Silanol-POSS as dispersing agents for carbon nanotubes in polyamide

Silanol polyhedrad oligomeric silsesquiosane terminated with phenyl rings (phPOSS) has been considered as dispersing agent for carbon nanotubes (CNTs) in polyamide (PA) matrix. Two different approaches have been followed for the introduction of the phPOSS molecules: a “classical” approach which involves the introduction of the dispersing agent during the melt mixing, and an “innovative” approach, consisting in the immobilization, either covalent and non-covalent, of phPOSS molecules onto CNTs surface. The properties of PA-based nanocomposites, containing free phPOSS molecules and phPOSS molecules immobilized onto the CNTs outer surface, have been evaluated through rheological, mecha…

Study of a structural change in bitumen induced by the photooxidation aging method

Nanocompositi a base polimerica a durabilità modulata mediante il controllo delle proprietà antiossidanti di nanostrutture carboniose

Use of Biochar as Filler for Biocomposite Blown Films: Structure-Processing-Properties Relationships

In this work, biocomposite blown films based on poly(butylene adipate-co-terephthalate) (PBAT) as biopolymeric matrix and biochar (BC) as filler were successfully fabricated. The materials were subjected to a film-blowing process after being compounded in a twin-screw extruder. The preliminary investigations conducted on melt-mixed PBAT/BC composites allowed PBAT/BC 5% and PBAT/BC 10% to be identified as the most appropriate formulations to be processed via film blowing. The blown films exhibited mechanical performances adequate for possible application as film for packaging, agricultural, and compost bags. The addition of BC led to an improvement of the elastic modulus, still maintaining h…

Pro-Degradant Activity of Naturally Occurring Compounds on Polyethylene in Accelerate Weathering Conditions

In this work, naturally occurring compounds, such as Vitamin E (VE) and Ferulic Acid (FA), at high concentrations, have been considered as pro-degradant agents for Low Density Polyethylene (PE). However, all obtained results using the naturally occurring molecules as pro-oxidant agents for PE have been compared with the results achieved using a classical pro-oxidant agent, such as calcium stearate (Ca stearate) and with neat PE. The preliminary characterization, through rheological, mechanical and thermal analysis, of the PE-based systems highlights that the used naturally occurring molecules are able to exert a slight plasticizing action on PE and subsequently the PE rigidity and crystalli…

Sonication-Induced Modification of Carbon Nanotubes: Effect on the Rheological and Thermo-Oxidative Behaviour of Polymer-Based Nanocomposites.

The aim of this work is the investigation of the effect of ultrasound treatment on the structural characteristics of carbon nanotubes (CNTs) and the consequent influence that the shortening induced by sonication exerts on the morphology, rheological behaviour and thermo-oxidative resistance of ultra-high molecular weight polyethylene (UHMWPE)-based nanocomposites. First, CNTs have been subjected to sonication for different time intervals and the performed spectroscopic and morphological analyses reveal that a dramatic decrease of the CNT's original length occurs with increased sonication time. The reduction of the initial length of CNTs strongly affects the nanocomposite rheological behavio…

Tunable radical scavenging activity of carbon nanotubes through sonication

Abstract Carbon nanotubes (CNTs) having controlled radical scavenging activity have been achieved tuning the content of their lattice defects induced by an ultra-sound (us) treatment. The reactivity of CNTs, subjected to ultra-sonication for different time intervals, toward 1,1-diphenyl-2-pycryl (DPPH) and hydroxyl (•OH) radicals has been estimated and related to defect concentration, evaluated through Raman spectrometry. The radical scavenging efficiency of ultra-sound treated CNTs (us-CNTs) increases with increasing the content of the structural defects, suggesting that the defect resulting from us treatment can be capitalized to obtain an amplified and controlled radical scavenging activ…

Preliminary Evaluation of Plasmix Compound from Plastics Packaging Waste for Reuse in Bituminous Pavements

Finding an appropriate technical solution for reusing waste plastics is crucial for creating a circular plastic economy. Although mechanical recycling is the best option for recycling post-consumer plastics, some heterogeneous mixed plastics cannot be recycled to produce secondary material due to their very low properties. In this case, alternative routes should be considered in order to limit their disposal as much as possible. Therefore, in order to solve the environmental problems in the landfills of plastic waste recycling, and to improve the mechanical performance of bitumen for road pavement, the reuse of these post-consumer plastic wastes are preliminarily evaluated for the modificat…

Improved carbon nanotubes dispersion through polar dispersant agents in polyamide

