0000000000167975

AUTHOR

David Watson

showing 8 related works from this author

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

2023

Background: Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods: This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, r…

general surgeryacute care surgerySettore MED/18 - CHIRURGIA GENERALEclimate change; trauma; general surgery; acute care surgerySettore MED/40 - Ginecologia E Ostetriciaenvironmental impactsurgerySettore MED/31 - Otorinolaringoiatriaclimate changetraumaNoneMedicine and Health SciencesSurgeryoperating theatreenvironment
researchProduct

Flexible integration of robotics, ultrasonics and metrology for the inspection of aerospace components

2016

The performance of modern robotic manipulators has allowed research in recent years, for the development of fast automated non-destructive testing (NDT) of complex geometries. Contemporary robots are well suited for their accuracy and flexibility when adapting to new tasks. Several robotic inspection prototype systems and a number of commercial products have been created around the world. This paper describes the latest progress of a new phase of the research applied to a composite aerospace component of size 1 by 3 metres. A multi robot flexible inspection cell was used to take the fundamental research and the feasibility studies to higher technology readiness levels, all set for future in…

0209 industrial biotechnologyEngineeringTK02 engineering and technologyMetrologyPhased array ultrasonicsSettore ING-IND/14 - Progettazione Meccanica E Costruzione Di Macchine020901 industrial engineering & automationSoftwareData acquisitionUltrasonicsAerospaceSimulationSystem integrationbusiness.industryPayloadInspectionRoboticsControl engineeringRobotics021001 nanoscience & nanotechnologyRobot controlRobotArtificial intelligence0210 nano-technologybusinessAerospace componentsAIP Conference Proceedings
researchProduct

SARS-CoV-2 infection and venous thromboembolism after surgery: an international prospective cohort study

2021

SARS-CoV-2 has been associated with an increased rate of venous thromboembolism in critically ill patients. Since surgical patients are already at higher risk of venous thromboembolism than general populations, this study aimed to determine if patients with peri-operative or prior SARS-CoV-2 were at further increased risk of venous thromboembolism. We conducted a planned sub-study and analysis from an international, multicentre, prospective cohort study of elective and emergency patients undergoing surgery during October 2020. Patients from all surgical specialties were included. The primary outcome measure was venous thromboembolism (pulmonary embolism or deep vein thrombosis) within 30 da…

Malepulmonary embolismInternationalitySettore MED/18 - CHIRURGIA GENERALEDeep veinVascular damage Radboud Institute for Health Sciences [Radboudumc 16]infectious diseasesCardiovascularSARS‐CoV‐2surgeryCOVID-19 ; SARS-CoV-2 ; deep vein thrombosis ; pulmonary embolism ; venous thromboembolismCohort StudiesPostoperative ComplicationsAnesthesiologyMedicine and Health SciencesProspective Studies610 Medicine & healthProspective cohort studyLung11 Medical and Health SciencesConfoundingHematologyMiddle AgedThrombosis17 Psychology and Cognitive SciencesCOVID-19; deep vein thrombosis; pulmonary embolism; SARS-CoV-2; venous thromboembolismPulmonary embolismCOVID-19; SARS-CoV-2; deep vein thrombosis; pulmonary embolism; venous thromboembolism.medicine.anatomical_structureCohortCOVID-19/complicationsPostoperative Complications/etiologyOriginal ArticleFemalePatient SafetyLife Sciences & BiomedicineCOVID-19; SARS-CoV-2; deep vein thrombosis; pulmonary embolism; venous thromboembolismHumanAdultmedicine.medical_specialtyAdolescentClinical Sciencesvenous thromboembolism610 Medicine & healthGlobalSurg CollaborativeVenous Thromboembolism/etiologydeep vein thrombosisNOCOVIDSurg CollaborativeYoung AdultMedicine General & InternalAge DistributionClinical ResearchCOVID‐19General & Internal MedicinemedicineHumansSex DistributionAgedScience & Technologybusiness.industrySARS-CoV-2PreventionNeurosciencesdeep vein thrombosiCOVID-19PneumoniaOdds ratioOriginal Articlesmedicine.diseaseSurgeryReconstructive and regenerative medicine Radboud Institute for Health Sciences [Radboudumc 10]Prospective StudieGood Health and Well BeingAnesthesiology and Pain MedicineHuman medicinePostoperative ComplicationCohort StudiebusinessVenous thromboembolism[SDV.MHEP]Life Sciences [q-bio]/Human health and pathology
researchProduct

Robotic geometric and volumetric inspection of high value and large scale aircraft wings

2019

Increased demands in performance and production rates require a radical new approach to the design and manufacturing of aircraft wings. Performance of modern robotic manipulators has enabled research and development of fast automated non-destructive testing (NDT) systems for complex geometries. This paper presents recent outcomes of work aimed at removing the bottleneck due to data acquisition rates, to fully exploit the scanning speed of modern 6-DoF manipulators. The geometric assessment of the parts is carried out with a robotised dynamic laser scanner encoded through an absolute laser tracker. This method allows scanning speeds up to 330mm/s at 1mm pitch. State of the art ultrasonic ins…

