing that by definition CE is restorative [1], regenerative, and aims to keep products, components, and materials at their highest utility and value at all times [2], i.e. it supports the “re-circulation” of materials and energy within the same or alternative product systems and thus the e…

Environmental Performance Assessment of Urban Roundabouts

To meet continuous and sustainable improvement on road infrastrucutures, new technologies and smart devices are encouraging the development of a mobile crowdsensing system for collecting and monitoring data to be used in efficiency assessment. In this view, the paper proposes a methodological approach that employs in an integrated way vehicle trajectory data collected in the field, the Vehicle Specific Power methodology and a microscopic traffic simulation model for estimating emissions at urban roundabouts. For a first characterization of the emissive phenomenon reference was made to an existing two-lane roundabout in Palermo, Italy, where vehicle trajectory data were collected using a sma…

Passenger Car Equivalents for Heavy Vehicles at Roundabouts. a Synthesis Review

Passenger Car Equivalents (PCEs in the following) are used to transform a mixed fleet of vehicles into a fleet of equivalent passenger cars and to analyze capacity and level-of-service of roads and intersections. Most roundabouts guidelines propose constant values for PCEs but a single PCE value can result improper under heterogeneous traffic conditions. PCEs should be vary with traffic and road conditions and consequently PCEs applied to undersaturated traffic conditions can overestimate the heavy vehicle effect or be not sensitive to the traffic level or characteristics of heavy vehicles. Compared to other at-grade intersections, the interaction between the operational performances of the…

ISIM - INFRASTRUCTURES & STRUCTURES INFORMATION MODELING: A NEW CONCEPT OF BIM FOR INFRASTRUCTURES

The application of Building Information Modeling (BIM) in infrastructure and structural projects, known as Integrated Structural and Infrastructure Modeling (ISIM), has gained attention in recent years due to its potential to revolutionize the construction industry. By providing a digital representation of the built environment, BIM allows for improved collaboration and communication between project stakeholders, leading to enhanced project outcomes. The ISIM approach is centered on the creation of a digital twin, a three-dimensional model of the infrastructure or structure, which serves as a virtual replica of the physical asset. This digital twin provides a platform for analysis, decision…

Estimation of Passenger Car Equivalents for Two-Lane and Turbo Roundabouts Using AIMSUN

The paper addresses issues related to Passenger Car Equivalents (PCEs) at roundabouts. Compared to other road units, the curvilinear elements of roundabout geometric design may impose greater constraints on vehicular trajectories and have a significant effect on the swept envelope of heavy vehicles. Specifically, the aim of the paper is to present the methodological approach which used traffic microsimulation to estimate PCEs. Focus is made on a case study which considered the conversion of a two-lane roundabout into a basic turbo roundabout with comparable size. Empirical capacity functions for both roundabouts were derived as target values to which simulated capacities by lane were compar…

Assessing the Environmental Performances of Urban Roundabouts Using the VSP Methodology and AIMSUN

In line with globally shared environmental sustainability goals, the shift towards citizen-friendly mobility is changing the way people move through cities and road user behaviour. Building a sustainable road transport requires design knowledge to develop increasingly green road infrastructures and monitoring the environmental impacts from mobile crowdsourced data. In this view, the paper presents an empirically based methodology that integrates the vehicle-specific power (VSP) model and microscopic traffic simulation (AIMSUN) to estimate second-by-second vehicle emissions at urban roundabouts. The distributions of time spent in each VSP mode from instantaneous vehicle trajectory data gathe…

Understanding the current state of practice in the construction and demolition waste sector through the lenses of circular economy: The Italian recycled materials market for the road construction sector

Construction and demolition waste (CeDw) is mainly produced during the construction, demolition, or renovation activities of civil engineering structures and it accounts for a remarkable amount of the total C&Dw generated, as it is estimated to be around 30%. This proportion differs between countries belonging to different types of economies and tends to be greater in countries with developing economies reaching 74% of total annual production. There is a plethora of applications that C&Dw can be used for under a circular economic model and in this research a focus is being given in the exploitation of C&Dw within the pavement engineering sector, and more specifically, in the uti…

Estimating pollutant emissions based on speed profiles at urban roundabouts: A pilot study

The paper describes the pilot study conducted to assess the feasibility of the empirical approach utilizing vehicle trajectory data from a smartphone app and the Vehicle-Specific Power methodology to estimate pollutant emissions at urban roundabouts. The goal of this research phase is to acquire instantaneous speed data from a sample of six roundabouts located in the road network of the City of Palermo, Italy, and quantify emissions generated by the test vehicle through the examined roundabouts. For the case studies of roundabouts acceleration events in the circulating and exiting areas contributed to about 25% of the emissions for a given speed profile. More in general, the results from th…

Increasing the Use of Reclaimed Asphalt in Italy towards a Circular Economy: A Top-Down Approach

This contribution concerns recommendations which could be made to Italian regulatory bodies to improve their use of reclaimed asphalt (RA) in the road engineering sector. It is essential for the use of RA to be established as a standard practice since it has been proven that it can serve as an end-of-waste product that complies with the principles of a circular economy within both an open- and a closed-loop approach [1,2]. Several aspects will be covered, starting with an analysis of European nations whose economies can be classed as “more circular” compared to Italy’s. This refers to nations which have a high usage of RA. Furthermore, nations which have clear regulatory guidelines on the u…

Super-Resolution Images Methodology Applied to UAV Datasets to Road Pavement Monitoring

The increasingly widespread use of smartphones as real cameras on drones has allowed an ever-greater development of several algorithms to improve the image’s refinement. Although the latest generations of drone cameras let the user achieve high resolution images, the large number of pixels to be processed and the acquisitions from multiple lengths for stereo-view often fail to guarantee satisfactory results. In particular, high flight altitudes strongly impact the accuracy, and result in images which are undefined or blurry. This is not acceptable in the field of road pavement monitoring. In that case, the conventional algorithms used for the image resolution conversion, such as the bilinea…

Digital & Documentation - The new boundaries of digital &documentation - Vol. 4