The potential enhancement of the nanocomposite properties, with respect to the neat matrix, is strictly related to uniform distribution and dispersion of the nanofillers in the host polymer. In this work, two dispersant agents, particularly a polar wax and a silanol polyhedral oligomeric silsesquioxanes POSS, have been used in order to improve the dispersion of bare and functionalized carbon nanotubes in polyamide matrix. To ensure a good compatibility between matrix and nanofillers, the dispersing agents having specific polarity have been chosen, in order to match that of the matrix. Significant alterations of the mechanical and rheological behaviour due to dispersion action of used additi…

Effect of Nanodiamonds on Structure and Durability of Polyethylene Oxide-Based Nanocomposites

Polymer-based nanocomposites containing nanodiamonds (NDs) are attractive multifunctional materials with a growing range of applications. In this work, in the frame of developing completely biocompatible systems, nanocomposites based on polyethylene oxide (PEO) and different amount of NDs have been formulated through melt mixing and fully characterized. In particular, the reinforcement effect of NDs in PEO has been probed through tensile tests, and the rheological response of PEO-based nanocomposites as a function of the nanoparticles amount has been investigated and discussed. The obtained results show that the presence of well-distributed NDs strengthens the mechanical performance of the …

Waste polymers as bitumen additive: characterization and properties

Improvement of oxidation resistance of polymer-based nanocomposites through sonication of carbonaceous nanoparticles

Abstract The work aim is focused on two different aspects: first, the investigation of the effect of extended ultra-sound-assisted treatment (us) of carbonaceous nanoparticles, such as carbon nanotubes (CNTs) and carbon black (CB), on their radical scavenging activity, and second, the investigation of the oxidative resistance of polymer-based nanocomposites, containing us-treated CNTs and CB. Particularly, the CNTs and CB have been subjected to us sonication for different time intervals and the performed analysis reveals that both kinds of nanoparticles show decreased average hydrodynamic diameters and large content of surface defects. Really, the increased content of CNTs and CB defects, a…

Biocomposite PBAT/lignin blown films with enhanced photo-stability.

Lignin can be obtained as a byproduct during cellulose-rich pulp fibers production and it is habitually treated as waste or intended for low-value destinations. However, due to UV absorption and mechanical properties, lignin can contribute to the fabrication of biodegradable blown films with superior performances. In this study, it was established the suitability of lignin for manufacturing biocomposite PBAT blown films with higher stiffness and photo-oxidation resistance. The effect of the filler concentration on the melt rheological behavior in non-isothermal elongational flow was investigated. The results allowed us to choose the correct filler concentration for producing films through a…

Mechanical and rheological properties of polystyrene-block-polybutadiene-block-polystyrene copolymer reinforced with carbon nanotubes: effect of processing conditions

Abstract Styrene-b-butadiene-b-styrene (SBS)-based nanocomposites filled with unmodified and –COOH functionalized carbon nanotubes (CNTs) have been formulated at different processing conditions in order to provide an understanding of the influence of the processing temperature and mixing speed on the nanofillers dispersion and on the overall properties of the nanocomposites. The evaluation of the nanocomposites’ mechanical and rheological behavior reveals that the effect of the processing speed on the final properties is almost negligible. Differently, the processing temperature influences strongly the mechanical and rheological properties of SBS-based nanocomposites. Indeed, for the nanoco…

Effect of Short-Term and UV Irradiation Aging on the Behaviour of SBS-Modified Bitumen

To obtain road bitumen with improved temperature and fatigue resistance, polymers and/or rubbers could be added to it. A particularly suitable polymer for bitumen modification is styrene-butadiene-styrene (SBS) copolymer but limited information is available about the ageing behaviour of modified binders. In this work, two neat bitumens, with different penetration grades, and two SBS-modified bitumens, containing different SBS amounts, were selected, and their short-term and UVB ageing behaviour were investigated considering dynamic shear rheometry and Attenuated Total Reflectance-Fourier Transformation InfraRed spectroscopy (ATR-FTIR). Short-time ageing behaviour was investigated performing…

A Fractional-Order Model of Biopolyester Containing Naturally Occurring Compounds for Soil Stabilization

Currently, the use of polymers and biopolymers as soil-stabilizer additives for control of the soil degradation, deterioration, and desertification and for improving the arid and semiarid soils has been expanded significantly in the agricultural sector. This research was conducted to determine the effect of naturally occurring compounds, such as quercetin (Q) and sodium montmorillonite (NaMMt) at different weight ratios, in biopolyester, such as polylactic acid (PLA), aiming to formulate ecosustainable materials to control the soil degradation and to protect the environment. As known, the use of sophisticated analytical tools to describe the material rheology and melting properties is nowad…

Radical scavenging activity of ultrasound-treated Carbon Nanotubes

Carbon nanotubes (CNTs) having controlled radical activity have been achieved tuning the content of their lattice defects induced by an ultra-sound (us) treatment.