0000000000146731
AUTHOR
Juris Bitenieks
Characterization of thermoelectric and thermogravimetric properties of conductive PEDOT:PSS films blended with SWCNTs and PVA
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) was blended with polyvinyl alcohol (PVA) and single-walled carbon nanotube (SWCNT) filler to form composites with thermoelectric properties. Studied samples were obtained by drop coating and solution casting methods. Thermoelectric measurements of PEDOT:PSS demonstrated that the addition of 5 wt. % SWCNTs increased the Seebeck coefficient value from 8.0 μV/K to 23.6 μV/K, while in the case of PEDOT:PSS/PVA blended with 5 wt. % SWCNT Seebeck coefficient value of 20.3 μV/K was achieved. Thermogravimetric analysis showed slight SWCNT effect on thermal stability of the investigated systems.
Growth mechanisms and related thermoelectric properties of innovative hybrid networks fabricated by direct deposition of Bi2Se3 and Sb2Te3 on multiwalled carbon nanotubes
Abstract Flexible thermoelectric generators are an emerging trend in the field of waste heat conversion, as well as wearable and autonomous devices. However, the energy conversion efficiency of the state-of-the-art flexible thermoelectric devices is too low for their wide application and commercialization. In this work, n- and p-type multiwalled carbon nanotube (MWCNT)-thermoelectric material hybrid networks that may become a promising building block for the fabrication of flexible thermoelectric devices are presented. The hybrid networks were fabricated by direct deposition of thermoelectric material (Bi2Se3, Sb2Te3) on the MWCNT networks using physical vapor deposition technique. Growth m…
Elastic properties of UV irradiated polyethylene-octene copolymer composites with functionalized multi-walled carbon nanotubes
ABSTRACTPolyethylene-octene copolymer (E38) is melt compounded with carboxylated carbon nanotubes (CNT-COOH) in the presence of maleic anhydride grafted polyethylene (PEgMA). The effects of CNT-COOH in the amount of 1–10 wt. % on the mechanical properties of E38 based composite are investigated. It is revealed that addition of CNT-COOH considerably increases the stiffness and mechanical strength of the E38 based composites. The effect of UV irradiation on the structure as well as on the mechanical properties of E38/PEgMA/CNT-COOH composites is also investigated. Results of the investigation testify that UV resistance of the E38 based composites increases by increasing the content of CNT-COO…
Modeling and stress-strain characteristics of the mechanical properties of carbon-nanotube-reinforced poly(vinyl acetate) nanocomposites
Polymer/carbon nanotube (CNT) composites are one of the most perspective advanced materials developed in recent years. The properties of CNT-reinforced polymer composites, however, strongly depend on structural aspects of the nanostructured filler and on its dispersion quality in a polymer matrix. Consequently, this research was devoted to the investigation of multiwalled-CNT-modified poly(vinyl acetate) (PVAc) composites with respect to the mechanical property dependence on some structural characteristics of CNTs. PVAc/CNT nanocomposites were obtained with a solution casting technique. The amount of CNTs was changed from 0.01 up to 2 wt %. The stress–strain characteristics of PVAc/CNT nano…
Properties of PP/MWCNT-COOH /PP composites made by melt mixing versus solution cast /melt mixing methods
An approach on improvement of the properties of polypropylene / carbon nanotube (PP/CNT) composites is reported. PP blend compositions with carboxylic acid functionalized multi-walled carbon nanotubes (MWCNT-COOH) at filler content 1.0 wt.% were researched. One part of the composites was manufactured by direct thermoplastic mixing PP with the filler, but the other one was made from solution casted masterbatch with the following thermoplastic mixing. An increase of mechanical properties (Young's modulus, storage modulus and tensile strength), compared to an increase of glass transition temperature indicated a reinforcement effect of CNTs on PP matrix, determined from the tensile tests and di…