0209 industrial biotechnologyLaser scanningComputer sciencebusiness.industryPhased array02 engineering and technology01 natural sciencesSettore ING-IND/14 - Progettazione Meccanica E Costruzione Di Macchine020901 industrial engineering & automationData acquisitionLaser trackerNondestructive testing0103 physical sciencesCFRP Laser scanning Phased array Robotic NDTSystem integrationUltrasonic sensorInstrumentation (computer programming)business010301 acousticsComputer hardware
researchProduct

Effects of pre-operative isolation on postoperative pulmonary complications after elective surgery: an international prospective cohort study

2021

We aimed to determine the impact of pre-operative isolation on postoperative pulmonary complications after elective surgery during the global SARS-CoV-2 pandemic. We performed an international prospective cohort study including patients undergoing elective surgery in October 2020. Isolation was defined as the period before surgery during which patients did not leave their house or receive visitors from outside their household. The primary outcome was postoperative pulmonary complications, adjusted in multivariable models for measured confounders. Pre-defined sub-group analyses were performed for the primary outcome. A total of 96,454 patients from 114 countries were included and overall, 26…

Lung DiseasesMaleInternationalitySARS-Cov-2 ; COVID-19 ; surgery ; pathways ; pre-operative isolationSettore MED/18 - CHIRURGIA GENERALEVascular damage Radboud Institute for Health Sciences [Radboudumc 16]pathwaysLung DiseaseESTUDOS PROSPECTIVOSCohort StudiesPatient IsolationsurgeryPostoperative Complications80 and overProspective StudiesProspective cohort study610 Medicine & healthAged 80 and overSARS-Cov-2; COVID-19; surgery; pathways; pre-operative isolationIncidence (epidemiology)Treatment OutcomeElective Surgical ProceduresFemaleElective Surgical ProcedureCohort studyHumanpre-operative isolationmedicine.medical_specialtyIsolation (health care)SARS-Cov-2Preoperative careNOCOVID-19; SARS-Cov-2; pathways; pre-operative isolation; surgeryAnesthesiologyPreoperative CaremedicineHumansElective surgeryLS7_4AgedElective Surgical Procedurebusiness.industrypathwayCOVID-19SurgeryReconstructive and regenerative medicine Radboud Institute for Health Sciences [Radboudumc 10]Prospective StudieAnesthesiology and Pain MedicineHuman medicinePostoperative ComplicationCohort Studiebusiness[SDV.MHEP]Life Sciences [q-bio]/Human health and pathology
researchProduct

HiTOP Assessment of the Somatoform Spectrum and Eating Disorders

2021

We report on Phase 1 efforts of the Hierarchical Taxonomy of Psychopathology (HiTOP) measurement subgroup tasked with developing provisional scales for the somatoform spectrum and eating disorders. In Study 1, items were written to assess five somatoform spectrum constructs (bodily distress symptoms, conversion symptoms, health anxiety, disease conviction, and somatic preoccupation). Scale development analyses were conducted on 550 university students. The conversion symptom items were too infrequently endorsed and were set aside for Phase 2. Analyses of the other items yielded four scales corresponding closely to their hypothesized structure. In Study 2, we delineated 15 specific feeding a…

050103 clinical psychologyPsychopathology05 social sciencesScale developmentSomatic symptom disordermedicine.disease030227 psychiatryFeeding and Eating Disorders03 medical and health sciencesClinical PsychologyEating disorders0302 clinical medicineSurveys and QuestionnairesTaxonomy (general)Body ImagemedicineHumans0501 psychology and cognitive sciencesSomatoform DisordersPsychologyBinge-Eating DisorderApplied PsychologyPsychopathologyClinical psychologyAssessment
researchProduct

Fast ultrasonic phased array inspection of complex geometries delivered through robotic manipulators and high speed data acquisition instrumentation

2016

Performance of modern robotic manipulators has enabled research and development of fast automated non-destructive testing (NDT) systems for complex geometries. This paper presents recent outcomes of work aimed at removing the bottleneck due to data acquisition rates, to fully exploit the scanning speed of modern 6-DoF manipulators. State of the art ultrasonic instrumentation has been integrated into a large robot cell to enable fast data acquisition, high scan resolutions and accurate positional encoding. A fibre optic connection between the ultrasonic instrument and the server computer enables data transfer rates up to 1.6GB/s. Multiple data collection methods are compared. Performance of …

0209 industrial biotechnologybusiness.industryPhased arrayComputer scienceTKFrame (networking)Electrical engineering02 engineering and technology01 natural sciencesPhased array ultrasonics020901 industrial engineering & automationData acquisitionLinear ScanNondestructive testingPhased array0103 physical sciencesFMCUltrasonic sensorInstrumentation (computer programming)CFRPbusiness010301 acousticsRobotic NDTComputer hardwareData transmission
researchProduct

sj-pdf-1-asm-10.1177_10731911211020825 – Supplemental material for HiTOP Assessment of the Somatoform Spectrum and Eating Disorders

2021

Supplemental material, sj-pdf-1-asm-10.1177_10731911211020825 for HiTOP Assessment of the Somatoform Spectrum and Eating Disorders by Martin Sellbom, Kelsie T. Forbush, Sara R. Gould, Kristian E. Markon, David Watson and Michael Witthöft in Assessment

FOS: Psychology160807 Sociological Methodology and Research Methods170199 Psychology not elsewhere classifiedFOS: Sociology
researchProduct