showing 7 related works from this author
Dielectrophoresis as an assembly method for carbon nanotube memory elements
2010
The experiments described in this Master's thesis aim to assess the practicality of using dielectrophoresis (DEP) for assembling memory elements from carbon nanotubes (CNTs). These elements were field-effect transistors (FETs) with a wide hysteresis window. The devices assessed were made on a silicon substrate with a HfO2 - TiO2 - HfO2 gate dielectric layer to ensure a predictable hysteresis for memory operation. The FETs were used for further research in regard to environmental effects in their operation. An average yield of 12.5 % over 26 different trapping attempts, a total of 650 gaps, was achieved for single trapped CNTs in a two-electrode configuration with a 1 µm gap between electrod…
Collective optical resonances in networks of metallic carbon nanotubes
2013
Abstract We demonstrate that thin films of randomly oriented metallic single-walled carbon nanotubes possess optical resonances with significant dispersion. The resonances are observed in the Kretschmann configuration as minima in reflection spectra close to 400 nm and 700 nm wavelengths. The dispersions are visible only when the material is excited with s -polarized light, and most prominent in layers with thickness near 100 nm. We conclude that magnetic plasmon polaritons arising from intertube interactions are a likely explanation. Closeness of the M 11 and M 22 transition energies to the observed resonances points to a possible coupling with excitons.
Surface plasmon effects on carbon nanotube field effect transistors
2011
Herein, we experimentally demonstrate surface plasmon polariton (SPP) induced changes in the conductivity of a carbon nanotube field effect transistor (CNT FET). SPP excitation is done via Kretschmann configuration while the measured CNT FET is situated on the opposite side of the metal layer away from the laser, but within reach of the launched SPPs. We observe a shift of 0.4 V in effective gate voltage. SPP-intermediated desorption of physisorbed oxygen from the device is discussed as a likely explanation of the observed effect. This effect is visible even at low SPP intensities and within a near-infrared range. peerReviewed
Measuring optical anisotropy in poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) films with added graphene
2015
Abstract Graphene is a 2D nanomaterial having a great potential for applications in electronics and optoelectronics. Composites of graphene with conducting polymers have shown high performance in practical devices and their solution-processability enables low-cost and high-throughput mass manufacturing using printing techniques. Here we measure the effect of incorporation of graphene into poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) to the optical anisotropy, absorbance and conductivity of the film. Uniaxial anisotropy in PEDOT:PSS films has been thought to be caused by the spin-coating process used in fabrication. We have characterized spray- and spin-coated films …
Optical properties of conductive carbon-based nanomaterials
2016
The interaction of light with carbon nanomaterials is the main focus of this thesis. I explore several nanostructured systems involving different allotropes of carbon, and characterize them both electrically, if applicable, and optically. Special attention is paid to search for plasmon-like excitations on the systems, or utilizing surface plasmons on characterization. The first objective is to achieve control of carbon nanotube (CNT) conductivity with surface plasmon polaritons (SPPs), which resulted in the first CNT field-effect transistor (FET) that can be gated definitively with SPPs. The second objective is the investigation of optical properties of various thin carbon-based molecular n…
Improved antifouling properties and selective biofunctionalization of stainless steel by employing heterobifunctional silane-polyethylene glycol over…
2016
AbstractA straightforward solution-based method to modify the biofunctionality of stainless steel (SS) using heterobifunctional silane-polyethylene glycol (silane-PEG) overlayers is reported. Reduced nonspecific biofouling of both proteins and bacteria onto SS and further selective biofunctionalization of the modified surface were achieved. According to photoelectron spectroscopy analyses, the silane-PEGs formed less than 10 Å thick overlayers with close to 90% surface coverage and reproducible chemical compositions. Consequently, the surfaces also became more hydrophilic, and the observed non-specific biofouling of proteins was reduced by approximately 70%. In addition, the attachment of E…
Conjugation with carbon nanotubes improves the performance of mesoporous silicon as Li-ion battery anode
2020
Carbon nanotubes can be utilized in several ways to enhance the performance of silicon-based anodes. In the present work, thermally carbonized mesoporous silicon (TCPSi) microparticles and single-walled carbon nanotubes (CNTs) are conjugated to create a hybrid material that performs as the Li-ion battery anode better than the physical mixture of TCPSi and CNTs. It is found out that the way the conjugation is done has an essential role in the performance of the anode. The conjugation should be made between negatively charged TCPSi and positively charged CNTs. Based on the electrochemical experiments it is concluded that the positive charges, i.e., excess amine groups of the hybrid material i…