In-situ high spatial resolution LA-MC-ICPMS 230Th/U dating enables detection of small-scale age inversions in speleothems

2017

Abstract We present an in-situ method for Th and U isotope measurements by laser ablation multi-collector inductively coupled plasma mass spectrometry (LA-MC-ICPMS) to determine possible age inversions of stalagmites, using a 213 nm Nd:YAG laser connected to an MC-ICPMS. Due to the low ion beam intensity of 230 Th (20–120 counts per second, cps), we carefully optimized the operating parameters to get highest possible ion beam intensities, i.e., laser fluence (25 J cm −2 ), spot size (110 μm), pulse repetition rate (20 Hz), scan speed (4 μm s −1 ), integration time (1000 s), and He and Ar gas flow (∼0.9 L min −1 and ∼0.6 L min −1 respectively). A precision (2 relative standard error, 2RSE) o…

Determination of Reference Values for NIST SRM 610-617 Glasses Following ISO Guidelines

2011

We present new reference values for the NIST SRM 610–617 glasses following ISO guidelines and the International Association of Geoanalysts’ protocol. Uncertainties at the 95% confidence level (CL) have been determined for bulk- and micro-analytical purposes. In contrast to former compilation procedures, this approach delivers data that consider present-day requirements of data quality. New analytical data and the nearly complete data set of the GeoReM database were used for this study. Data quality was checked by the application of the Horwitz function and by a careful investigation of analytical procedures. We have determined quantitatively possible element inhomogeneities using different …

Non-Matrix-Matched Calibration for the Multi-Element Analysis of Geological and Environmental Samples Using 200 nm Femtosecond LA-ICP-MS: A Compariso…

2014

LA-ICP-MS is one of the most promising techniques for in situ analysis of geological and environmental samples. However, there are some limitations with respect to measurement accuracy, in particular for volatile and siderophile/chalcophile elements, when using non-matrix-matched calibration. We therefore investigated matrix-related effects with a new 200 nm femtosecond (fs) laser ablation system (NWRFemto200) using reference materials with different matrices and spot sizes from 10 to 55 μm. We also performed similar experiments with two nanosecond (ns) lasers, a 193 nm excimer (ESI NWR 193) and a 213 nm Nd:YAG (NWR UP-213) laser. The ion intensity of the 200 nm fs laser ablation was much l…

Whole-Ocean Changes in Silica and Ge/Si Ratios During the Last Deglacial Deduced From Long-Lived Giant Glass Sponges

2017

Microanalytical methods for in-situ high-resolution analysis of rock varnish at the micrometer to nanometer scale

2015

Abstract A wide range of analytical techniques were used to investigate rock varnish from different locations (Negev, Israel; Knersvlakte, South Africa; Death Valley and Mojave Desert, California): a 200 nm-femtosecond laser ablation-inductively coupled plasma-mass spectrometer (LA-ICP-MS), an electron probe microanalyzer (EPMA), focused ion beam (FIB) slicing, and scanning transmission X-ray microscopy–near edge X-ray absorption fine structure spectroscopy (STXM–NEXAFS). This combination enables comprehensive high-spatial-resolution analysis of rock varnish. Femtosecond LA-ICP-MS and EPMA were used for quantitative determination of element concentrations. In-situ measurements were conducte…

Zinc isotopes in Late Pleistocene fossil teeth from a Southeast Asian cave setting preserve paleodietary information

2020

Significance Dietary habits, especially meat consumption, represent a key aspect in the behavior and evolution of fossil hominin species. Here, we explore zinc (Zn) isotope ratios in tooth enamel of fossil mammals. We show discrimination between different trophic levels and demonstrate that Zn isotopes could prove useful in paleodietary studies of fossil hominin, or other mammalian species, to assess their consumption of animal versus plant resources. We also demonstrate the high preservation potential of pristine diet-related Zn isotope ratios, even under tropical conditions with poor collagen preservation, such as the studied depositional context in Southeast Asia. However, assessing the …

Chemical composition of modern and fossil hippopotamid teeth and implications for paleoenvironmental reconstructions and enamel formation – Part 2: A…

2012

Abstract. For reconstructing environmental change in terrestrial realms the geochemistry of fossil bioapatite in bones and teeth is among the most promising applications. This study demonstrates that alkaline earth elements in enamel of Hippopotamids, in particular Ba and Sr are tracers for water provenance and hydrochemistry. The studied specimens are molar teeth from Hippopotamids found in modern and fossil lacustrine settings of the Western Branch of the East African Rift system (Lake Kikorongo, Lake Albert, and Lake Malawi) and from modern fluvial environments of the Nile River. Concentrations in enamel vary by ca. two orders of magnitude for Ba (120–9336 μg g−1) as well as for Sr (9–21…

Investigation of matrix effects in 193nm laser ablation-inductively coupled plasma-mass spectrometry analysis using reference glasses of different tr…

2012

Abstract The degree of transparency of glasses, which depends on the Fe content, may influence the ablation behavior during laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) analysis. To test possible matrix effects when using a 193 nm Nd:YAG laser, we have analyzed transparent and opaque NIST, BAM and USGS reference glasses. These reference materials are ideal for such investigations, because they are well characterized, most elements are homogeneously distributed at the micrometer scale, and their Fe content varies over a very large range, from 16 to 130,000 μg g− 1. Our measurements show that the fractionation factors of refractory and volatile lithophile elements, …

Geochemical insights into the relationship of rock varnish and adjacent mineral dust fractions

2020

Abstract Rock varnishes are μm-thin, dark, manganese(Mn)-rich crusts that accrete in the order of few μm/ka on weathering-resistant lithologies. Although these crusts can form in all climates, they are best known in arid to semi-arid settings. Aeolian dust is understood as a major contributor to the distinct trace metal and REE enrichments in rock varnish. However, the exact proportions of abiotic and biotic formation mechanisms that may explain the oxidation-reactions of Mn2+ to Mn4+, present as Mn oxyhydroxides in the varnish, are still a matter of ongoing debate. We present here the first systematic study of trace element enrichment processes between the uppermost layer of the varnish se…

Accurate trace element analysis of speleothems and biogenic calcium carbonates by LA-ICP-MS

2012

The high spatial resolution of laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) microanalysis of speleothems and biogenic calcium carbonates makes it possible to improve our understanding of past climatic conditions. However, there are analytical problems associated with this method, such as molecular interferences, elemental fractionation, and mass-load-dependent matrix effects, when using NIST silicate reference glasses for calibration. Our study with a sector-field ICP-MS shows that many masses are affected by interferences, such as 24Mg+ by 48Ca++ or 31P+ by 15N16O+. Elemental fractionation and mass-load-dependent matrix effects have been detected for both 213 and…

A New Find of Danburite in the Luc Yen Mining Area, Vietnam

2017

FeMnOx-1: A new microanalytical reference material for the investigation of Mn–Fe rich geological samples

2016

Suitable Mn-Fe rich microanalytical reference materials (MRMs) as calibration material for laser ablation-inductively coupled plasma mass spectrometry (LA-ICPMS) have not been available. The United States Geological Survey (USGS) in collaboration with the Max Planck Institute for Chemistry has prepared a synthetic MRM, FeMnOx-1, with elevated mass fractions of MnO (25 g/100 g), Fe2O3 (8.5 g/100 g) and high mass fractions of 25 trace elements varying between 200 and 5000 mg/kg. This new MRM has been designed as calibration material for a wide range of different Mn-Fe deposits, such as desert/rock varnish, ocean crusts and nodules as well as Mn accumulations in soils and lakes. Small-scale an…

Nano‐Powdered Calcium Carbonate Reference Materials: Significant Progress for Microanalysis?

2019

Trace element variability in single ostracod valves as a proxy for hydrochemical change in Nam Co, central Tibet, during the Holocene

2014

Ostracod shells, belonging to three taxa (Leucocytherella sinensis Huang, 1982, ?Leucocythere dorsotuberosa Huang, 1982 and ?L. dorsotuberosa f. postilirata sensu Pang, 1985), were collected from two sediment cores from Lake Nam Co, on the central Tibetan Plateau. Two variants of LA–ICP–MS (laser ablation–inductively coupled plasma–mass spectrometry), spot and line-scan analyses, were used to investigate trace element concentrations (Mg, Sr, Ba, U and rare earth elements [REEs]) in single ostracod shells. The results suggest that the line-scan method can provide better precision than the spot analysis and is therefore preferred. No significant difference in trace element composition between…

Characterization and differentiation of rock varnish types from different environments by microanalytical techniques

2017

© 2017 Elsevier B.V. We investigated rock varnishes collected from several locations and environments worldwide by a broad range of microanalytical techniques. These techniques were selected to address the challenges posed by the chemical and structural complexity within the micrometer- to nanometer-sized structures in these geological materials. Femtosecond laser ablation-inductively coupled plasma-mass spectrometry (fs LA-ICP-MS), scanning transmission X-ray microscopy-near edge X-ray adsorption fine structure spectroscopy (STXM-NEXAFS) in combination with scanning electron microscopy (SEM) of focused ion beam (FIB) ultra-thin (100–200 nm) sections, conventional and polarization microscop…

Influence of Compensating Defect Formation on the Doping Efficiency and Thermoelectric Properties of Cu2-ySe1–xBrx

2015

The superionic conductor Cu_(2−δ)Se has been shown to be a promising thermoelectric at higher temperatures because of very low lattice thermal conductivities, attributed to the liquid-like mobility of copper ions in the superionic phase. In this work, we present the potential of copper selenide to achieve a high figure of merit at room temperature, if the intrinsically high hole carrier concentration can be reduced. Using bromine as a dopant, we show that reducing the charge carrier concentration in Cu_(2−δ)Se is in fact possible. Furthermore, we provide profound insight into the complex defect chemistry of bromine doped Cu_(2−δ)Se via various analytical methods and investigate the conseque…